eydj2008的专栏

1.二相步进电机细分驱动源码 STM32F103VCT6 2.STM32 + DMX512 接收程序 或（RS485） 3.光电编码器程序 （没有可开环控制） 4.FSMC TFT驱动程序带菜单功能 5.步进电机细分驱动程序 矢量控制 加减速控制，PWM斩波驱动方式。

w25n01gv revg 032116.pdf The W25N01GV (1G-bit) Serial SLC NAND Flash Memory provides a storage solution for systems with limited space, pins and power. The W25N SpiFlash family incorporates the popular SPI interface and the traditional large NAND non-volatile memory space. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The device operates on a single 2.7V to 3.6V power supply with current consumption as low as 25mA active and 10µA for standby. All W25N SpiFlash family devices are offered in space-saving packages which were impossible to use in the past for the typical NAND flash memory.

uint8_t Program_verify(uint8_t* buff1, uint8_t* buff2, uint32_t count); void WB_Serial_NAND_Pageprogram_Pattern(uint8_t addh, uint8_t addl, uint8_t* program_buffer, uint32_t count); void WB_Serial_NAND_Program_Excute(uint8_t addh, uint8_t addl); /* status check */ uint8_t WB_Check_Embedded_ECC(); uint8_t WB_Check_Program_Erase_Fail_Flag(); uint8_t WB_Read_Serial_NAND_StatusRegister(uint8_t sr_sel); void WB_Serial_NAND_ReadyBusy_Check(); uint32_t WB_NAND_Read_JEDEC_ID(); uint8_t WB_Serial_NAND_bad_block_check(uint32_t page_address); void WB_Serial_NAND_LUT_Read(uint16_t* LBA, uint16_t* PBA); /* Stack function for W25M series */ void WB_Die_Select(uint8_t select_die); /* status set */ void WB_Enable_Embedded_ECC(); void WB_Disable_Embedded_ECC(); void WB_Enable_Buffer_mode(); void WB_Disable_Buffer_mode(); void WB_Serial_NAND_StatusRegister_Write_SR1(uint8_t SR1); void WB_Serial_NAND_StatusRegister_Write_SR2(uint8_t SR2); void WB_Serial_NAND_StatusRegister_Write_SR3(uint8_t SR3); void WB_NAND_Reset(); void WB_Protect(); void WB_Unprotect(); void WB_Serial_NAND_LUT_Set(uint16_t LBA, uint16_t PBA); /* erase function */ void WB_Serial_NAND_BlockErase(uint8_t PA_H, uint8_t PA_L); /* read function */ void WB_Serial_NAND_PageDataRead(uint8_t PA_H, uint8_t PA_L); void WB_Serial_NAND_Normal_Read(uint8_t addh, uint8_t addl, uint8_t* buff, uint32_t count); void WB_Serial_NAND_Continuous_Normal_Read(uint8_t* buff, uint32_t count);

官网没找到模拟器 自己搭建了一个 ,找了很久要么版本对不上, 要么没有UI 建立器

下面一章概述了在目标系统上设置和配置 emWin 的基础步骤，其中还包括简单的程序示例。 如果有不确定的地方请参阅以后部分，后面章节中对大多数主题进行了更为详细的探讨。在您开始更复 杂的编程之前，您最有可能需要参考手册的其它部分。

QueryPerformanceCounter VC C++精确的时间测量的例子 精确到US级 PS时容易被打断

定时器，外部中断，键盘扫描，串口通讯，数码管扫描

ASP本地调试工具 ASP代码调试 非常方便使用ASP网站的站长 调试 直接在本地调试， 不用上传大量文件到服务器就可以调试的软件 NETweb.exe

最简单的文章管理系统 ASP程序编写 方便初学者或是快速的生成文章的个人网站

步进电机细分程序　39610+3771　供初学者参考