voyage 虚拟机安装过程-CSDN博客

voyage linux是基于Debian的linux发行版，常用于嵌入式，很轻巧，由于实验室嵌入式开发板使用的就是voyage ，使用的是voyage-0.7.iso版本

使用虚拟机加载镜像就可以启动，跟Ubuntu类似，启动后是一个read-only file system。

http://linux.voyage.hk/content/getting-started-live-cd-v07x

然后再按以下教程就可以安装，

需要注意的是：

step3不一定是/dev/hda，可以cat /proc/partions查看，否则step4中需要选择 disk device会有问题

在step4中有选择安装类型，选择的是 Generic PC，其他我都是选默认的

This README.live-cd provide information on how to install Voyage Linux from the
Live CD.

==============================================================================
Installing Voyage Linux to a hard disk from Live CD
==============================================================================

Afte booting the Live CD, login as root (password: voyage)

1. Create distribution directory for installation

# mkdir /tmp/root
# mount -o loop /lib/live/mount/medium/live/filesystem.squashfs /tmp/root
# cd /tmp/root

Note: for version < 0.9~rc2, use
mount -o loop /live/image/live/filesystem.squashfs /tmp/root

2. Make a mount point for installation disk

# mkdir /tmp/cf

3. Format target disk device

# /usr/local/sbin/format-cf.sh /dev/hda

This will create /dev/hda1 ext2 partition on /dev/hda disk device.
** Note that this operation is very dangerous since it will erase your disk!
Make sure what you are doing and must do it right!

4. Start voyage.update installation script

# /usr/local/sbin/voyage.update

Following the instruction to select /tmp/root as distribution directory, and
/tmp/cf as mount point. After the installation complete, simple reboot the
board and Voyage will be started!

Note: You may get read-only file system messages after exiting installation.
This is normal because your settings cannot be updated on a mounted squashfs.

There are some additional packages installed for PXE and NFS server. After
starting Voyage, you can safely remove them by:

# remountrw
# apt-get remove syslinux atftpd nfs-kernel-server \
bzip2 sg3-utils minicom

After all, remove the last line in /etc/dnsmasq.more.conf:
conf-file=/etc/dnsmasq.pxe.conf