CENTOS Device eth0 does not seem to be present

接复制了Oracle VM VirtualBox的镜像文件vdi 可以直接创建新的系统镜像真是方便，不过遇到了Device eth0 does not seem to be present 的问题解决方案如下

service network restart
Shutting down loopback insterface: [ OK ]
Bringing up loopback insterface: [ OK ]
Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization. [FAILED]

解决办法：
  
第一步  ： vi /etc/udev/rules.d/70-persistent-net.rules 内容如下面例子所示：

# vi /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0×1022:0×2000 (pcnet32)
SUBSYSTEM==”net”, ACTION==”add”, DRIVERS==”?*”, ATTR{address}==”08:00:27:7e:8c:e7″, ATTR{type}==”1″, KERNEL==”eth*”, NAME=”eth0″
# PCI device 0×1022:0×2000 (pcnet32)
SUBSYSTEM==”net”, ACTION==”add”, DRIVERS==”?*”, ATTR{address}==”08:00:27:30:c2:57″, ATTR{type}==”1″, KERNEL==”eth*”, NAME=”eth1″

记录下，eth1网卡的mac地址08:00:27:30:c2:57

第二步 ： vi /etc/sysconfig/network-scripts/ifcfg-eth1

将 DEVICE=”eth0″ 改成 DEVICE=”eth1″ ,
将 HWADDR=”08:00:27:7e:8c:e7″ 改成上面的mac地址 HWADDR=”08:00:27:30:c2:57″

第三步 ：重启网络 # service network restart 或者  # /etc/init.d/network restart