Vlan综合实验

一、在各个交换机上划分接口并配置

1.SW1

 

 

2.SW2

 

 

3.SW3

 

 

二、配置trunk，并放行vlan 

1.SW1

[SW1]int e0/0/1
[SW1-Ethernet0/0/1]port link-type trunk 
[SW1-Ethernet0/0/1]port trunk allow-pass vlan 2 3

2.SW2:

[SW2]int e0/0/2
[SW2-Ethernet0/0/2]port link-type trunk 
[SW2-Ethernet0/0/2]port trunk allow-pass vlan 2 3
[SW2-Ethernet0/0/2]int e0/0/1
[SW2-Ethernet0/0/1]port link-type trunk 

[SW2-Ethernet0/0/1]port trunk allow-pass vlan 2 3
 

3.SW3：

[SW3]int e0/0/1
[SW3-Ethernet0/0/1]port link-type trunk 
[SW3-Ethernet0/0/1]port trunk allow-pass vlan 2 3

三、配置路由器子接口

[R1]int g0/0/0.2
[R1-GigabitEthernet0/0/0.2]ip address 192.168.1.254 24
[R1-GigabitEthernet0/0/0.2]dotlq termination vid 2 
 [R1-GigabitEthernet0/0/0.2]arp broadcast enable

[R1]int g0/0/0.3
[R1-GigabitEthernet0/0/0.3]ip address 192.168.2.254 24 
[R1-GigabitEthernet0/0/0.3]dotlq termination vid 3
[R1-GigabitEthernet0/0/0.3]arp broadcast enable

[R1]int g0/0/1.2
[R1-GigabitEthernet0/0/1.2]ip address 192.168.3.254 24
[R1-GigabitEthernet0/0/1.2]dotlq termination vid 2
[R1-GigabitEthernet0/0/1.2]arp broadcast enable 

[R1]int g0/0/1.3
[R1-GigabitEthernet0/0/1.3]ip address 192.168.4.254 24
[R1-GigabitEthernet0/0/1.3]dotlq termination vid 3

[R1-GigabitEthernet0/0/1.3]arp broadcast enable

四、配置DHCP服务

[R1]ip pool aa
[R1-ip-pool-aa]network 192.168.1.0 mask 24
[R1-ip-pool-aa]gateway-list 192.168.1.254
[R1-ip-pool-aa]dns-list 8.8.8.8

五、全局应用

[R1]int g0/0/0.3
[R1-GigabitEthernet0/0/0.3]dhcp select global 

[R1]ip pool cc
[R1-ip-pool-cc]network 192.168.3.0 mask 24
[R1-ip-pool-cc]gateway-list 192.168.3.254
[R1-ip-pool-cc]dns-list 8.8.8.8
[R1-ip-pool-cc]quit

全局应用：
[R1]int g0/0/1.2
[R1-GigabitEthernet0/0/1.2]dhcp select global

[R1]ip pool dd
[R1-ip-pool-dd]network 192.168.4.0 mask 24
[R1-ip-pool-dd]gateway-list  192.168.4.254
[R1-ip-pool-dd]dns-list 8.8.8.8
[R1-ip-pool-dd]quit

全局应用：
[R1]int g0/0/1.3
[R1-GigabitEthernet0/0/1.3]dhcp select global

实验完成