NBR-3000常用命令

一、查看类命令

sh  run---------------查看配置

sh  ip  flow   ip  all----查看内网电脑的使用的总流量情况（包括上行和下行）

sh  ip  flowrate inbound   all----查看内网电脑使用的上行总流量

sh  ip flowrate outbound all----查看内网电脑使用的下行总流量

sh  int  g0/0(f0/0)------------------查看内网口信息

sh  int  g0/1(f1/0)------------------查看外网口信息

sh  log----------------------------------查看日志

sh cpu----------------------------------查看CPU

sh  arp----------------------------------查看路由器学习到的ARP信息

二、限速类命令

游戏优先

ip bandwidth-auto-adjust total-bandwidth inbound 30000 outbound 30000 interface FastEthernet 1/0

ip bandwidth-auto-adjust auto-config interface FastEthernet 1/0

ip bandwidth-auto-adjust base-on-application interface FastEthernet 1/0

ip bandwidth-auto-adjust uptight-percent 60 interface FastEthernet 1/0 application

弹性带宽

ip bandwidth-auto-adjust iprange 192.168.0.1 192.168.0.232 inbound minimum 400 maximum 600 outbound minimum 600 maximum 1000 interface GigabitEthernet 0/1

ip bandwidth-auto-adjust ip 192.168.1.113 inbound minimum 8000 maximum 10000 outbound minimum 10000 maximum 12000 interface GigabitEthernet 0/1

固定限速（全局的）

ip bandwidth-auto-adjust total-bandwidth inbound 25000 outbound 25000 interface GigabitEthernet 0/1

ip rate-limit default inbound 500 outbound 1000 interface GigabitEthernet 1/0

基于ip段的限速

ip rate-limit iprange 192.168.1.4 192.168.1.254 inbound 300 outbound 700 interface GigabitEthernet 0/1

ip bandwidth-auto-adjust iprange 192.168.1.182 192.168.1.183 inbound minimum 400 outbound minimum 600 interface dialer 0

三、功能配置类命令

端口映射

ip nat inside source static tcp 192.168.33.22 80 125.77.116.217 80 permit-inside

ip nat inside source static tcp 192.168.1.251 3389 58.22.4.22 3389 permit-inside