openEuler22.03配置网络桥接模式并设置yum源

最新推荐文章于 2024-07-30 10:44:09 发布

gfc_123456789

最新推荐文章于 2024-07-30 10:44:09 发布

阅读量2.5k

点赞数 1

文章标签：网络桥接模式 linux

本文链接：https://blog.csdn.net/gfc_123456789/article/details/126171597

版权

openEuler22.03配置网络桥接模式并设置yum源

配置网络桥接模式

网上几乎都是NAT模式，此处设置桥接模式，两者模式区别自行搜索

宿主机ip信息

在这里插入图片描述

vim /etc/sysconfig/network-scripts/ifcfg-ens33

编辑ifcfg-ens33

TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=static #修改
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME=ens33
UUID=9a2b1088-e551-46ad-bd47-512f643e9778
DEVICE=ens33
ONBOOT=yes #修改
IPADDR=192.168.1.193 #新加
GATEWAY=192.168.1.1 #新加
NATEWAY=255.255.255.0 #新加
DNS1=192.168.1.1 #新加

退出后 reboot重启，ping www.baidu.com
在这里插入图片描述

yum源（采坑）

主要EPOL5，21.03版本之前都是没有main路径的，否则装ukui会失败，显示没有ukui源。
多次尝试，后来看了下仓库不断点进去才配置成功了
22.03-LTS版本号其他教程都是这样写的baseurl=https://mirrors.aliyun.com/openeuler/openEuler- $re l e a se v er / EPO L /$ basearch/
$releasever出来的22.03LTS也就是少了一个-，也是弄了好久。
EPOL1-4不知道有用没，就全部加上了，反正多了总没坏处，弄不好后面又安装其他源失败

[OS]
name=OS
baseurl=https://repo.huaweicloud.com/openeuler/openEuler-22.03-LTS/OS/$basearch/
enabled=1
gpgcheck=1
gpgkey=https://repo.huaweicloud.com/openeuler/openEuler-22.03-LTS/OS/$basearch/RPM-GPG-KEY-openEuler

[everything]
name=everything
baseurl=https://repo.huaweicloud.com/openeuler/openEuler-22.03-LTS/everything/$basearch/
enabled=1
gpgcheck=1
gpgkey=https://repo.huaweicloud.com/openeuler/openEuler-22.03-LTS/everything/$basearch/RPM-GPG-KEY-openEuler

[EPOL]
name=EPOL
baseurl=https://repo.huaweicloud.com/openeuler/openEuler-22.03-LTS/EPOL/multi_version/OpenStack/Train/$basearch/
enabled=1
gpgcheck=1
gpgkey=https://repo.huaweicloud.com/openeuler/openEuler-22.03-LTS/OS/$basearch/RPM-GPG-KEY-openEuler

[EPOL5]
name=EPOL5
baseurl=https://repo.huaweicloud.com/openeuler/openEuler-22.03-LTS/EPOL/main/$basearch/
enabled=1
gpgcheck=1
gpgkey=https://repo.huaweicloud.com/openeuler/openEuler-22.03-LTS/OS/$basearch/RPM-GPG-KEY-openEuler

[EPOL2]
name=EPOL2
baseurl=https://repo.huaweicloud.com/openeuler/openEuler-22.03-LTS/EPOL/multi_version/OpenStack/Wallaby/$basearch/
enabled=1
gpgcheck=1
gpgkey=https://repo.huaweicloud.com/openeuler/openEuler-22.03-LTS/OS/$basearch/RPM-GPG-KEY-openEuler

[EPOL3]
name=EPOL3
baseurl=https://repo.huaweicloud.com/openeuler/openEuler-22.03-LTS/EPOL/update/multi_version/OpenStack/Train/$basearch/
enabled=1
gpgcheck=1
gpgkey=https://repo.huaweicloud.com/openeuler/openEuler-22.03-LTS/OS/$basearch/RPM-GPG-KEY-openEuler

[EPOL4]
name=EPOL4
baseurl=https://repo.huaweicloud.com/openeuler/openEuler-22.03-LTS/EPOL/update/multi_version/OpenStack/Wallaby/$basearch/
enabled=1
gpgcheck=1
gpgkey=https://repo.huaweicloud.com/openeuler/openEuler-22.03-LTS/OS/$basearch/RPM-GPG-KEY-openEuler

[debuginfo]
name=debuginfo
baseurl=https://repo.huaweicloud.com/openeuler/openEuler-22.03-LTS/debuginfo/$basearch/
enabled=1
gpgcheck=1
gpgkey=https://repo.huaweicloud.com/openeuler/openEuler-22.03-LTS/debuginfo/$basearch/RPM-GPG-KEY-openEuler

[source]
name=source
baseurl=https://repo.huaweicloud.com/openeuler/openEuler-22.03-LTS/source/
enabled=1
gpgcheck=1
gpgkey=https://repo.huaweicloud.com/openeuler/openEuler-22.03-LTS/source/RPM-GPG-KEY-openEuler

[update]
name=update
baseurl=https://repo.huaweicloud.com/openeuler/openEuler-22.03-LTS/update/$basearch/
enabled=1
gpgcheck=1
gpgkey=https://repo.huaweicloud.com/openeuler/openEuler-22.03-LTS/OS/$basearch/RPM-GPG-KEY-openEuler