spi的platform_device

在dev-spi.c中

/* SPI (0) */

static struct resource s3c_spi0_resource[] = {

[0] = {

.start = S3C_PA_SPI0,

.end   = S3C_PA_SPI0 + S3C_SZ_SPI0 - 1,

.flags = IORESOURCE_MEM,

},

[1] = {

.start = IRQ_SPI0,

.end   = IRQ_SPI0,

.flags = IORESOURCE_IRQ,

}

};

static struct s3c_spi_mstr_info sspi0_mstr_info = {

.pdev = NULL,

.clk = NULL,

.prnt_clk = NULL,

.num_slaves = 0,

.spiclck_get = smi_getclcks,

.spiclck_put = smi_putclcks,

.spiclck_en = smi_enclcks,

.spiclck_dis = smi_disclcks,

.spiclck_setrate = smi_setrate,

.spiclck_getrate = smi_getrate,

};

static u64 s3c_device_spi0_dmamask = 0xffffffffUL;

struct platform_device s3c_device_spi0 = {

.name = "s3c-spi",

.id = 0,

.num_resources = ARRAY_SIZE(s3c_spi0_resource),

.resource = s3c_spi0_resource,

.dev = {

.dma_mask = &s3c_device_spi0_dmamask,

.coherent_dma_mask = 0xffffffffUL,

.platform_data = &sspi0_mstr_info,

}

};

EXPORT_SYMBOL(s3c_device_spi0);

/* SPI (1) */

static struct resource s3c_spi1_resource[] = {

[0] = {

.start = S3C_PA_SPI1,

.end   = S3C_PA_SPI1 + S3C_SZ_SPI1 - 1,

.flags = IORESOURCE_MEM,

},

[1] = {

.start = IRQ_SPI1,

.end   = IRQ_SPI1,

.flags = IORESOURCE_IRQ,

}

};

static struct s3c_spi_mstr_info sspi1_mstr_info = {

.pdev = NULL,

.clk = NULL,

.prnt_clk = NULL,

.num_slaves = 0,

.spiclck_get = smi_getclcks,

.spiclck_put = smi_putclcks,

.spiclck_en = smi_enclcks,

.spiclck_dis = smi_disclcks,

.spiclck_setrate = smi_setrate,

.spiclck_getrate = smi_getrate,

};

static u64 s3c_device_spi1_dmamask = 0xffffffffUL;

struct platform_device s3c_device_spi1 = {

.name = "s3c-spi",

.id = 1,

.num_resources = ARRAY_SIZE(s3c_spi1_resource),

.resource = s3c_spi1_resource,

.dev = {

.dma_mask = &s3c_device_spi1_dmamask,

.coherent_dma_mask = 0xffffffffUL,

.platform_data = &sspi1_mstr_info,

}

};

EXPORT_SYMBOL(s3c_device_spi1);

/* SPI (2) */

static struct resource s3c_spi2_resource[] = {

[0] = {

.start = S3C_PA_SPI2,

.end   = S3C_PA_SPI2 + S3C_SZ_SPI2 - 1,

.flags = IORESOURCE_MEM,

},

[1] = {

.start = IRQ_SPI2,

.end   = IRQ_SPI2,

.flags = IORESOURCE_IRQ,

}

};

static struct s3c_spi_mstr_info sspi2_mstr_info = {

.pdev = NULL,

.clk = NULL,

.prnt_clk = NULL,

.num_slaves = 0,

.spiclck_get = smi_getclcks,

.spiclck_put = smi_putclcks,

.spiclck_en = smi_enclcks,

.spiclck_dis = smi_disclcks,

.spiclck_setrate = smi_setrate,

.spiclck_getrate = smi_getrate,

};

static u64 s3c_device_spi2_dmamask = 0xffffffffUL;

struct platform_device s3c_device_spi2 = {

.name = "s3c-spi",

.id = 2,

.num_resources = ARRAY_SIZE(s3c_spi2_resource),

.resource = s3c_spi2_resource,

.dev = {

.dma_mask = &s3c_device_spi2_dmamask,

.coherent_dma_mask = 0xffffffffUL,

.platform_data = &sspi2_mstr_info,

}

};

EXPORT_SYMBOL(s3c_device_spi2);

void __init s3cspi_set_slaves(unsigned id, int n, struct s3c_spi_pdata const *dat)

{

struct s3c_spi_mstr_info *pinfo;

if(id == 0)

  pinfo = (struct s3c_spi_mstr_info *)s3c_device_spi0.dev.platform_data;

else if(id == 1)

  pinfo = (struct s3c_spi_mstr_info *)s3c_device_spi1.dev.platform_data;

else if(id == 2)

  pinfo = (struct s3c_spi_mstr_info *)s3c_device_spi2.dev.platform_data;

else

  return;

pinfo->spd = kmalloc(n * sizeof (*dat), GFP_KERNEL);

if(!pinfo->spd)

  return;

memcpy(pinfo->spd, dat, n * sizeof(*dat));

pinfo->num_slaves = n;

}

在板初始化中调用：/mach-smdkv210.c

static void __init smdkv210_machine_init(void)

{

.......

#if defined(CONFIG_SPI_CNTRLR_0)

        s3cspi_set_slaves(BUSNUM(0), ARRAY_SIZE(s3c_slv_pdata_0), s3c_slv_pdata_0);

#endif

#if defined(CONFIG_SPI_CNTRLR_1)

        s3cspi_set_slaves(BUSNUM(1), ARRAY_SIZE(s3c_slv_pdata_1), s3c_slv_pdata_1);

#endif

        spi_register_board_info(s3c_spi_devs, ARRAY_SIZE( s3c_spi_devs));

..........

}

#if defined(CONFIG_SPI_CNTRLR_0)

static struct s3c_spi_pdata s3c_slv_pdata_0[] __initdata = {

        [0] = { /* Slave-0 */

                .cs_level     = CS_FLOAT,

                .cs_pin       = S5PV210_GPB(1),

                .cs_mode   = S5PV210_GPB_OUTPUT(1),

                .cs_set       = s3c_cs_set,

                .cs_config  = s3c_cs_config,

                .cs_suspend   = s3c_cs_suspend,

                .cs_resume    = s3c_cs_resume,

        },

};

#endif

#if defined(CONFIG_SPI_CNTRLR_1)

static struct s3c_spi_pdata s3c_slv_pdata_1[] __initdata = {

        [0] = { /* Slave-0 */

                .cs_level     = CS_FLOAT,

                .cs_pin       = S5PV210_GPB(5),

                .cs_mode      = S5PV210_GPB_OUTPUT(5),

                .cs_set       = s3c_cs_set,

                .cs_config    = s3c_cs_config,

                .cs_suspend   = s3c_cs_suspend,

                .cs_resume    = s3c_cs_resume,

        },

};

#endif

static struct spi_board_info s3c_spi_devs[] __initdata = {

#if defined(CONFIG_SPI_CNTRLR_0)

        [0] = {

                .modalias         = "spidev", /* Test Interface */

                .mode             = SPI_MODE_0,  /* CPOL=0, CPHA=0 */

                .max_speed_hz = 100000,

                /* Connected to SPI-0 as 1st Slave */

                .bus_num         = 0,

                .irq             = IRQ_SPI0,

                .chip_select     = 0,

        },

#endif

#if defined(CONFIG_SPI_CNTRLR_1)

        [1] = {

                .modalias         = "spidev", /* Test Interface */

                .mode             = SPI_MODE_0,  /* CPOL=0, CPHA=0 */

                .max_speed_hz  = 100000,

                /* Connected to SPI-1 as 1st Slave */

                .bus_num         = 1,

                .irq             = IRQ_SPI1,

                .chip_select     = 0,

        },

#endif

};