解决Guidline muste specify type方案

创建CDialog时提示

d:\rim2\rim2\src\other\MideFreqDF1\MidFreqDF.rc

Guideline must specify type

点击“OK”或者“Edit Code”时，提示：

Error in default.htm PopulateUnusedDialogIDs():

Cannot access resource information.Check if the .rc file is opened in another editor.

具体如下图：

出现这个问题有两个原因：

（1）

I found out that if there is a dialog that was created before but the ID of the dialog was changed manually in the .rc file, then the dialog definition in the .rc file causes the corruption. So, I looked through the previous working version of the .rc file and found the dialog ID which is no longer defined in the resource.h file and removed it from the .rc file.

（2）

I also found that the GUIDELINES DESIGNINFO section for a dialog can be empty i.e. it is ok to have a dialog definition without any Margin information at all. The unknown dialog definition in this GUIDELINES DESIGNINFO block will cause VS2010 to produce the entry ",50" which will make other dialogs to come up with an additional dotted box or with a purple background.

具体情形如下图： 

修改方法：将图左改成图右边形式后，就不再出现冲突问题，可以成功创建CDialog类。