自定义博客皮肤VIP专享

*博客头图:

格式为PNG、JPG,宽度*高度大于1920*100像素,不超过2MB,主视觉建议放在右侧,请参照线上博客头图

请上传大于1920*100像素的图片!

博客底图:

图片格式为PNG、JPG,不超过1MB,可上下左右平铺至整个背景

栏目图:

图片格式为PNG、JPG,图片宽度*高度为300*38像素,不超过0.5MB

主标题颜色:

RGB颜色,例如:#AFAFAF

Hover:

RGB颜色,例如:#AFAFAF

副标题颜色:

RGB颜色,例如:#AFAFAF

自定义博客皮肤

-+
  • 博客(0)
  • 资源 (7)
  • 收藏
  • 关注

空空如也

FANUC LADDER-III V8.9升级包.rar

FANUC LADDER-III V8.9最新升级包

2020-12-26

SERVO GUIDE V10.4.zip

fanuc最新伺服调整软件

2020-12-26

数控机床维修培训系列教材

数控机床维修培训系列教材,fanuc公司主讲,系统讲述数控机床维修

2011-11-20

机床维修案例

讲述机床维修案例,图文并茂,实用工具指导书

2011-11-20

FANUC系统宏指令编程

FANUC系统宏指令编程教程,学宏指令编程的可以下载学学

2011-01-21

恒压供水程序和图纸.rar

本程序和控制方案特点如下: 1):泵数量选择,只要在停机状态下在触摸屏上输入泵的数量,就可自动切换为一控二/一控三/一控四 2):轮询均衡启动,每次停泵后下次再启动,会自动切换到下一个泵先启动。 3):远程压力表/4-20mA压力变送器都可以使用,在触摸屏上面切换对应的传感器类型即可。 4):压力传感器量程,可以在触摸屏上面任意设置。 5):超高压力/超低压力保护,可以在触摸屏上任意设置。 6):选择哪个泵运行,想选择择哪个泵投入,哪个泵不投入不参与启动,可以在触摸屏上任意设置。 7):休眠最低频率和休眠最低压力判断时间,都可以在触摸屏上任意设置。 8):如果不想要休眠功能,通过PLC第7个输入点接通还是不接通来切换。 9):如果泵故障了,对应的热保护继电器导通,会自动切入其他好的水泵取代它, 10):如果变频器故障了,会自动切入工频启动泵。 11):加泵减泵的频率/压力/延时时间,都可以在触摸屏上任意设置。 12):故障记录,可以在触摸屏上查询到设备所有发生的故障记录和故障发生的时间。 12):分为变频恒压供水,变频循环排水程序两种不同的应用和程序。 梯形图程序包,里面有plc,一控二/一控三/一控四的PLC梯形图程序跟接线图,有注释和IO分配表,提供PLC和触摸屏编程软件,自己下载

2019-10-01

程序传输软件V13.0

最新版FANUC程序传输软件V13.0,支持fanuc 0i-MF系统, ************************************************************************** ** ** ** FANUC Program Transfer Tool (A08B-9510-J515) Edition 13.0 ** ** ** ** Copyright(c) 2007-2017 FANUC CORPORATION All rights reserved. ** ** ** ************************************************************************** This document provides the information about "FANUC Program Transfer Tool". Please read the following information before using the software. If the contents of this file are different from the manual(B-64344EN) then use the information of this file. -------------------------------------------------------------------------- [1] Environment [2] Installation [3] Update history -------------------------------------------------------------------------- ========================================================================== [1] Environment ========================================================================== 1.1. Supported OS Program Transfer Tool supports the following OS. - Windows 10 Pro (32/64bit OS) - Windows 8 Pro (32/64bit OS) - Windows 7 Professional SP1 (32/64bit OS) - Windows Vista Business SP2 (32bit OS) - Windows XP Professional SP3 (32bit OS) Display : 1024x768 or higher resolution Vacant capacity of hard disk : 30Mbytes or more 1.2. Program Transfer Tool can be used with the following CNC: - Series 30i/31i/32i-MODEL A/B - Series 35i-MODEL B - Power Motion i-A - Series 0i-MODEL B/C/D/F - Series 16i/18i/21i-MODEL A/B - Series 20i-MODEL B - Power Mate i-MODEL D/H The Ethernet or Data Server function is required to CNC. The PCMCIA LAN card is not supported. ========================================================================== [2] Installation ========================================================================== 2.1. Procedure of installation - The administrator privilege is required to installing. - Silent installation is not supported. (1) Set CD-ROM in CD-ROM drive. (2) The installer will be started automatically. Follow the instructions which are displayed in PC. 2.2 Serial No. After the installing, the serial number is required on the setting dialog. The serial number paper is included in the CD-ROM case. 2.3 Procedure of update - It is possible to update from old specification, A08B-9510-J513 or A08B-9510-J514, to the new specification, A08B-9510-J515. - The following updating procedure is different: (a) Version 1.0 -> Version 2.0 (b) Version 2.0 -> Version 3.0 or later Please refer to the manual for the detail. ============================================================================== [3] Update history ============================================================================== Version 13.0 (Sep.,2017) - Read / write of CNC memory card has been speeded up. - When Windows Vista or later is used, if communication with the CNC is not performed for a certain period of time, the communication will be terminated. After that, when you operate the screen, an error message is displayed. When the communication is lost, reconnection is done so that an error message is not displayed. Version 12.0 (Mar.,2017) - Memory card of CNC is supported. Version 11.0 It is a missing number. Version 10.0 (Nov.,2014) - Series 0i-MODEL F has been supported. Version 9.0 (June,2014) - License and specification has been changed. License The single computer license has been changed to the site license. Please refer to the "LICENSE AGREEMENT" for details. New specification A08B-9510-J515 Old specifications are abolished. A08B-9510-J513 A08B-9510-J514 Version 8.0 (Aug.,2011) - Power Motion i-A has been supported. - Windows 8 Pro(32bit/64bit OS) has been supported. Version 7.0 (Feb.,2011) - Windows 7 Professional(64bit OS) has been supported. Version 6.0 (Oct.,2010) - Series 30i/31i/32i-MODEL B, Series 35i-MODEL B has been supported. Version 5.1 (May,2010) - The following error may be occurred at downloading. "Retry because the buffer is full." This problem is corrected. Version 5.0 (Apr.,2010) - Windows 7 Professional(32bit OS) has been supported. Version 4.0 (Sep.,2008) - Transferring tool management data of Series 30i/31i/32i-MODEL A has been supported. Version 3.0 (May.,2008) - Series 0i-MODEL D has been supported. - Simplified Chinese has been supported. Version 2.0 (Dec.26,2007) - Windows Vista Business(32bit OS) has been supported. - Upgrade CD is added. Version 1.0 (Oct.03,2007) - New creation ** Microsoft, Windows, Windows 2000, Windows XP, Windows Vista, Windows 7, Windows 8 are trademarks or registered trademarks of Microsoft Corporation. ** Other product names mentioned are trademarks or registered trademarks of their respective companies.

2018-11-11

空空如也

空空如也

TA创建的收藏夹 TA关注的收藏夹

TA关注的人 TA的粉丝

提示
确定要删除当前文章?
取消 删除