使用linux通过com口配置安装
+-----[configuration]------+
| Filenames and paths |
| File transfer protocols |
| Serial port setup |
| Modem and dialing |
| Screen and keyboard |
| Save setup as dfl |
| Save setup as.. |
| Exit |
| Exit from Minicom |
+--------------------------+
+-----------------------------------------------------------------------+
| A - Serial Device : /dev/ttyS0 |
| B - Lockfile Location : /var/lock |
| C - Callin Program : |
| D - Callout Program : |
| E - Bps/Par/Bits : 9600 8N1 |
| F - Hardware Flow Control : No |
| G - Software Flow Control : No |
| |
| Change which setting? |
+-----------------[Screen and keyboard]-----------------+
| |
| A - Command key is : |
| B - Backspace key sends : |
| C - Status line is : enabled |
| D - Alarm sound : Yes |
| E - Foreground Color (menu): WHITE |
| F - Background Color (menu): BLACK |
+-| G - Foreground Color (term): WHITE |
| | H - Background Color (term): BLACK |
| | I - Foreground Color (stat): WHITE |
| | J - Background Color (stat): BLACK |
| | K - History Buffer Size : 2000 |
| | L - Macros file : .macros |
| | M - Edit Macros |
| | N - Macros enabled : Yes |
| | O - Character conversion : |
| | P - Add linefeed : No |
+-| Q - Local echo : No |
| Change which setting? (Esc to exit) |
+-------------------------------------------------------+
Press CTRL-A Z for help on special keys
+-------------------------------------------------------------------+
| Minicom Command Summary |
| |
| Commands can be called by CTRL-A |
| |
| Main Functions Other Functions |
| |
| Dialing directory..D run script (Go)....G | Clear Screen.......C |
| Send files.........S Receive files......R | cOnfigure Minicom..O |
| comm Parameters....P Add linefeed.......A | Suspend minicom....J |
| Capture on/off.....L Hangup.............H | eXit and reset.....X |
| send break.........F initialize Modem...M | Quit with no reset.Q |
| Terminal settings..T run Kermit.........K | Cursor key mode....I |
| lineWrap on/off....W local Echo on/off..E | Help screen........Z |
| Paste file.........Y | scroll Back........B |
| |
| Select function or press Enter for none. |
| |
| Written by Miquel van Smoorenburg 1991-1995 |
| Some additions by Jukka Lahtinen 1997-2000 |
| i18n by Arnaldo Carvalho de Melo 1998 |
+-------------------------------------------------------------------+
Please wait........................................... Done.
Please wait........................................... Done.
Please wait........................................... Done.
Please wait........................................... Done.
Please wait........................................... Done.
Configuring GigabitEthernet1/0/13........................................... D.
Configuring GigabitEthernet1/0/14........................................... D.
Configuring GigabitEthernet1/0/15........................................... D.
Configuring GigabitEthernet1/0/16........................................... D.
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Bridge-Aggregation1 current state: DOWN
IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 000f-e207-f2e0
Description: Bridge-Aggregation1 Interface
Unknown-speed mode, unknown-duplex mode
Link speed type is autonegotiation, link duplex type is autonegotiation
PVID: 1
Port link-type: trunk
VLAN passing : 1(default vlan)
VLAN permitted: 1(default vlan), 2-4094
Trunk port encapsulation: IEEE 802.1q
[H3C]display link-aggregation summary
windows可以通过超级终端或者crt等配置com口来连接到交换机,同样linux也是可以,linxu下使用minicom进行com口连接
1. 安装minicom,略过,随便下载或者光盘里拷出一个rpm包安装即可;
2. 配置:安装完成后使用命令minicom -s来进行配置
显示文字窗口如下:
1)用上下键选择Serial port setup进行配置,大致如下:
备注:按对应的字母进可以进行该项的配置,如按A配置 Serial Device ;esc为取消与退出,enter为确定
2) Screen and keyboard的配置,大致如下:
删除A B K后的提示符
3) 选择Save setup as dfl保存默认的配置文件
4) Exit from Minicom返回命令行
之后直接输入minicom进能进到minicom的界面如下
Welcome to minicom 2.3
OPTIONS: I18n
Compiled on Aug 19 2010, 05:50:19.
Port /dev/ttyS0
minicom上操作都是要先按ctrl-A后再按操作键才可以。之前就卡在这里,不知道怎么进入交换机中
其实只要先按CTRL+A在按ENTER键即可;
另外可以查看帮助CTRL-A Z,还有一些相关的命令如下:
进入到交换机后,端口汇聚的配置大致如下(交换机为H3C S5120-24P-EI)
system-view
[H3C]interface Bridge-Aggregation1
[H3C]interface GigabitEthernet1/0/13
[H3C-GigabitEthernet1/0/13]port link-type trunk
[H3C-GigabitEthernet1/0/13]port trunk permit vlan all
[H3C-GigabitEthernet1/0/13]port link-aggregation group 1
[H3C]interface GigabitEthernet1/0/14
[H3C-GigabitEthernet1/0/14]port link-type trunk
[H3C-GigabitEthernet1/0/14]port trunk permit vlan all
[H3C-GigabitEthernet1/0/14]port link-aggregation group 1
[H3C]interface GigabitEthernet1/0/15
[H3C-GigabitEthernet1/0/15]port link-type trunk
[H3C-GigabitEthernet1/0/15]port trunk permit vlan all
[H3C-GigabitEthernet1/0/15]port link-aggregation group 1
[H3C]interface GigabitEthernet1/0/16
[H3C-GigabitEthernet1/0/16]port link-type trunk
[H3C-GigabitEthernet1/0/16]port trunk permit vlan all
[H3C-GigabitEthernet1/0/16]port link-aggregation group 1
[H3C]interface Bridge-Aggregation1
[H3C-Bridge-Aggregation1]port link-type trunk
[H3C-Bridge-Aggregation1]port trunk permit vlan all
[H3C]display link-aggregation member-port
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
GigabitEthernet1/0/13:
Aggregation Interface: Bridge-Aggregation1
Port Number: 13
Oper-Key: 1
GigabitEthernet1/0/14:
Aggregation Interface: Bridge-Aggregation1
Port Number: 14
Oper-Key: 1
GigabitEthernet1/0/15:
Aggregation Interface: Bridge-Aggregation1
Port Number: 15
Oper-Key: 1
GigabitEthernet1/0/16:
Aggregation Interface: Bridge-Aggregation1
Port Number: 16
Oper-Key: 1
[H3C]display interface Bridge-Aggregation1
Aggregation Interface Type:
BAGG -- Bridge-Aggregation, RAGG -- Route-Aggregation
Aggregation Mode: S -- Static, D -- Dynamic
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Actor System ID: 0x8000, 0cda-4148-78c9
AGG AGG Partner ID Select Unselect Share
Interface Mode Ports Ports Type
-------------------------------------------------------------------------------
BAGG1 S none 0 4 Shar