今天为了查看oracle 10g RAC能否在linux red hat5.7上面安装，看了以下文档，记录一下：
Oracle Database (RDBMS) on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Jump to:
HP-UX (PA-RISC and Itanium)
Linux x86
Linux x86-64
Linux Itanium
Linux on Power
Linux on zSeries
Mac OS X (PowerPC and x86-64)
Oracle Solaris (SPARC and x86-64)
Tru64
Pre-Installation Scripts
OPatch
Related Documents
OS Specific Commands
Change History
Note 43208.1 Certified Compilers
Browse The Contents of Linux Brands ISOs
PURPOSE
--------------
This bulletin is produced to provide a central source for all the primary installation settings for the various mainstream unix platforms, e.g. IBM AIX, HP-UX, Oracle Solaris, Tru64, and Linux.
Careful comparison of the Installation Guide and the applicable release note for an OS/Oracle version has been done to ensure that this bulletin provides the most complete source of data in hopes that it will save time for each researching analyst.
Keeping the OS kernel current helps stabilize the system. Production systems should never run an out dated OS kernel version. As a best practice, Oracle recommends the OS kernel version be maintained to within 6 months of current. Please contact the OS vendor directly for more information, risk exposure, and patching recommendations.
NOTE: Pre-compilers requirements are no longer addressed in this note, for a single source note
that addresses Pre-compiler/Compiler requirements, please refer to:
Note 43208.1 Certified Compilers
SCOPE & APPLICATION
-------------------------------------
This focus of this bulletin is on assisting the Oracle Unix installation community in resolving installation issues of the RDBMS.
This bulletin places in one document all the pertinent information related to installations that has been extracted from three different documents (Installation Guides, Release Notes, and SRNs)
DISCLAIMER
------------
Whenever a contradiction arises between this document and My Oracle Support (MOS)-Certification, My Oracle Support (MOS)-Certification is the Certification authority.
Users of this bulletin are obligated to provide real-time corrections/updates in the form of My Oracle Support (MOS) "Feedback" submissions to ensure the accuracy and up-to-date status of this bulletin.
PRE-INSTALLATION SCRIPTS
-------------------------------------
A decommissioned, non-supported script is still available to verify that the system has been configured correctly according to the 8.0.5 through 9.2 Installation Guides, please refer to the following My Oracle Support (MOS) Note for details:
Note 189256.1 "UNIX: Script to Verify Installation Requirements for Oracle 8.0.5 to 9.2 versions of RDBMS"
The Remote Diagnostic Agent RDA (see Note 314422.1 for more info on RDA) has the capability to run a Pre-Installation check on several 10.1 and 10.2 Unix/Linux Platforms.
Please refer to Note 250262.1 for specifics on how to run these Pre-Install scripts on your server.
OPatch FAQ
-------------------------------------
To apply one-off patches and Critical Patch Updates (CPUs) or Patch Set Update (PSU) on 9.2 and higer RDBMS versions you have to use the patching utility, OPatch.
Oracle Support requests you always use the latest version before applying any patches to your server, to get the latest version,
For 9.2 and 10.1 download Patch 6880880
For 10.2, 11.1 & 11.2 download Patch 6880880
Master Note For OPatch Note 293369.1
| Oracle Version | 11.2 | 11.1 | 10.2 | 10.1 | 9.2.0 | 9.0.1 | 8.1.7 | 8.1.6 | 8.1.5 | 8.0.6 | 8.0.5 | |
| AIX OS (32- and 64-bit stands for Oracle not OS) | AIX 5L V5.3 TL 09 SP1 ("5300-09-01") or higher, 64 bit kernel (Part Number E10854-01) AIX 6.1 TL 02 SP1 ("6100-02-01") or higher, 64-bit kernel AIX 7.1 TL 00 SP1 ("7100-00-01") or higher, 64-bit kernel | AIX 6.1L, AIX 5L version 5.3, TL 05, Service Pack 06 (Part Number B32076-03), AIX 6L version 6.1, TL 00, Service Pack 04 or later (Part Number B32076-03) | 5.2 ML4 or higher, 5.3 ML2 or higher, 6.1 For AIX 6.1, only 10.2.0.3 or higher are certified Customers running on 10.2.0.4 or higher and using CRS require AIX 5.3 TL5 (5300-05) or higher -- see Note:739371.1 | 5.2 ML1 or higher, 5.3 | o 4.3.3 (64bit only) o 5.1, 5.2, 5.3 (5L)(64bit only) | 4.3.3 (64bit) | o 4.3.2, 4.3.3 (32bit) o 5.1, 5.2 (5L) (32bit) [patch 2896876 is required if kernel is running in 64bit mode] o 4.3.2, 4.3.3 (64bit) | 4.3.2, 4.3.3 (32 or 64bit) | o 4.2.1 , 4.3.0, 4.3.1, 4.3.2, 4.3.3 (32bit) o 4.3.2, 4.3.3 (64bit) | o 4.2.1, 4.3.2, 4.3.3 (32bit) o 4.3.2, 4.3.3 (64bit) | o 4.1.4, 4.1.5, 4.2.1, 4.3.2, 4.3.3 (32bit) o 4.3.2, 4.3.3 (64bit) | |
| AIX Disk Space | 6.40G Database 1.55G Software | 6.45G Database 1.6G Software | 1.2G Database 3G Software 1G Companion 150M-1.9G Client | 1.2G Database 3G Software 1G Companion 150M-1.9G Client | 4.5G | 4.7G | 1.58G | 800Mb | 800Mb | 700Mb | 700Mb | |
| AIX RAM | Database: minimum 1GB, recommended 2GB Grid Infrastructure for standalone server: minimum 1.5GB (plus another 1GB if installing Database too), recommended 4GB | 1GB | 1GB | 512Mb 256Mb(Client/Compan) | 512Mb | 512Mb | 256Mb | 128Mb | 128Mb | 64Mb or 128Mb / ConText | 32Mb or 128Mb / ConText | |
| AIX swap | Between 1GB and 2GB then 1.5 times RAM Between 2GB and 16 GB then match RAM More than 16 GB then 16GB RAM | If RAM = 1024MB to 2048Mb then 1.5 times RAM elseif RAM > 2048MB and < 8192MB then match RAM else RAM > 8192MB then .75 times RAM | If RAM = 1024MB to 2048Mb then 1.5 times RAM elseif RAM > 2048MB and < 8192MB then match RAM else RAM > 8192MB then .75 times RAM | 1Gb or match RAM 512Mb(Client/Compan) | 1Gb or match RAM | 400Mb | 400Mb | 400Mb | 256Mb | 2*RAM | 2*RAM | |
| AIX tmp | 1GB | 240Mb | 400Mb | 400Mb | 400Mb | 400Mb | 400Mb | 400Mb | 50Mb | 20Mb | 20Mb | |
| AIX JDK & JRE | IBM JDK 1.6.0.00 (64 BIT) | IBM JDK 1.5.0.06 (IA64 - mixed mode) is installed | IBM JDK 1.4.2 (32bit) is installed | IBM JDK 1.4.1.2 (32bit) is installed | JDK 1.3.1-build 20020316 & 1.1.8-Build 20020313 | JDK 1.2.2.04 or JDK 1.2.2 & 1.1.8 | JDK 1.1.8 / 1.2.2 & 1.1.8.3 | 1.1.8.3 | ? | n/a | n/a | |
| AIX Patches/ Packages versions in parens mean if OS is later than the listed version, the APAR is built into the later OS version and need not be applied. IMPORTANT: Review Note 390656.1 & apply AIX & Oracle Patch | AIX 5.3 required packages: bos.adt.base bos.adt.lib bos.adt.libm bos.perf.libperfstat 5.3.9.0 or later bos.perf.perfstat bos.perf.proctools rsct.basic.rte (For RAC configurations only) rsct.compat.clients.rte (For RAC configurations only) xlC.aix50.rte:10.1.0.0 or later gpfs.base 3.2.1.8 or later (Only for RAC systems that will use GPFS cluster filesystems) AIX 6.1 required packages: AIX 7.1 required packages: Authorized Problem Analysis Reports (APARs) for AIX 5.3: APARs for AIX 6.1: APARs for AIX 7.1: Refer to the 11.2 AIX Install Guide.Part Number E24332-01 | 6.1 / 5.3 ML5 required packages: bos.adt.base bos.adt.lib bos.adt.libm bos.perf.libperfstat bos.perf.perfstat bos.perf.proctools xlC.aix50.rte:8.0.0.7 or later (AIX 5.3) xlC.rte:8.0.0.7 or later (AIX 5.3) xlC.aix61.rte:9.0.0.1 or later (AIX 6.1) xlC.rte:9.0.0.1 or later (AIX 6.1) rsct.basic.rte (For RAC configurations only) rsct.compat.clients.rte (For RAC configurations only) 5.3 ML5 required patches: | 5.2 ML4 required patches: IY63133 IY64978 IY63366 IY64691 IY64737 IY65001 IY94343 Note 422031.1 LV Block Corruption 5.3 ML2 required patches: Important: Please see Note 282036.1 for the latest patching requirements for 5.3 and 5.2 Required OS packages: 6.1 specifics: | 5.2 required patches: IY43980 IY44810 IY45462 IY45707 IY46214 IY46605 IY48525 IY51801 IY59082 Refer to Note 285158.1 IY94343 Note 422031.1 LV Block Corruption 5.3 required patches: Refer to Note 282036.1 Important: Please see Note 282036.1 for the latest patching requirements for 5.3 and 5.2 Required OS packages: | Async IO Hang, refer to Note 233659.1 for applicable patch for 4.3.3, 5.1, or 5.2 4.3.3 required patches/packages: bos.adt.base 5.1(5L) required patches/packages: bos.adt.base | Maint Level 7 or higher (4.3.3.0.07) bos.adt.base | IY01050 (4.3.3.0.03) IY07276 (4.3.3.0.02) IY05995 (4.3.3.01) IY02407 (4.3.2.02) IX89087 (4.3.2.0.02) IY03412 (4.3.2.0.02) IX85104 (4.3.2.0.01) IX87313 (4.3.2.0.01) IX87382 (4.3.2.0.01) IX89552 (4.3.2.0.01) IX81863 (4.3.1) IX72696 (4.3.0) | IY01050 (4.3.3.0.03) IY07276 (4.3.3.0.02) IY05995 (4.3.3.01) IY07018 (4.3.3) IY02407 (4.3.2.02) IX89087 (4.3.2.0.02) IY03412 (4.3.2.0.02) IX85104 (4.3.2.0.01) IX87313 (4.3.2.0.01) IX87382 (4.3.2.0.01) IX89552 (4.3.2.0.01) IX81863 (4.3.1) IX72696 (4.3.0) | 4.2 related required APARs IX62429 (4.2.0) IX67174 (4.2.0) IX67978 (4.2.1) IX68932 (4.2.1) IX70737 (4.2.1) IX78933 (4.2.1.0.03) IX81957 (4.2.1.0.03) IX86229 (4.2.1.0.05) 4.3 related required APARs | bos.adt.base, bos.adt.libm must be installed 4.2 related required APARs 4.3 related required APARs | bos.adt.base, bos.adt.libm must be installed 4.1 related required APARs 4.2 related required APARs 4.3 related required APARs | |
| AIX Kernel Settings | set AIXTHREAD_SCOPE=S in the environment: export AIXTHREAD_SCOPE=S NOTE: This is only necessary on AIX5L. A change was introduced in AIX 6.1 which means that the variable does not need to be set. See section 5.5 (page 217) of theIBM AIX Version 6.1 Differences Guide From Section 2.5 of the 11.2 Install Guide for AIX: From Section 2.8.2 of the 11.2 Install Guide for AIX: Also see Note:1307804.1 | set AIXTHREAD_SCOPE=S in the environment: export AIXTHREAD_SCOPE=S NOTE: This is only necessary on AIX5L. A change was introduced in AIX 6.1 which means that the variable does not need to be set. See section 5.5 (page 217) of theIBM AIX Version 6.1 Differences Guide | set AIXTHREAD_SCOPE=S in the environment: export AIXTHREAD_SCOPE=S NOTE: This is only necessary on AIX5L. A change was introduced in AIX 6.1 which means that the variable does not need to be set. See section 5.5 (page 217) of the IBM AIX Version 6.1 Differences Guide | set AIXTHREAD_SCOPE=S in the environment: export AIXTHREAD_SCOPE=S | set AIXTHREAD_SCOPE=S in the environment: export AIXTHREAD_SCOPE=S | N/A | N/A | N/A | LINK_CNTRL = L_PTHREADS_D7 (if using 4.3) | LINK_CNTRL = L_PTHREADS_D7 (if using 4.3) | LINK_CNTRL = L_PTHREADS_D7 (if using 4.3) | |
| Oracle Version | 11.2 | 11.1 | 10.2 | 10.1 | 9.2.0 | 9.0.1 | 8.1.7 | 8.1.6 | 8.1.5 | 8.0.6 | 8.0.5 | |
| HP OS (32- and 64-bit stands for Oracle not OS) | HP-UX 11i V3 patch Bundle Sep/ 2008 (B.11.31.0809.326a) or higher (Part Number E10851-01) | 11.23 and 11.31 (Itanium,PA-RISC) | 11.11 (PA-RISC) (64bit) 11.23 (PA-RISC) (64bit) 11.23, 11.31 (PA-RISC / Itanium / IPF) | 11.11 (PA-RISC) (64bit) 11.23 (PA-RISC) (64bit) 11.23, 11.31 (IA64 - Itanium) Note: for all Itanium systems using "Montecito" processors, refer tonote:400227.1 for special installation instructions | 11.0 (64bit) 11.11 (64bit) 11.23 (PA-RISC) (64bit) 11.31 (PA-RISC) (64bit)(10/30) 11.22, 11.23, 11.31 (IA64 - Itanium) Note: for all Itanium systems using "Montecito" processors, refer tonote:400227.1 for special installation instructions | 11.0 (64bit) 11.11 (64bit) | 11.0, 11.11(11i) (32bit/64bit) | 11.0, 11.11(11i) (32bit/64bit) | 11.0, 11.11(11i) (32bit/64bit) | 10.20 (32bit) 11.0, 11.11(11i) (32bit/64bit) | 10.20 (32bit) 11.0 (32 or 64) | |
| HP Disk Space | 1.7G database 6.9 G Software | 1.7G Database 6.9G Software | 1.2G Database 2.5G Software 1G Companion 150M-1.5G Client | 1.2G Database 2.5G Software 1G Companion 150M-1.5G Client | 4.5G | 3.5G | 1.5G | 910Mb | 900Mb | 900Mb | 900Mb | |
| HP RAM | Database: minimum 1GB, recommended 2GB Grid Infrastructure for standalone server: minimum 1.5GB (plus another 1GB if installing Database too), recommended 4GB | 1GB | 1GB | 512Mb 256Mb(Client/Compan) | 512Mb | 256Mb | 256Mb | 128Mb | 128Mb | 64Mb or 128Mb / ConText | 32Mb or 128Mb / ConText | |
| HP swap | Between 4 GB and 8 GB then 2 times RAM. Between 8 GB and 32 GB then 1.5 times RAM. More than 32 GB then 32 GB RAM. | If RAM = 1GB to 2GB then 1.5 times RAM elseif RAM > 2GB and < 8GB then match RAM else RAM > 8GB then .75 times RAM | If RAM = 1024MB to 2048Mb then 1.5 times RAM elseif RAM > 2048MB and < 8192MB then match RAM else RAM > 8192MB then .75 times RAM | 1Gb or match RAM 512Mb(Client/Compan) | 1Gb or match RAM | 2*RAM | 2*RAM | 2*RAM | 3*RAM | 3*RAM | 3*RAM | |
| HP tmp | 1GB | 400Mb | 400Mb | 400Mb | 400Mb | 400Mb | 75Mb | ? | 75Mb | 50Mb | 50Mb | |
| HP jdk & JRE | HPUX JDK 6.0.05, HPUX JDK 5.0.15 NOTE: The JDK version included with 11.2.0.3 on HP-UX Itanium (1.5.0.23) is not compatible with Itanium 2 model 9310 processors. Please refer to the statement at the end of bothNote:404843.1 and Note:552358.1. To workaround the issue, download JDK 1.5.0.24 or higher and use the "./runInstaller -jreLoc ..." syntax to start the 11.2.0.3 installation. | Java 1.5.0.0.6 is installed | Java SDK 1.4.2.00 is installed | Java SDK 1.4.2.00 is installed | JDK 1.3.1.02 | JDK 1.2.2.07 & 1.1.8 | JDK 1.2.2 & 1.1.8.03 | 1.1.8.10 | 1.1.7 | n/a | n/a | |
| HP Patches/ Packages "s/b" indicates superseded by See Note 43507.1for other applicable patches. | For HP-UX 11i V3 (11.31): | For HP-UX PA-RISC and Itanium 11.23 (Mar '07 Patch bundle for HP-UX 11iV2- B.11.23.0703): For HP-UX PA-RISC and Itanium 11.31: Use the -ignoreSysPrereqs option with runInstaller to ignore the system pre-requisite test Refer to the following Web site for information about additional java patches:http://www.hp.com/products1/unix/java/patches/index.htmlThe default 64bit OS (PA-RISC and | Per HP Bug (Doc ID: KBRC00003627) NOTE: This bug is not applicable to 11.23 The default 64bit OS (PA-RISC and Itanium) installation does not create a few required X library symbolic links. The following symbolic links need to be created: (NOTE: This task is required only if the Motif 2.1 Development Environment Package ( X11MotifDevKit.MOTIF21-PRG ) is not installed ). cd /usr/lib ln -s /usr/lib/libX11.3 libX11.sl ln -s /usr/lib/libXIE.2 libXIE.sl ln -s /usr/lib/libXext.3 libXext.sl ln -s /usr/lib/libXhp11.3 libXhp11.sl ln -s /usr/lib/libXi.3 libXi.sl ln -s /usr/lib/libXm.4 libXm.sl ln -s /usr/lib/libXp.2 libXp.sl ln -s /usr/lib/libXt.3 libXt.sl ln -s /usr/lib/libXtst.2 libXtst.sl GOLDQPK11i, December 2004 or later 11.11 required patches: 11.23 (PA-RISC) required patches: Ensure that unzip version is 5.5 or higher ($ unzip -v) [reference Note 263692.1], if not it can be downloadedhere 11.31 (PA-RISC) required patches: 11.23 (Itanium) required patches: For PL/SQL native compilation and installation of Pro*C/C++, Oracle Call Interface, Oracle C++ Call Interface, or Oracle XML Developer's Kit (XDK) , the following patches are required: The following JDK patches: 11.31 (Itanium) required patches: | Per HP Bug (Doc ID: KBRC00003627) NOTE: This bug is not applicable to 11.23 The default 64bit OS installation does not create a few required X library symbolic links. The following symbolic links need to be created: (NOTE: This task is required only if the Motif 2.1 Development Environment Package ( X11MotifDevKit.MOTIF21-PRG ) is not installed ). cd /usr/lib ln -s /usr/lib/libX11.3 libX11.sl ln -s /usr/lib/libXIE.2 libXIE.sl ln -s /usr/lib/libXext.3 libXext.sl ln -s /usr/lib/libXhp11.3 libXhp11.sl ln -s /usr/lib/libXi.3 libXi.sl ln -s /usr/lib/libXm.4 libXm.sl ln -s /usr/lib/libXp.2 libXp.sl ln -s /usr/lib/libXt.3 libXt.sl ln -s /usr/lib/libXtst.2 libXtst.sl GOLDQPK11i, June 2003 or later X11MotifDevKit (spatial only) HP-UX 11.23 (IA64) Operating System Patches: Ensure that unzip version is 5.5 or higher ($ unzip -v) [reference Note 263692.1], if not it can be downloadedhere 11.31 (Itanium) required patches: | Per HP Bug (Doc ID: KBRC00003627) NOTE: This bug is not applicable to 11.22,11.23 The default 64bit OS installation does not create a few required X library symbolic links. The following symbolic links need to be created: cd /usr/lib ln -s /usr/lib/libX11.3 libX11.sl ln -s /usr/lib/libXIE.2 libXIE.sl ln -s /usr/lib/libXext.3 libXext.sl ln -s /usr/lib/libXhp11.3 libXhp11.sl ln -s /usr/lib/libXi.3 libXi.sl ln -s /usr/lib/libXm.4 libXm.sl ln -s /usr/lib/libXp.2 libXp.sl ln -s /usr/lib/libXt.3 libXt.sl ln -s /usr/lib/libXtst.2 libXtst.sl HP-UX 11.0(64 bit) Operating System Patches: Ensure that unzip version is 5.5 or higher ($ unzip -v) [reference Note 263692.1], if not it can be downloaded here HP-UX 11i (64 Bit) Operating System Patches: HP-UX 11.22 /11.23 (IA64) Operating System Patches: 11.31 (Itanium) required patches: | HP-UX 11.0(64 bit) Operating System Patches: Dec 2000 patch bundle o PHCO_23092 s/b PHCO_23963 s/b PHCO_26111 o PHCO_23770 s/b PHCO_25707 s/b PHCO_27608 o PHCO_23919 s/b PHCO_27340 o PHKL_18543 o PHKL_23226 s/b PHKL_27510 s/b PHKL_30553 o PHKL_23813 s/b PHKL_25525 s/b PHKL_27364 s/b PHKL_31867 o PHKL_23814 s/b PHKL_24729 s/b PHKL_29256 o PHKL_23815 s/b PHKL_26337 s/b PHKL_27553 o PHKL_23857 s/b PHKL_25525 s/b PHKL_27364 s/b PHKL_31867 HP-UX 11i (64 bit) Operating System Patches Status | 11.0 patches: o PHSS_21947 s/b PHSS_24303 s/b PHSS_26559 o PHNE_20316 s/b PHNE_22566 s/b PHNE_25440 o PHKL_21392 s/b PHKL_24027 o PHKL_22145 s/b PHKL_25475 s/b PHKL_27510 s/b PHKL_30553 o PHKL_22266 s/b PHKL_27178 DART 49, 6/00 | Patch Bundle9905 o PHCO_17556 s/b PHCO_23651 o PHCO_17792 s/b PHCO_21187 s/b PHCO_25902 o PHCO_18229 s/b PHCO_23963 s/b PHCO_26111 o PHCO_19491 s/b PHCO_25707 s/b PHCO_27608 o PHCO_19666 s/b PHCO_23792 s/b PHSS_26960 o PHKL_14750 s/b PHKL_25475 s/b PHKL_27510 s/b PHKL_30553 o PHKL_17038 s/b PHKL_25525 s/b PHKL_27364 s/b PHKL_31867 o PHKL_18543 o PHKL_19800 s/b PHKL_24027 o PHKL_20016 o PHKL_20079 s/b PHKL_24027 o PHNE_19616 s/b PHNE_24100 s/b PHNE_25385 o PHSS_14582 s/b PHSS_26320 o PHSS_15853 s/b PHSS_23546 s/b PHSS_26566 o PHSS_16849 s/b PHSS_25718 s/b PHSS_27469 o PHSS_17535 s/b PHSS_25091 o PHSS_18066 o PHSS_18110 s/b PHSS_26273 s/b PHSS_28433 o PHSS_18430 s/b PHSS_25199 s/b PHSS_26495 o PHSS_18649 s/b PHSS_26320 o PHSS_19593 s/b PHSS_25447 s/b PHSS_27230 o PHSS_19178 s/b PHSS_25249 o PHSS_19748 s/b PHSS_25149 s/b PHSS_26490 o PHSS_19866 s/b PHSS_24303 s/b PHSS_26559 o PHSS_20544 s/b PHSS_26138 s/b PHSS_27858 o PHSS_20014 s/b PHSS_24303 s/b PHSS_26559 o PHSS_21180 | PHKL_14750 s/b PHKL_25475 s/b PHKL_27510 s/b PHKL_30553 o PHKL_17709 s/b PHKL_23792 s/b PHKL_26960 o PHKL_17869 s/b PHKL_18543 o PHNE_17446 s/b PHNE_21767 s/b PHNE_26771 s/b PHNE_29473 | 32/64bit 11.0 o PHNE_15995 s/b PHNE_21767 s/b PHNE_26771 s/b PHNE_29473 o PHNE_16283 s/b PHNE_21767 s/b PHNE_26771 s/b PHNE_29473 64bit 11.0 | 32/64bit 11.0 o PHNE_15995 s/b PHNE_21767 s/b PHNE_26771 s/b PHNE_29473 o PHNE_16283 s/b PHNE_21767 s/b PHNE_26771 s/b PHNE_29473 64bit 11.0 | |
| HP Kernel Settings | Refer to the 11GR2 HP-UX Install Guide for steps to do this. Section 2.8 Configuring Kernel Parameters on HP-UX Systems.Part Number E24336-02. | Important: For HP 9000/700 workstations Only, see Note 467166.1: set the following before starting the OUI,DBCA, or DBUA: $ export JAVA64FLAG="-d64" KSI_ALLOC_MAX (NPROC*8) * MSGMAP,MAXSWAPCHUNKS, NCALLOUT, SEMMAP,VX_NCSIZE,NFILE, MSGSEG are obsolete on 11.31 (Itanium and PA-RISC) and no longer required to be set. | KSI_ALLOC_MAX (NPROC*8) EXECUTABLE_STACK=0 MAX_THREAD_PROC 1024 MAXDSIZ 1073741824 bytes MAXDSIZ_64BIT 2147483648 bytes MAXFILES 65536 Note:1061351.1 MAXFILES_LIM 65536 Note:1061351.1 MAXSSIZ 134217728 bytes MAXSSIZ_64BIT 1073741824 MAXSWAPCHUNKS 16384* MAXUPRC ((NPROC*9)/10)+1 Bug 6995956 MSGMAP (MSGTQL+2) MSGMNI (NPROC) MSGSEG 32767 MSGTQL (NPROC) (B25293-01) NCSIZE (NINODE+1024)* NFILE (15*NPROC+2048) NFLOCKS (NPROC) (B25293-01) NINODE (8*NPROC+2048) NKTHREAD (((NPROC*7)/4)+16) NPROC 4096 SEMMAP (SEMMNI+2)* SEMMNI (NPROC) (B25293-01) SEMMNS (SEMMNI*2) SEMMNU (NPROC - 4) SEMVMX 32767 SHMMAX AvailMem SHMMNI 512 SHMSEG 120 VPS_CEILING 64 * MAXSWAPCHUNKS, SEMMAP, and VX_NCSIZE are obsolete on 11.23 PA-RISC and IPF and no longer need to be set 11.31 (Itanium and PA-RISC): | KSI_ALLOC_MAX (NPROC*8) MAX_THREAD_PROC 256 MAXDSIZ 1073741824 bytes MAXDSIZ_64BIT 2147483648 bytes MAXSSIZ 134217728 bytes MAXSSIZ_64BIT 1073741824 MAXSWAPCHUNKS 16384* MAXUPRC ((NPROC*9)/10)+1 Bug 6995956 MSGMAP (2+MSGMNI) MSGMNI (NPROC) MSGSEG 32767 MSGTQL (NPROC) NCSIZE (NINODE+VX_NCSIZE)* NFILE (15*NPROC+2048) NFLOCKS (NPROC) NINODE (8*NPROC+2048) NKTHREAD (((NPROC*7)/4)+16) NPROC 4096 SEMMAP (SEMMNI+2)* SEMMNI (NPROC) SEMMNS (SEMMNI*2) SEMMNU (NPROC - 4) SEMVMX 32768 SHMMAX AvailMem SHMMNI 512 SHMSEG 120 VPS_CEILING 64 * MAXSWAPCHUNKS, SEMMAP, and VX_NCSIZE are obsolete on 11.23 PA-RISC and IPF and no longer need to be set 11.31 (Itanium and PA-RISC): | KSI_ALLOC_MAX (NPROC*8) MAX_THREAD_PROC 256 MAXDSIZ 1073741824 bytes MAXDSIZ_64BIT 2147483648 bytes MAXSSIZ 134217728 bytes MAXSSIZ_64BIT 1073741824 MAXSWAPCHUNKS 16384* MAXUPRC ((NPROC*9)/10) MSGMAP (MSGTQL+2) MSGMNI (NPROC) MSGSEG 32767 MSGTQL (NPROC) NCALLOUT (NKTHREAD+16)* NCSIZE ((8*NPROC+2048)+VX_NCSIZE)* NFILE (15*NPROC+2048) NFLOCKS (NPROC) NINODE (8*NPROC+2048) NKTHREAD (((NPROC*7)/4)+16) NPROC 4096 SEMMAP (SEMMNI+2)* SEMMNI (NPROC) SEMMNS (SEMMNI*2) SEMMNU (NPROC - 4) SEMVMX 32768 SHMMAX AvailMem SHMMNI 512 SHMSEG 32 VPS_CEILING 64 * MAXSWAPCHUNKS, SEMMAP, NCALLOUT, and VX_NCSIZE are obsolete on 11.23 PA-RISC and IPF and no longer need to be set 11.31 (Itanium and PA-RISC): | SHMMAX AvailMem SHMMNI 512 SHMSEG 32 SEMMNI 8192 SEMMNS 16384 MAXDSIZ MAXDSIZ_64BIT MAXSSIZ MAXSSIZ_64BIT | SHMMAX 1GB SHMMNI 100 SHMSEG 10 SEMMNI 70 SEMMNS 200 nflocks = 200 + sum of the values of init.ora parameter db_filesfor all instances of oracle onthe machine. MAX_THREAD_PROC = 256 or more maxdsiz maxdsiz_64bit maxssiz maxssiz_64bit maxtsiz maxtsiz_64bit | SHMMAX 1GB SHMMNI 100 SHMSEG 10 SEMMNI 70 SEMMNS 200 maxdsiz and maxdsiz_64bit must be >= 128Mb | SHMMAX 1GB SHMMNI 100 SHMSEG 10 SEMMNI 70 SEMMNS 200 maxdsiz and maxdsiz_64bit must be >= 128Mb | SHMMAX 1GB SHMMNI 100 SHMSEG 10 SEMMNI 70 SEMMNS 200 maxdsiz and maxdsiz_64bit must be >= 128Mb | SHMMAX 1GB SHMMNI 100 SHMSEG 10 SEMMNI 70 SEMMNS 200 maxdsiz and maxdsiz_64bit must be >= 128Mb | |
| Oracle Version | 11.2 | 11.1 | 10.2 | 10.1 | 9.2.0 | 9.0.1 | 8.1.7 | 8.1.6 | 8.1.5 | 8.0.6 | 8.0.5 | |
| Oracle Solaris (32-bit and 64-bit stands for Oracle DB, not OS) | Solaris(64bit) 10 (update 6 or higher), Solaris 11 NOTE: On Solaris 11, only 11.2.0.3 is certified (not 11.2.0.1 or 11.2.0.2) Set the following variable before installing 11.2.0.3 on Solaris 11: | 2.9 Update 7 (09/04), 2.10 |
| Solaris SPARC 2.8, 2.9 (64bit) o Solaris SPARC 10 (64bit) requires 10.1.0.3.0 patchset o Solaris x86 2.9, 10 | o 2.6, 2.7, 2.8, 2.9 (32bit) o Solaris 10 (32bit) requires 9.2.0.4.0 patchset o 2.8, 2.9 (64bit) o Solaris 10 (64bit) requires 9.2.0.5.0 patchset | o 2.6, 2.7, 2.8, 2.9 (32bit) o 2.8, 2.9 (64bit) | o 2.6, 2.7, 2.8, 2.9 (32bit) o 2.8, 2.9 (64bit) | o 2.6, 2.7, 2.8 (32bit) o 2.7, 2.8 (64bit) | 2.6, 2.7, 2.8 (32bit) o 2.7 (64bit) | 2.5.1, 2.6, 2.7, 2.8 | 2.5.1, 2.6, 2.7, 2.8 | |
| Solaris Disk Space | 1.5 to 2G Database 4.7G Software | 1.5 to 2G Database 4.7G Software | 1.2G Database 1.5G - 3.5G Software 1G Companion 150M-1G Client | 1.2G Database 1.5G Software 1G Companion 150M-1G Client | 4.5G | 3.5G (32bit) 5.7G (64bit) | 1355Mb | 1170Mb | 811Mb | 600Mb | 600Mb | |
| Solaris RAM | Database: minimum 1GB, recommended 2GB Grid Infrastructure for standalone server: minimum 1.5GB (plus another 1GB if installing Database too), recommended 4GB | 1GB | 1GB | 512Mb 256Mb(Client/Compan) | 512Mb | 256Mb (32bit) 512Mb (64bit) | 128Mb | 128Mb | 128Mb | 64Mb or 128Mb / ConText | 32Mb or 128Mb / ConText | |
| Solaris swap | If RAM = 1 GB to 2 GB then 1.5 times RAM elseif RAM = 2 GB and 16 GB then match RAM else RAM > 16 GB then 16 GB Note: On Oracle Solaris, if you use non-swappable memory, such as ISM, then you should deduct the memory allocated to this space from the available RAM before calculating swap space. If you plan to install Oracle Database or Oracle RAC on systems using DISM, then available swap space must be at least equal to the sum of the SGA sizes of all instances running on the servers. | If RAM = 1024MB to 2048Mb then 1.5 times RAM elseif RAM > 2048MB and < 8192MB then match RAM else RAM > 8192MB then .75 times RAM | If RAM = 1024MB to 2048Mb then 1.5 times RAM elseif RAM > 2048MB and < 8192MB then match RAM else RAM > 8192MB then .75 times RAM | 1Gb or match RAM 512Mb(Client/Compan) | 1Gb or match RAM | 400Mb | 2*RAM or 400Mb | 2*RAM or 400Mb | 2*RAM | 3*RAM | 3*RAM | |
| Solaris tmp | 1GB | 275Mb | 400Mb | 400Mb | 400Mb | 400Mb | ? | ? | ? | 20Mb | 20Mb | |
| Solaris JDK & JRE | JDK 6 Update 10 (Java SE Development Kit 1.6 u10) or JDK 5 (1.5.0_16) | JDK 1.5.0_11 is installed | JDK 1.4.2_01 is installed JDK 1.4.2_08 is installed (x86_64) | JDK 1.4.2_01 is installed | JDK 1.3.1_02 & 1.1.8_12 (32bit) 1.1.8_15 (64bit) | JDK 1.2.2_07 & 1.1.8_12 | JDK 1.2.2. & 1.1.8_10 | 1.1.8_10 | ? | n/a | n/a | |
| Solaris Patches/ Packages | Required packages Solaris 10: | Important: For non-sun4u or sun4v workstations Only, seeNote 467166.1: Required Packages: Solaris 9 Reqd Patches: Solaris 10 Reqd Patches: To support Pro*C/C++,Pro*FORTRAN,Oracle Call Interface,Oracle C++ Call Interface,Oracle XML Developers Kit (XDK) | Required Packages: SUNWarc, SUNWbtool, SUNWhea, SUNWlibm, SUNWlibms, SUNWmfrun, SUNWsprot, SUNWsprox (Not applicable to Solaris 10), SUNWtoo, SUNWxwfnt, SUNWi1cs, SUNWi15cs, SUNWi1of, SUNWxcu4, SUNWuiu8 and SUNWulcf - See Note 290034.1 Solaris 8 Reqd Patches: Solaris 9 Reqd Patches: Solaris 10 Reqd Patches Solaris 10 x86_64 Reqd Patches: Solaris 10 special instructions: The Fair Share Scheduler(FSS) requires Solaris 10 11/06 or higher. IMPORTANT: Patch 4589082 needs to be installed prior to attempting an installation of 10.2 on Solaris 10 SPARC to avoid "Error in invoking target 'relink' of makefile 'precomp/lib/ins_precomp.mk' related to -ldce not found. See also Note 333348.1. IMPORTANT: See Note 1190843.1 regarding a related relinking issue in 10.2.0.5 | Required Packages: SUNWarc, SUNWbtool, SUNWhea, SUNWlibC (CRS only) SUNWlibm, SUNWlibms, SUNWmfrun, SUNWsprot, SUNWsprox (Not applicable to Solaris 10), SUNWtoo, SUNWxwfnt, SUNWi1cs, SUNWi15cs, SUNWi1of SUNWuiu8,SUNWulcf (if Bug 4025250 occurs) SUNWxcu4 Solaris 8 Reqd Patches: Solaris 9 Reqd Patches: Solaris 10 special instructions: | 32bit/64bit SUNWarc, SUNWbtool, SUNWhea, SUNWlibm, SUNWlibms, SUNWmfrun, SUNWsprot, SUNWtoo SUNWi1of and SUNWxwfnt (for Java) SUNWsprox (for 64bit Oracle) (Not applicable to Solaris 10) SUNWuiu8,SUNWulcf (if Bug 4025250 occurs) SUNWxcu4 108528-05 (2.8) Solaris 10 special instructions: | 32bit/64bit SUNWarc, SUNWbtool, SUNWhea, SUNWlibm, SUNWlibms, SUNWsprot, SUNWtoo SUNWxcu4 Additional 108528-01 (2.8) | SUNWarc, SUNWbtool, SUNWhea, SUNWlibm, SUNWlibms, SUNWsprot, SUNWtoo SUNWxcu4 2.6 requires at least 105181-15 | SUNWarc, SUNWbtool, SUNWhea, SUNWlibm, SUNWlibms, SUNWsprot, SUNWtoo 2.6 requires at least 105181-15 | SUNWarc, SUNWbtool, SUNWlibm, SUNWlibms,SUNWsprot, SUNWtoo, SUNWhea. Sun 2.6 requires 105181-06 | |||
| Solaris Kernel Settings | Refer to the 11g Solaris Install Guide. Part Number E24346-02 for steps to do this. Verifying UDP and TCP Kernel Parameters | SEMMNI 100 SEMMNS 1024(Obsolete) SEMMSL 256 SEMVMX 32767(Obsolete) SHMMAX 4294967295 SHMMNI 100 (Obsolete) NOEXEC_USER_STACK 1 Note: For Solaris 10 Oracle recommends still setting all these values in the /etc/system file, as well as, the Resource Control Facility. Refer to the 11g Solaris Install Guide for steps to do this. Here are the new names of the kernel parameters for Solaris 10 (Solaris 9 equivalents are in parentheses):
| SEMMNI 100 *** SEMMNS 1024 ** SEMMSL 256 *** SEMVMX 32767 ** SHMMAX 4294967295 SHMMIN 1 * SHMMNI 100*** SHMSEG 10 * NOEXEC_USER_STACK 1 * obsolete in Solaris 9 and 10 ** obsolete in Solaris 10 *** default value in Solaris 10 is already larger Note: for Solaris 10 SHMMAX which is now set through the Resource Control Facility not /etc/system. Refer to the 10gR2 for Solaris SPARC Installation guide for steps to do this, as well as, the Release Notes which has corrections: 10.2 Install Guides and Release Notes Here are the new names of the kernel parameters for Solaris 10 (Solaris 9 equivalents are in parentheses):
| SEMMNI 100 *** SEMMNS 1024 ** SEMMSL 256 *** SEMVMX 32767 ** SHMMAX 4294967295 SHMMIN 1 * SHMMNI 100*** SHMSEG 10 * NOEXEC_USER_STACK 1 * obsolete in Solaris 9 and 10 ** obsolete in Solaris 10 *** default value in Solaris 10 is already larger | SEMMNI 100 *** SEMMNS 1024 ** SEMMSL 256 *** SHMMAX 4294967295 SHMMIN 1 * SHMMNI 100*** SHMSEG 10 * NOEXEC_USER_STACK 1 * obsolete in Solaris 9 and 10 ** obsolete in Solaris 10 *** default value in Solaris 10 is already larger | SEMMNI 100 SEMMNS 256 SEMMSL 256 SHMMAX 4294967295 SHMMIN 1 SHMMNI 100 SHMSEG 10 | SHMMAX 4294967295 SHMMIN 1 SHMMNI 100 SHMSEG 10 SEMMNI 100 SEMMSL Set to 10 plus the largest PROCESSES parameter of any Oracle database on the system. SEMMNS Set to the sum of the PROCESSES parameter for each Oracle database, adding the largest one twice, then add an additional 10 for each database. SEMOPM 100 SEMVMX 32767 | SHMMAX 4294967295 SHMMIN 1 SHMMNI 100 SHMSEG 10 SEMMNI 100 SEMMSL Set to 10 plus the largest PROCESSES parameter of any Oracle database on the system. SEMMNS Set to the sum of the PROCESSES parameter for each Oracle database, adding the largest one twice, then add an additional 10 for each database. SEMOPM 100 SEMVMX 32767 | SHMMAX 0.5*(physical memory present in machine) SHMMIN 1 SHMMNI 100 SHMSEG 10 SEMMNI 100 SEMMSL Set to 10 plus the largest initsid.ora PROCESSES parameter of an Oracle database on the system. SEMMNS Set to the sum of the PROCESSES parameter for each Oracle database except the largest one, plus 2 times the largest PROCESSES value, plus 10 times the number of Oracle databases. SEMOPM 100 SEMVMX 32767 | SHMMAX 4294967295 SHMMIN 1 SHMMNI 100 SHMSEG 10 SEMMNS 200 SEMMNI 70 SEMMSL Equal to or greater than the value of the PROCESSES initialization parameter. | SHMMAX 4294967295 SHMMIN 1 SHMMNI 100 SHMSEG 10 SEMMNS 200 SEMMNI 70 SEMMSL Equal to or greater than the value of the PROCESSES initialization parameter. | |
| Oracle Version | 11.2 | 11.1 | 10.2 | 10.1 | 9.2.0 | 9.0.1 | 8.1.7 | 8.1.6 | 8.1.5 | 8.0.6 | 8.0.5 | |
| Tru64 OS do "/usr/sbin/sizer -v" to see specific version of Tru64, "uname -a" will not show it. | NA | Not Available | 5.1b | 5.1b | 5.1a, 5.1b | 5.0a, 5.1, 5.1a, 5.1b | 4.0D-G, 5.0, 5.0a, 5.1, 5.1a, 5.1b(EV5.6 processor or higher) do '/usr/sbin/psrinfo -v' | 4.0D-G, 5.0, 5.0a, 5.1 | 4.0D-G, 5.0, 5.0a, 5.1 | 4.0D-G, 5.0, 5.0a, 5.1, 5.1a | 4.0D-G, 5.0, 5.0a | |
| Tru64 Disk Space | NA | Not Available | 1.2G Database 3G Software 1G Companion 150M-1.9G Client | 1.2G Database 3G Software 1G Companion 150M-1.9G Client | 4.5G | 4.7G | 1.5G | 1.2G | 811Mb | 800Mb | 800Mb | |
| Tru64 RAM | NA | Not Available | 1Gb 256Mb (Client/Compan) | 512Mb 256Mb(Client/Compan) | 512Mb | 256Mb | 128Mb | 128Mb | 128Mb | 128Mb | 128Mb | |
| Tru64 swap | NA | Not Available | 2Gb or match RAM 512Mb(Client/Compan) | 1Gb or match RAM 512Mb(Client/Compan) | 1Gb or match RAM | 400Mb | 400Mb | 400Mb | 2-4*RAM | 2-4*RAM | 2-4*RAM | |
| Tru64 tmp | NA | Not Available | 400Mb | 400Mb | 400Mb | 400Mb | 75Mb | ? | 75Mb | 40Mb | 40Mb | |
| Tru64 JDK & JRE | NA | Not Available | SDK 1.4.2 needs to be installed download here | SDK 1.4.2 needs to be installed download here | JDK 1.3.1.03 & 1.1.8-10 | JDK 1.2.2-8 & 1.1.8-10 | JDK 1.2.2. & 1.1.8-7 | 1.1.8 | ? | n/a | n/a | |
| Tru64 Patches/ Packages | NA | Not Available | OSFCMPLRS OSFLIBA OSFPGMR OSFSER OSFX11 5.1B-3 (patchkit 5): T64V51BB26AS0005-20050502 | OSFSER OSFLIBA OSFPGMR OSFCMPLRS OSFX11 OSFXDEVX (Spatial only) OSFXINCLUDE (Spatial only) OSFXLIBA (Spatial only) 5.1B-3 (patchkit 5): T64V51BB26AS0005-20050502 | OSFSER OSFLIBA OSFPGMR OSFCMPLRS OSFX11 o 5.1a with patchkit 6 or higher required: o 5.1B-3 (patchkit 5): T64V51BB26AS0005-20050502 | OSFSER OSFLIBA OSFPGMR OSFCMPLRS OSFX11 5.0a 5.1 5.1a 5.1b = Patchkit 2 or greater, apply patch 01414.00 (included in Pk3) to address Note 261309.1 ld seg fault = Patchkit 2 or greater The following additional 5.1b O/S patch is also required, please obtain from HP: T64KIT0021686-V51BB24-E-20040223 -- File Locking issue | OSFLIBA, OSFPGMR, OSFCMPLRS 4.0D = Patchkit 4 or greater 4.0E = Patchkit 2 or greater 4.0F = Patchkit 1 or greater 5.1 = Patchkit 5 or greater with T64V51B19-C0125001-14319-E-20020516.tar (C1250.01 PatchId) and T64V51B19-C0151600-15736-E-20021017.tar (C1516.00 PatchId). .Go tohere to download 5.1a = Patchkit 3 or greater with T64V51AB3-C0074700-15747-E-20021018.tar (C747.00 PatchId). Go to here to download 5.1b = Patchkit 2 or greater, apply patch 01414.00 (included in Pk3) to address Note 261309.1 ld seg fault The following additional 5.1b O/S patch is also required, please obtain from HP: T64KIT0021686-V51BB24-E-20040223 -- File Locking issue | OSFLIBA, OSFPGMR, OSFCMPLRS 4.0D = Patchkit 4 or greater 4.0E = Patchkit 2 or greater 4.0F = Patchkit 1 or greater | OSFLIBA, OSFPGMR, OSFCMPLRS | OSFLIBA, OSFPGMR, OSFCMPLRS | ||
| Tru64 Kernel Settings | NA | Not Available | PER_PROC_STACK_SIZE MAX_PER_PROC_STACK_SIZE 33554432 PER_PROC_DATA_SIZE 335544320 or RAM (whichever is greater) MAX_PER_PROC_DATA_SIZE 335544320 or RAM (whichever is greater) PER_PROC_ADDRESS_SPACE 1073741824 or RAM (whichever is greater) MAX_PER_PROC_ADDRESS_SPACE 1073741824 or RAM (whichever is greater) SHM_MAX 4278190080 (4 GB less 16MB) SHM_MIN 1 SHM_MNI 256 SHM_SEG 256 NEW_WIRE_METHOD 1 (if >= 5.1b PK3 and patch T64KIT0021686-V51BB24-E-20040223)Note 272697.1 for 5.1b PK5 and higher is defaulter to 1 and can no longer be changed NEW_WIRE_METHOD 0 (if <= 5.1b PK2) Note 272697.1 VM_BIGPG_ENABLED 0 FIFO_DO_ADAPTIVE 0 SSM_THRESHOLD * MSG_SIZE 32768 MAX_OBJS 5120 MAX_ASYNC_REQ 256 MAX_SESSIONS 500 RDG_MAX_AUTO_MSG_WIRES 0 RDG_AUTO_MSG_WIRES 0 AIO_TASK_MAX_NUM 8193 EXEC_DISABLE_ARG_LIMIT 1 * Set this attribute to 0 only if the rad_gh_regions[n] or gh_chunks attributes are set in the vm subsystem. Otherwise, do not change the value. | PER_PROC_STACK_SIZE MAX_PER_PROC_STACK_SIZE 33554432 PER_PROC_DATA_SIZE 335544320 MAX_PER_PROC_DATA_SIZE 335544320 PER_PROC_ADDRESS_SPACE 1073741824 or RAM (whichever is greater) MAX_PER_PROC_ADDRESS_SPACE 1073741824 or RAM (whichever is greater) SHM_MAX 4278190080 (4 GB less 16MB) SHM_MIN 1 SHM_MNI 256 SHM_SEG 256 NEW_WIRE_METHOD 1 (if >= 5.1b PK3 and patch T64KIT0021686-V51BB24-E-20040223)Note 272697.1 for 5.1b PK5 and higher is defaulter to 1 and can no longer be changed NEW_WIRE_METHOD 0 (if <= 5.1b PK2) Note 272697.1 VM_BIGPG_ENABLED 0 FIFO_DO_ADAPTIVE 0 SSM_THRESHOLD * MSG_SIZE 32768 MAX_OBJS 5120 MAX_ASYNC_REQ 256 MAX_SESSIONS 500 RDG_MAX_AUTO_MSG_WIRES 0 RDG_AUTO_MSG_WIRES 0 AIO_TASK_MAX_NUM 8193 * Set this attribute to 0 only if the rad_gh_regions[n] or gh_chunks attributes are set in the vm subsystem. Otherwise, do not change the value. | MAX_PER_PROC_STACK_SIZE 33554432 PER_PROC_STACK_SIZE PER_PROC_DATA_SIZE 201326592 SHM_MAX 4278190080 (4 GB less 16MB) SHM_MIN 1 SHM_MNI 256 SHM_SEG 128 NEW_WIRE_METHOD 1 (if >= 5.1b PK3 and patch T64KIT0021686-V51BB24-E-20040223 or 5.1a PK6)Note 272697.1 for 5.1b PK5 and higher is defaulter to 1 and can no longer be changed NEW_WIRE_METHOD 0 (if <= 5.1b PK2) Note 272697.1 VM_BIGPG_ENABLED 0 FIFO_DO_ADAPTIVE 0 Alpha processor EV5.6 or later | PER_PROC_STACK_SIZE 33554432 MAX_PER_PROC_STACK_SIZE 536870912 PER_PROC_DATA_SIZE RAM MAX_PER_PROC_DATA_SIZE RAM PER_PROC_ADDRESS_SIZE RAM MAX_PER_PROC_ADDRESS_SIZE RAM SHM_MAX 4278190080 (4 GB less 16MB) SHM_MIN 1 SHM_MNI 256 SHM_SEG 128 NEW_WIRE_METHOD 1 (if >= 5.1b PK3 and patch T64KIT0021686-V51BB24-E-20040223) Note 272697.1 for 5.1b PK5 and higher is defaulter to 1 and can no longer be changed NEW_WIRE_METHOD 0 (if <= 5.1b PK2) Note 272697.1 FIFO_DO_ADAPTIVE 0 Alpha processor EV5.6 or later | SHMMAX 2139095040(2GB-8MB) SHMMIN 1 SHMMNI 100 SHMSEG 32 NEW_WIRE_METHOD 1 (if >= 5.1b PK3 and patch T64KIT0021686-V51BB24-E-20040223) Note 272697.1 for 5.1b PK5 and higher is defaulter to 1 and can no longer be changed NEW_WIRE_METHOD 0 (if <= 5.1b PK2)Note 272697.1 FIFO_DO_ADAPTIVE 0 vm-mapentries=1024 in the /etc/sysconfigtab, verify with '/sbin/sysconfig -q vm' - applies to OS versions below 5.0, starting in 5.0 it is autoset Alpha processor EV5.6 or later | SHMMAX 2139095040(2GB-8MB) SHMMIN 1 SHMMNI 100 SHMSEG 32 | SHMMAX 8388608 or higher than the maximum SGA size. Note: If anticipated SGA size is greater than 2 GB, set it to 2 GB - 8 MB; otherwise, round the SGA sizeup to the next 8 MB and set that to SHMMAX. SHMMIN 1 SHMMNI 100 SHMSEG 32 | SHMMAX 2139095040 (2 GB-8 MB) SHMMIN 1 SHMMNI 100 SHMSEG 32 | SHMMAX 8388608 or higher than the maximum SGA size. Note: If anticipated SGA size is greater than 2 GB, set it to 2 GB - 8 MB; otherwise, round the SGA size up to the next 8 MB and set that to SHMMAX. SHMMIN 1 SHMMNI 100 SHMSEG 32 | |
| Oracle Version | 11.2 | 11.1 | 10.2 | 10.1 | 9.2.0 | 9.0.1 | 8.1.7 | 8.1.6 | 8.1.5 | 8.0.6 | 8.0.5 | |
| Linux x86 OS (See Note 225710.1 for supported kernels) andNote 265262.1for "Things to know about Linux" | o RHEL4,OEL4 - Update 7 or greater which is Kernel 2.6.9-78 or newer o RHEL5, OEL5 - 5.2 or greater which is Kernel 2.6.18-92 or newer o SLES10 - Kernel 2.6.16.21 or higher o SLES 11 - Kernel 2.6.27.19-5 or greater o Asianux Server 3 SP2 | o RHEL4, OEL4, Asianux 2.0 2.6.9 o RHEL5, OEL5, Asianux Server 3 2.6.18 o SuSE SLES10 2.6.16.21 o SuSE SLES11 - Kernel 2.6.27.19-5 or greater | o RHEL 3 AS/ES ( RHEL3 ) (Update 4 or later) 2.4.21-27.EL or higher o RHEL 4 AS/ES ( RHEL4 ) and Oracle Enterprise Linux 4 ( OEL4 ) 2.6.9-5.0.5.EL or higher o RHEL 5 AS/ES ( RHEL5 ) and Oracle Enterprise Linux 5 ( OEL5 ) 2.6.18-8 or higher o SuSE SLES9 2.6.5-7.201 or higher o SuSE SLES10 o SuSE SLES11 - Kernel 2.6.27.19-5 or greater o Asianux 1.0 2.4.21-27.EL or higher o Asianux 2.0 2.6.9-5.0.5.EL or higher | o RHEL AS/ES 2.1 (Update 3 or higher) 2.4.9-e34 or higher o RHEL AS/ES 3.0 (Update 2 or higher) 2.4.21-15.EL or higher o RHEL4 (10.1.0.3.0 patchset required) refer to 10.1.0.3.0 Release Notes o SuSE SLES8 (Service Pack 3 or higher) 2.4.21-138 o SuSE SLES9 2.6.5-7.5 o Red Flag Advanced Server 4.0 (China only) o Miracle Linux Std Ed 2.1 (Japan only) o Asianux 1.0 | o Red Hat Enterprise AS/ES 2.1 2.4.9-e34 or higher o Red Hat Enterprise AS/ES 3.0 2.4.21-15 o RHEL4 (9.2.0.6.0 patchset required or 9.2.0.5.0 patchset and Patch 4276910 required) refer to 9.2.0.4 Release Notes o SuSE SLES8 2.4.21-138 o SuSE SLES9 2.6.5-7.97 o United Linux 1.0 (SP3 or higher) o Red Flag DC Server 4.0 (China and Hong Kong only) o Monta Vista Carrier Grade Linux 3.0 (embedded) o Miracle Linux Std Ed 2.1 (Japan only) 2.4.7 o Asianux 1.0 | Caldera OU8+LKP, Red Hat 7.1, Advanced Server 2.1, SuSE 7.1, 7.2, SLES7, Kernel 2.4.4 | Caldera OU8+LKP, Miracle 1.0, 2.0, Red Hat 6.1,6.2, EE 6.2, 7.0, 7.1, Advanced Server 2.1, SuSE 7.0, 7.1, 7.2, SLES7, Kernel 2.2.16 | Miracle 1.0, Red Hat 6.0,6.1,6.2, EE 6.2, SuSE 6.3, 6.4, 7.0, VA 6.2, Kernel 2.2 | Red Hat 6.2, EE 6.2, SuSE 6.3, 6.4, Kernel 2.2 | Red Hat 6.2, SuSE 6.4, 7.0, Kernel 2.0.34 | 2.0.34 | |
| Linux x86 Disk Space | 3.8G Database | 2G Database 3.5G Install | 1.2G Database 1.5 to 3.5G Install | 1.2G Database 1.5G Software 1G Companion 150M-650M Client | 4.5G | 3.5G | 900Mb | 1G | 811Mb | 400Mb | 400Mb | |
| Linux x86 RAM | 1GB | 1GB | 1GB | 512Mb 256Mb(Client/Compan) | 512Mb | 512Mb | 128Mb | 128Mb | 128Mb | 32Mb | 32Mb | |
| Linux x86 swap | If RAM=1 GB to 2 GB then 1.5 times RAM If RAM=2 GB to 16 GB then equal to RAM If greater than 16 GB then 16 GB | If RAM between 1 GB and 2 GB then 1.5 times RAM elseif RAM between 2 GB and 16 GB then match RAM else RAM > 16 GB then 16 GB | If RAM = 1024MB to 2048Mb then 1.5 times RAM elseif RAM > 2048MB and < 8192MB then match RAM else RAM > 8192MB then .75 times RAM | 1Gb or match RAM 512Mb(Client/Compan) | 1Gb or match RAM | 512Mb | 400Mb | 400Mb | 256Mb | 3*RAM | 3*RAM | |
| Linux x86 tmp | 1024Mb | 400Mb | 400Mb | 400Mb | 400Mb | 400Mb | 75Mb | 75Mb | 75Mb | 75Mb | 20Mb | |
| Linux x86 JDK & JRE | JDK (version TBS) is installed | JDK (version TBS) is installed | JDK 1.4.2_08 is installed | JDK 1.4.2_02 is installed | Sun JDK 1.3.1_02 & Blackdown 1.1.8_v3 | Blackdown JDK 1.1.8_3 & 1.1.8_v3 | JDK 1.2.2. & 1.1.8-3from IBM | 1.1.8 | 1.1.6v5 | n/a | n/a | |
| Linux x86 Patches/ Packages | RHEL4, OEL4:
| Asianux 2.0,OEL4,RHEL4: refer to Note 430653.1
| RHEL3: default RPMS (see Note 376183.1)
| RHEL ES/AS 2.1:
| RHEL ES/AS 2.1:
| make-3.79, and binutils-2.10. | GLIBC package version 2.1.3 or higher | GLIBC package version 2.1 | GNU C Library, version 2.0.6 GLIBC package version 2.1 | GNU C Library, version 2.0.7 TCL library (libtcl.so), version 8.0.2-16 | GNU C Library, version 2.0.7 TCL library (libtcl.so), version 8.0.2-16 | |
| Linux x86 Kernel Settings | kernel.shmmni = 4096 kernel.sem = 250 32000 100 128 fs.file-max = 6815744 net.ipv4.ip_local_port_range = 9000 65500 net.core.rmem_default = 262144 net.core.rmem_max = 4194304 net.core.wmem_default = 262144 net.core.wmem_max = 1048576 | SEMMSL 250 SEMMNS 32000 SEMMNI 128 SEMOPM 100 SHMMAX RAM times 0.5 Note 567506.1) SHMMNI 4096 SHMALL = SHMMAX/pagesize FILE-MAX =6815744 IP_LOCAL_PORT_RANGE 9000 65500 RMEM_DEFAULT 262144 RMEM_MAX 4194304 WMEM_DEFAULT 262144 WMEM_MAX NET.IPV4.TCP_WMEM 262144 262144 262144 | SuSE SLES9: Other Linux OS: | SEMMSL 250 SEMMNS 32000 SEMMNI 128 SEMOPM 100 SEMVMX 32767 SHMMAX 2147483648 One-half the size of your system's physical memory. Check your system for additional restrictions. SHMMNI 4096 SHMALL = SHMMAX/pagesize FILE-MAX 65536 IP_LOCAL_PORT_RANGE 9000 65500 | SEMMNI 100 SEMMNS 256 SEMMSL 100 SEMOPM 100 SEMVMX 32767 SHMMAX 2147483648 One-half the size of your system's physical memory. Check your system for additional restrictions. SHMMIN 1 SHMMNI 4096 SHMSEG 4096 | SEMMNI 100 SEMMNS 256 SEMMSL 100 SEMOPM 100 SEMVMX 32767 SHMMAX 2147483648 One-half the size of your system's physical memory. Check your system for additional restrictions. SHMMIN 1 SHMMNI 4096 SHMSEG 4096 | SHMMAX 0.5*(physical memory present in machine) but not greater then 4Gb SHMMIN 1 SHMMNI 100 SHMSEG 10 SEMMNI 100 SEMMSL Set to 10 plus the largest PROCESSES parameter of any Oracle database on the system. SEMMNS Set to the sum of the PROCESSES parameter for each Oracle database, adding the largest one twice, then add an additional 10 for each database. SEMOPM 100 SEMVMX 32767 | SHMMAX 0.5*(physical memory present in machine) but not greater then 4Gb SHMMIN 1 SHMMNI 100 SHMSEG 10 SEMMNI 100 SEMMSL Set to 10 plus the largest PROCESSES parameter of any Oracle database on the system. SEMMNS Set to the sum of the PROCESSES parameter for each Oracle database, adding the largest one twice, then add an additional 10 for each database. SEMOPM 100 SEMVMX 32767 | SHMMAX 0.5 *(physical memory present in machine) but not greater then 4Gb SHMMIN 1 SHMMNI 100 SHMSEG 10 SEMMNI 100 SEMMSL Set to 10 plus the largest initsid.ora PROCESSES parameter of an Oracle database on the system. SEMMNS Set to the sum of the PROCESSES parameter for each Oracle database except the largest one, plus 2 times the largest PROCESSES value, plus 10 times the number of Oracle databases. SEMOPM 100 SEMVMX 32767 | SHMMAX (1/4 of RAM) but not greater then 4Gb SHMMIN 1 SHMMNI 100 SHMSEG 10 SEMMNS 200 SEMMNI 70 SEMMSL Equal to or greater than the value of the PROCESSES initialization parameter. | SHMMAX (1/4 of RAM) but not greater then 4Gb SHMMIN 1 SHMMNI 100 SHMSEG 10 SEMMNS 200 SEMMNI 70 SEMMSL Equal to or greater thanthe value of the PROCESSES initialization parameter. | |
| Oracle Version | 11.2 | 11.1 | 10.2 | 10.1 | 9.2.0 | 9.0.1 | 8.1.7 | 8.1.6 | 8.1.5 | 8.0.6 | 8.0.5 | |
| Linux x86_64 EM64T AMD64 OS (See Note 225710.1 for supported kernels) andNote 265262.1for "Things to know about Linux" | o RHEL4,OEL4 - update 7 or greater |
| o Red Hat Enterprise Linux ( RHEL 3 ) AS/ES (Update 4 or later) 2.4.21-27.EL o RHEL4 AS/ES (Update 1 or later) or OEL4 2.6.9-11.EL o RHEL5 AS/ES or OEL5 2.6.18-8 or higher o SUSE Linux Enterprise Server 9.0 (SLES9) with SP2 or later 2.6.5-7.201 o SuSE Linux Enterprise Server 10 (SLES10) 2.6.16.21-0.8 (or later) o SuSE Linux Enterprise Server 11 (SLES11) 2.6.27.19-5 or greater o Asianux 2.0 | o Red Hat Enterprise AS/ES 3.0 (Update 2 or higher) 2.4.21-15.EL o Red Hat Enterprise AS/ES 4.0 (Update 1 or higher) 2.6.9-11.EL smp o SuSE SLES8 (Service Pack 3 or higher) 2.4.21-185-smp o SuSE SLES9 2.6.5-7.97 o Asianux 1.0 requires 10.1.0.3 | o Red Hat Enterprise AS/ES 3.0 2.4.21-9 o Red Hat Enterprise AS/ES 4.0 minimum patchset level is 9.2.0.7.0 o SuSE SLES8 2.4.21-185 o SuSE SLES9 9.2.0.6 Required - needed for EM64T patch 4261532 & patch 4233179 | |||||||
| Linux x86_64 EM64T AMD64 Disk Space | 3.8Gb Database | 1.68G Database 3.8G to 4.4G Software | 1.2G Database 1.5 to 3.5G Install | 1.2G Database 1.5G Software 1G Companion 150M-650M Client | 4.5G | |||||||
| Linux x86_64 EM64T AMD64 RAM | Database: minimum 1GB, recommended 2GB Grid Infrastructure for standalone server: minimum 1.5GB (plus another 1GB if installing Database too), recommended 4GB | 1GB | 1GB | 512Mb 256Mb(Client/Compan) | 512Mb | |||||||
| Linux x86_64 EM64T AMD64 swap | 11.2 DB Installation Guide for Linuxsays: If RAM between 1 GB and 2 GB then 1.5 times the size fo RAM. If RAM between 2 GB to 16 GB then equal to the size of RAM. If RAM greater than 16 GB then 16 GB. 11.2 Grid Infrastructure (GI) Installation Guide for Linux says: | If RAM 1 GB and 2 GB then 1.5 times the size fo RAM. If RAM 2 GB to 16 GB then equal to the size fo RAM. If RAM greater than 16 GB then 16 GB Automatic Memory Management Note: MEMORY_MAX_TARGET and MEMORY_TARGET cannot be used when LOCK_SGA is enabled or with huge pages on Linux | If RAM = 1024MB to 2048Mb then 1.5 times RAM elseif RAM > 2048MB and < 8192MB then match RAM else RAM > 8192MB then .75 times RAM | 1Gb or match RAM 512Mb(Client/Compan) | 1Gb or match RAM | |||||||
| Linux x86_64 EM64T AMD64 tmp | 1024Mb | 400Mb | 400Mb | 400Mb | 400Mb | |||||||
| Linux x86_64 EM64T AMD64 JDK & JRE | You can use Sun JDK 1.5.0-06 with the JNDI extension JDK versions with the Oracle Java Database Connectivity and Oracle Call Interface drivers. However, these are not mandatory for the installation | You can use Sun JDK 1.5.0-06 with the JNDI extension JDK versions with the Oracle Java Database Connectivity and Oracle Call Interface drivers. However, these are not mandatory for the installation | JDK 1.4.2_08 is installed | JDK 1.4.2_02 is installed | o Sun JDK 1.4.2_03 is installed | |||||||
| Linux x86_64 EM64T AMD64 Patches/ Packages | RHEL6,OEL6: Refer to Note 1441282.1 RHEL5,OEL5: Refer to Note 880989.1 binutils-2.17.50.0.6-6.el5 (x86_64) compat-libstdc++-33-3.2.3-61 (x86_64) << both ARCH's are required. See next line. compat-libstdc++-33-3.2.3-61 (i386) << both ARCH's are required. See previous line. elfutils-libelf-0.125-3.el5 (x86_64) glibc-2.5-24 (x86_64) << both ARCH's are required. See next line. glibc-2.5-24 (i686) << both ARCH's are required. See previous line. glibc-common-2.5-24 (x86_64) ksh-20060214-1.7 (x86_64) libaio-0.3.106-3.2 (x86_64) << both ARCH's are required. See next line. libaio-0.3.106-3.2 (i386) << both ARCH's are required. See previous line. libgcc-4.1.2-42.el5 (i386) << both ARCH's are required. See next line. libgcc-4.1.2-42.el5 (x86_64) << both ARCH's are required. See previous line. libstdc++-4.1.2-42.el5 (x86_64) << both ARCH's are required. See next line. libstdc++-4.1.2-42.el5 (i386) << both ARCH's are required. See previous line. make-3.81-3.el5 (x86_64) The remaining Install Guide requirements will have to be installed: elfutils-libelf-devel-0.125-3 (x86_64) a.) requires elfutils-libelf-devel-static-0.125-3 (x86_64) as a prerequisite, as listed below. b.) elfutils-libelf-devel and elfutils-libelf-devel-static each depend upon the other. Therefore, they must be installed together, in one (1) "rpm -ivh" command as follows: rpm -ivh elfutils-libelf-devel-0.125-3.el5.x86_64.rpm elfutils-libelf-devel-static-0.125-3.el5.x86_64.rpm glibc-headers-2.5-24 (x86_64) a.) requires kernel-headers-2.6.18-92 (x86_64) as a prerequisite, as listed below glibc-devel-2.5-24 (x86_64) << both ARCH's are required. See next item. glibc-devel-2.5-24 (i386) << both ARCH's are required. See previous item. gcc-4.1.2-42.el5 (x86_64) a.) requires libgomp-4.1.2-42 (x86_64) as a prerequisite, as listed below libstdc++-devel-4.1.2-42 (x86_64) gcc-c++-4.1.2-42.el5 (x86_64) libaio-devel-0.3.106-3.2 (x86_64) << both ARCH's are required. See next item libaio-devel-0.3.106-3.2 (i386) << both ARCH's are required. See previous item. sysstat-7.0.2-1 (x86_64) unixODBC-2.2.12 (x86_64) << both ARCH's are required. See next item and Note:762206.1 unixODBC-2.2.12 (i386) << both ARCH's are required. See previous item and Note:762206.1 unixODBC-devel-2.2.12 (x86_64) << both ARCH's are required. See next item and Note:762206.1 unixODBC-devel-2.2.12 (i386) << both ARCH's are required. See previous item and Note:762206.1 NOTE: If you download unixODBC from ftp://ftp.unixodbc.org/pub/unixODBC/ then the header and library files are distributed together in one gzipped tar file. RHEL4,OEL4: SLES10:- SLES11 :- | Asianux 2.0 [Oracle, Red Hat] Enterprise Linux 4.0 (See Note 437123.1):
| Red Hat Enterprise Linux 3.0: Refer to Note 353735.1
| RHEL 3 (Update 2): Refer to Note 351679.1
| RHEL ES/AS 3 Please refer to Note: 308588.1LD_ASSUME_KERNEL=2.4.19
| |||||||
| Linux x86_64 EM64T AMD64 Kernel Settings | kernel.shmmni = 4096 kernel.sem = 250 32000 100 128 fs.file-max = 6815744 net.ipv4.ip_local_port_range = 9000 65500 net.core.rmem_default = 262144 net.core.rmem_max = 4194304 net.core.wmem_default = 262144 net.core.wmem_max = 1048576 kernel.shmall = physical RAM size / pagesize For most systems, this will be the value 2097152. See Note: 301830.1 for more information. kernel.shmmax = RAM times 0.5 (or higher at customer's discretion - see Note:567506.1) kernel.shmmni = 4096 kernel.sem = 250 32000 100 128 | SEMMSL 250 SEMMNS 32000 SEMMNI 128 SEMOPM 100 SHMMAX RAM times 0.5 (Note 567506.1) SHMMNI 4096 SHMALL = SHMMAX/pagesize (Note:301830.1) FILE-MAX 6815744 IP_LOCAL_PORT_RANGE 9000 65500 RMEM_DEFAULT 262144 RMEM_MAX 4194304 WMEM_DEFAULT 262144 WMEM_MAX NET.IPV4.TCP_WMEM (WMEM_DEFAULT) (WMEM_DEFAULT) (WMEM_MAX) To increase the shell limits: | SEMMSL 250 SEMMNS 32000 SEMMNI 128 SEMOPM 100 SHMMAX RAM times 0.5 (note:567506.1) SHMMNI 4096 SHMALL = SHMMAX/pagesize (note:301830.1) FILE-MAX 65536 IP_LOCAL_PORT_RANGE 9000 65500 RMEM_DEFAULT 262144 RMEM_MAX 2097152 WMEM_DEFAULT 262144 WMEM_MAX NET.IPV4.TCP_WMEM (WMEM_DEFAULT) (WMEM_DEFAULT) (WMEM_MAX) | SEMMSL 250 SEMMNS 32000 SEMMNI 128 SEMOPM 100 SEMVMX 32767 SHMMAX 2147483648 One-half the size of your system's physical memory. Check your system for additional restrictions. SHMMNI 4096 SHMALL = SHMMAX/pagesize (note:301830.1) FILE-MAX 65536 IP_LOCAL_PORT_RANGE 9000 65500 To use hugepages, or to accommodate the VLM window size on Red Hat Enterprise Linux 4.0, you must increase the default maximum size of the per-process locked memory. To increase the per-process maximum locked memory limit, add the following lines to the /etc/security/limits.conf file, where oracle is the user that administers the database. Refer Note 361468.1: oracle soft memlock 5243000 oracle hard memlock 5243000 | SEMMSL 250 SEMMNS 32000 SEMMNI 128 SEMOPM 100 SEMVMX 32767 SHMMAX 2147483648 One-half the size of your system's physical memory. Check your system for additional restrictions. SHMMNI 4096 SHMALL = SHMMAX/pagesize (note:301830.1) FILE-MAX 65536 IP_LOCAL_PORT_RANGE 9000 65500 | |||||||
| Oracle Version | 11.2 | 11.1 | 10.2 | 10.1 | 9.2.0 | 9.0.1 | 8.1.7 | 8.1.6 | 8.1.5 | 8.0.6 | 8.0.5 | |
| Linux Itanium OS (See Note 225710.1 for supported kernels),(SeeNote 1130325.1for Support Status-Oracle Database on Linux Itanium)and Note 265262.1 for "Things to know about Linux" | NA | Not Available | o RHEL AS/ES 3.0 (Update 4 or higher) 2.4.21-20.EL o RHEL AS/ES 4.0 (Update 1 or higher) 2.6.9-11.EL o SuSE SLES9 (SP2 or higher) 2.6.5-199 o SuSE SLES-10 o RHEL 5.0 (Note 748378.1) 2.6.18-8 or higher Note: for all Itanium systems using "Montecito" processors, refer tonote:400227.1 for special installation instructions | o RHEL AS/ES 2.1 (Update 6 or higher) 2.4.18-e52 o RHEL AS/ES 3.0 (Update 4 or higher) 2.4.21-27.EL o RHEL AS/ES 4.0 (Update 1 or higher) 2.6.9-11.EL.smp o Red Flag Advanced Server 4.0 for Itanium 2 (China and Hong Kong only) o SuSE SLES8 (SP4 or later) 2.4.21-278 o SuSE SLES9 (SP1 or later) 2.6.5-7.139 Note: for all Itanium systems using "Montecito" processors, refer tonote:400227.1 for special installation instructions | o Red Hat Enterprise AS/ES 2.1 2.4.18-e.14 o Red Hat Enterprise AS/ES 3.0 o Red Hat Enterprise AS/ES 4.0 2.6.9-11 o SuSE SLES8 o SuSE SLES9 o United Linux 1.0 o Red Flag Advanced Server 4.0 for Itanium 2 (China and Hong Kong only) 2.4.18-e14.ia64.rpm Note: for all Itanium systems using "Montecito" processors, refer tonote:400227.1 for special installation instructions | |||||||
| Linux Itanium Disk Space | NA | Not Available | 1.2G Database 1.5 to 3.5G Install | 1.2G Database 1.5G Software 1G Companion 150M-650M Client | 4.5G | |||||||
| Linux Itanium RAM | NA | Not Available | 1Gb | 512Mb 256Mb(Client/Compan) | 512Mb | |||||||
| Linux Itanium swap | NA | Not Available | If RAM = 1024MB to 2048Mb then 1.5 times RAM elseif RAM > 2048MB and < 8192MB then match RAM else RAM > 8192MB then .75 times RAM | 1Gb or match RAM 512Mb(Client/Compan) | 1Gb or match RAM | |||||||
| Linux Itanium tmp | NA | Not Available | 400Mb | 400Mb | 400Mb | |||||||
| Linux Itanium JDK & JRE | NA | Not Available | JDK 1.4.2_08 is installed | JDK 1.4.2_02 is installed | o Sun JDK 1.4.1 is installed but is mandatory to patch it to 1.4.2 | |||||||
| Linux Itanium Patches/ Packages | NA | Not Available | Red Hat Enterprise Linux 3.0:
| RHEL ES/AS 2.1 (Update 6 or higher)
| All IA64 OS Versions - for Async I/O functionality to work you need to installPatch 3016968 on top of 9.2.0.4.0 or 9.2.0.5.0 RHEL ES/AS 2.1
| |||||||
| Linux Itanium Kernel Settings | NA | Not Available | Not Available | SEMMSL 250 SEMMNS 32000 SEMMNI 128 SEMOPM 100 SHMMAX RAM times 0.5 (Note 567506.1) SHMMNI 4096 SHMALL = SHMMAX/pagesize (note:301830.1) FILE-MAX 65536 IP_LOCAL_PORT_RANGE 9000 65500 RMEM_DEFAULT 262144 RMEM_MAX 2097152 WMEM_DEFAULT 262144 WMEM_MAX 262144 WMEM_MAX 262144 NET.IPV4.TCP_WMEM (WMEM_DEFAULT) (WMEM_DEFAULT) (WMEM_MAX) | SEMMSL 250 SEMMNS 32000 SEMMNI 128 SEMOPM 100 SEMVMX 32767 SHMMAX 2147483648 One-half the size of your system's physical memory. Check your system for additional restrictions. SHMMNI 4096 SHMALL = SHMMAX/pagesize (note:301830.1) FILE-MAX 65536 IP_LOCAL_PORT_RANGE 9000 65500 WMEM_MAX 262144 NET.IPV4.TCP_WMEM (WMEM_DEFAULT) (WMEM_DEFAULT) (WMEM_MAX) | SEMMNI 100 SEMMNS 256 SEMMSL 100 SEMOPM 100 SEMVMX 32767 SHMMAX 2147483648 One-half the size of your system's physical memory. Check your system for additional restrictions. SHMMIN 1 SHMMNI 4096 SHMSEG 4096 | ||||||
| Oracle Version | 11.2 | 11.1 | 10.2 | 10.1 | ||||||||
| Linux on 64-bit zSeries | Note:1306889.1 Requirements for Installing Oracle 11gR2 on RHEL 5 Note:1290644.1 Requirements for Installing Oracle 11gR2 64-bit on SLES 11 Note:1308859.1 Requirements for Installing Oracle 11gR2 on SLES 10 | Not available | Note:415182.1 DB Install Requirements Quick Reference - zSeries based Linux | Note:415182.1 DB Install Requirements Quick Reference - zSeries based Linux | ||||||||
| Oracle Version | 11.2 | 11.1 | 10.2 | 10.1 | 9.2.0 | 9.0.1 | 8.1.7 | 8.1.6 | 8.1.5 | 8.0.6 | 8.0.5 | |
| Linux on Power PC OS (See Note 225710.1 for supported kernels) andNote 265262.1for "Things to know about Linux" | NA | Not Available | o Red Hat Enterprise Linux AS/ES 5.0 (Update 1 or later) 2.6.18-53.el5 o Red Hat Enterprise Linux AS/ES 4.0 (Update 1 or later) 2.6.9-11.EL o SUSE Linux Enterprise Server 9.0 2.6.5-7.191-pseries64 o SUSE Linux Enterprise Server 10.0 o Asianux 2.0 See Note:341507.1 for further information | |||||||||
| Linux on Power PC Disk Space | NA | Not Available | 1.2G Database 1.5 to 3.5G Install | |||||||||
| Linux on Power PC RAM | NA | Not Available | 1Gb | |||||||||
| Linux on Power PC swap | NA | Not Available | If RAM = 1024MB to 2048Mb then 1.5 times RAM elseif RAM > 2048MB and < 8192MB then match RAM else RAM > 8192MB then .75 times RAM | |||||||||
| Linux on Power PC tmp | NA | Not Available | 400Mb | |||||||||
| Linux on Power PC JDK & JRE | NA | Not Available | JDK 1.4.2_08 is installed | |||||||||
| Linux on Power PC Patches/ Packages | NA | Not Available | Please refer to Note: 341507.1 Red Hat Enterprise Linux 4.0:
| |||||||||
| Linux on Power PC Kernel Settings | NA | Not Available | SEMMSL 250 SEMMNS 32000 SEMMNI 128 SEMOPM 100 SHMMAX RAM times 0.5 (Note 567506.1) SHMMNI 4096 SHMALL = SHMMAX/pagesize (note:301830.1) FILE-MAX 65536 IP_LOCAL_PORT_RANGE 9000 65500 RMEM_DEFAULT 262144 RMEM_MAX 2097152 WMEM_DEFAULT 262144 WMEM_MAX 262144 | |||||||||
| Oracle Version | 11.2 | 11.1 | 10.2 | 10.1 | ||||||||
| Mac OS X | NA | Not Available | Mac OS X Server 10.5.4 (Intel x86-64) Note: Only 10.2.0.4 is available and certified | Mac OS X Server 10.4(PowerPC) Mac OS X Server 10.3.9(PowerPC) Mac OS X Server 10.3.6(PowerPC) | ||||||||
| Mac OS X Disk Space | NA | Not Available | 1.2GB (optional pre-configured database) 1.5GB to 3.5GB (software, depending on installation type) | 1.2G Database 1G Software 1G Companion 150M-1G Client | ||||||||
| Mac OS X RAM | NA | Not Available | 1GB or more | 512Mb 256Mb(Client/Compan) | ||||||||
| Mac OS X swap | NA | Not Available | Equal to RAM (or more) | 1Gb or match RAM 512Mb(Client/Compan) | ||||||||
| Mac OS X tmp | NA | Not Available | 400Mb | 400Mb | ||||||||
| Mac OS X JDK | NA | Not Available | JDK 1.4.2_16 or higher | JDK 1.4.2_05 needs to be already installed Do this command to verify: $ /Library/Java/Home/bin/java -version | ||||||||
| Mac OS X Patches/ Packages | NA | Not Available | Xcode 3.0 or later GNU C compiler (gcc) version 4.0.1 or later (this version of gcc is included in Xcode 3.0 or later) JDK 1.4.2_16 or higher (with the JNDI extension if you want to use the Oracle JDBC/OCI drivers) | Required Packages:
| ||||||||
| Mac OS X Kernel Settings | NA | Not Available | Following are the recommended kernel parameters: kern.sysv.semmsl 87381 kern.sysv.semmns 87381 kern.sysv.semmni 87381 kern.sysv.semmnu 87381 kern.sysv.semume 10 kern.sysv.shmall 2097152 kern.sysv.shmmax Half the size of physical memory (in bytes) kern.sysv.shmmni 4096 kern.maxfiles 65536 kern.maxfilesperproc 65536 net.inet.ip.portrange.first 1024 net.inet.ip.portrange.last 65000 kern.corefile core kern.maxproc 2068 kern.maxprocperuid 2068 To improve the performance of the software on Mac OS X systems, you must increase the following shell limits: | Note: If you need Mac OS X Server 10.3.6, please go to here: To obtain Mac OS X Server 10.3.9 and the software update, send an email message to oracle_update_request@iservices.apple.com . You will receive an automatic response that contains links to the required patch and to the Mac OS X Server 10.3.9 installation software. To install Oracle 10.1.0.5 on MACOSX 10.4 (Tiger OS) PowerPC based systems : Following are the recommended kernel parameters: kern.corefile core To improve the performance of the software on Mac OS X systems, you must increase the following shell limits: | ||||||||
| Oracle Version | 11.2 | 11.1 | 10.2 | 10.1 | 9.2.0 | 9.0.1 | 8.1.7 | 8.1.6 | 8.1.5 | 8.0.6 | 8.0.5 |
853
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
