DA9034驱动程序阅读笔记(6)

转载时请注明出处和作者联系方式
文章出处：http://www.limodev.cn/blog
作者联系方式：李先静 <xianjimli at hotmail dot com>

DA9034是一个集成了电源管理、音频设备、触摸屏控制器和能用A/D|D/A转换的多功能芯片。最近读了一下相关驱动程序，这里记些笔记，不成体系，作为备忘而已。有兴趣的朋友可以一起讨论。

电源驱动主要是为用户空间提供一些接口，让用户空间可以查询相应的状态，比如是否在充电，以及电池的电量等。

电源设备是一个platform device，在littleton.c中定义：

static struct platform_device micco_power_device = {
.name = "micco-power",
.id = -1,
.dev = {
.platform_data = &power_pdata,
},
};

电源驱动程序在drivers/power/micco_power.c里：

static struct platform_driver micco_power_pdrv = {
.driver = {
.name = "micco-power",
},
.probe = micco_power_probe,
.remove = micco_power_remove,
.suspend = micco_power_suspend,
.resume = micco_power_resume,
};

在micco_power_probe函数里：

创建了两个timer:

setup_timer(&charger_timer, charger_timer_func, 0);
setup_timer(&supply_timer, supply_timer_func, 0);

charger_timer_func主要功能是更新充电状态，由于power_pdata里的回调函数都是空的，所以其实什么也没有做。

struct pda_power_pdata {
int (*init)(struct device *dev);
int (*is_ac_online)(void);
int (*is_usb_online)(void);
void (*set_charge)(int flags);
void (*exit)(struct device *dev);

char **supplied_to;
size_t num_supplicants;

unsigned int wait_for_status; /* msecs, default is 500 */
unsigned int wait_for_charger; /* msecs, default is 500 */
unsigned int polling_interval; /* msecs, default is 2000 */
};

static struct pda_power_pdata power_pdata = {
.polling_interval = 1000,
};

supply_timer_func主要功能是更新供电状态，最终会调用函数power_supply_changed_work：
由于external_power_changed是空的，所以power_supply_changed_work只做了两件事，一是更新充电指示灯，二是上报uevent通知用户空间。

static void power_supply_changed_work(struct work_struct *work)
{
struct power_supply *psy = container_of(work, struct power_supply,
changed_work);

dev_dbg(psy->dev, "%s/n", __func__);

class_for_each_device(power_supply_class, NULL, psy,
__power_supply_changed_work);

power_supply_update_leds(psy);

kobject_uevent(&psy->dev->kobj, KOBJ_CHANGE);
}

接下来注册了几个power supply:充电器、USB和电池：

/* register ac power supply */
ret = power_supply_register(power_dev, &micco_psy_ac);
if (ret) {
dev_err(power_dev, "failed to register %s power supply/n",
micco_psy_ac.name);
goto ac_supply_failed;
}

/* register usb power supply */
ret = power_supply_register(power_dev, &micco_psy_usb);
if (ret) {
dev_err(power_dev, "failed to register %s power supply/n",
micco_psy_usb.name);
goto usb_supply_failed;
}

/* register battery power supply */
ret = power_supply_register(power_dev, &micco_bat);
if (ret) {
dev_err(power_dev, "failed to register %s power supply/n",
micco_bat.name);
goto battery_supply_failed;
}

最后打开充设备：

ret = micco_charger_open();

现在看下充电器的supply:

只有一个“是否插上”的属性：

static enum power_supply_property micco_power_props[] = {
POWER_SUPPLY_PROP_ONLINE,
};

可以用来给主电池和备用电池充电：

static char *micco_power_supplied_to[] = {
"main-battery",
"backup-battery",
};

配置信息。

static struct power_supply micco_psy_ac = {
.name = "ac",
.type = POWER_SUPPLY_TYPE_MAINS,
.supplied_to = micco_power_supplied_to,
.num_supplicants = ARRAY_SIZE(micco_power_supplied_to),
.properties = micco_power_props,
.num_properties = ARRAY_SIZE(micco_power_props),
.get_property = micco_power_get_property,
};

USB的supply:其配置和充电器基本一样：
只有一个“是否插上”的属性：

static enum power_supply_property micco_power_props[] = {
POWER_SUPPLY_PROP_ONLINE,
};

可以用来给主电池和备用电池充电：

static char *micco_power_supplied_to[] = {
"main-battery",
"backup-battery",
};

static struct power_supply micco_psy_usb = {
.name = "usb",
.type = POWER_SUPPLY_TYPE_USB,
.supplied_to = micco_power_supplied_to,
.num_supplicants = ARRAY_SIZE(micco_power_supplied_to),
.properties = micco_power_props,
.num_properties = ARRAY_SIZE(micco_power_props),
.get_property = micco_power_get_property,
};

电池supply:
属性很多：

static enum power_supply_property micco_bat_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_TECHNOLOGY,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_VOLTAGE_AVG,
POWER_SUPPLY_PROP_CURRENT_AVG,
POWER_SUPPLY_PROP_CAPACITY,
POWER_SUPPLY_PROP_TEMP,
POWER_SUPPLY_PROP_TEMP_AMBIENT,
POWER_SUPPLY_PROP_MANUFACTURER,
POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
};

static struct power_supply micco_bat = {
.name = "battery",
.type = POWER_SUPPLY_TYPE_BATTERY,
.properties = micco_bat_props,
.num_properties = ARRAY_SIZE(micco_bat_props),
.get_property = micco_bat_get_property,
.use_for_apm = 1,
};