by Pete Finnigan last updated July 22, 2003 |
IntroductionLast year I wrote a two-part paper about SQL Injection and Oracle. That paper explored which SQL injection techniques are possible with Oracle, gave some simple examples on how SQL injection works and some suggestions on how to prevent attackers and malicious employees using these methods. Those SQL Injection papers can be found here: This paper takes the subject further and investigates the possibilities for the Oracle Database Administrator (DBA) to detect SQL injection in the wild against her Oracle database. Is it possible to detect SQL injection happening? If so what tools and techniques can be employed to achieve this? The main focus of this paper is to explore some simple techniques in extracting logging and trace data that could be employed for monitoring. The aim is to show the reader what data is readily available so they can make their own mind up about what can be useful. The paper will not cover commercial solutions. Because a true SQL injection tool would involve writing a parser or filter to analyse the SQL statements a fully featured tool is unfortunately beyond the scope of a short paper - I leave the implementation of such a tool to interested readers. Example code given in this paper can be obtained from http://www.petefinnigan.com/sql.htm. Can SQL Injection be detected?The short answer is definitely yes... err... well err... probably... that is, yes it is possible to detect SQL injection but probably not all of the time for all cases and not always in real time. The reasons for this are many and complicated:
It is possible to detect SQL injection attempts in general and specifically against Oracle. How can we do this, and what data is available? This paper attempts to explore these questions. The first step is to define the boundary conditions, or what actions are to be detected and then to look at the possible free solutions within Oracle and how these can be used to good effect. Some possible commercial solutionsThere are no real commercial solutions that specifically detect SQL injection attempts against an Oracle database. There are a reasonable number of firewall products that incorporate an Oracle proxy and a few IDS tools that claim to support Oracle. A number of companies are at present seriously looking into the design and development of a true application IDS for Oracle, and perhaps these tools will detect SQL injection. At present most of the commercial tools to be used properly would need rules and signatures to be defined for the specific Oracle cases. Some free solutionsThe ideal list of all possible SQL injection types or signatures is impossible to define in totality but a good starting point would cover the following possibilities:
The key is to keep it simple at first; trying to do something too complicated with ad-hoc and built in tools will never work efficiently and effectively. It is important to not get too clever with SQL and the assumptions about what is legal SQL and what is hacker-created SQL. Beware of the false positives. Keep it simple and be proactive - use more than one method if possible and extend and learn. Any tool or system employed to detect SQL injection could identify most of the above list of possibilities. In trying to identify where the data can come from to analyse SQL, the following steps should be possible for one or more of the techniques:
Concentrating on grabbing the SQL and whether it is possible to get timestamp and user info as well as possible further analysis leads to the following list of possibilities:
There are some issues to be aware of. The audit facilities can rarely be used for more than a smoking gun. If Oracle advanced options are used to encrypt network traffic then extracting the SQL from the network will be difficult. If trace facilities are used they tend to generate huge amounts of data and consume system resources. Any method that does not allow the detection of select statements whilst trapping others is really not useful. If it is not possible to detect SQL injection taking place in real time, it is better to know after the fact than to not know it is happening at all. Worked examplesNext we can work through some simple examples of a SQL injection attempt using one of the examples from my previous papers. The first step is to create the sample customer table, add data, and also create the demonstration procedure get_cust. An example SQL injection attempt that will be used below to see if it is detected is: SQL> exec get_cust('x'' union select username from all_users where ''x''=''x'); debug:select customer_phone from customers where customer_surname='x' union select username from all_users where 'x'='x' ::AURORA$JIS$UTILITY$ ::AURORA$ORB$UNAUTHENTICATED ::CTXSYS ::DBSNMP ::EMIL ::FRED Let us now explore what trace, packet, audit and internal information is available that records any evidence of running this query. Log Miner Oracle provides two database package procedures DBMS_LOGMNR and DBMS_LOGMNR_D that allow archive logs and on-line redo logs to be analysed. The redo logs contain all the information to replay every action in the database. These are used for point in time recovery and for transaction and data consistency. However there are some serious problems with the Log Miner functionality. These can be listed as follows:
Some advantages of Log Miner are:
Also, to make the use of this tool realistic the database has to be in ARCHIVELOGMODE and transaction_auditing needs to be true in the initialisation file for user information to be included. This is a very effective tool for after the fact analysis and forensics to find out exactly when some event occurred within the database and who did it. It can be used successfully to help recover, for instance, a table deleted by accident. Redo logs can also be analysed by hand the hard way. A good paper demonstrating this can be found here (PDF). Now we can run through the example and explore the contents of the archive logs. First check if the database is in ARCHIVELOGMODE, determine where the archive logs are written to, and finally that username auditing is on. SQL> select log_mode from v$database; LOG_MODE ------------ ARCHIVELOG SQL> select name,value from v$parameter 2 where name in('log_archive_start','log_archive_dest'); NAME ---------------------------------------------------------------- VALUE -------------------------------------------------------------------------------- log_archive_start TRUE log_archive_dest /export/home/u01/app/oracle/admin/emil/archive To detect which user executed a command: SQL> select name,value from v$parameter 2 where name = 'transaction_auditing'; NAME ---------------------------------------------------------------- VALUE -------------------------------------------------------------------------------- transaction_auditing TRUE Now execute the SQL injection attempt and then use Log Miner to see what is recorded. To make the analysis easier for this example, the archive log is saved before and after to ensure only this command is in the log: SQL> connect sys as sysdba Enter password: Connected. SQL> alter system archive log current; System altered. SQL> SQL> connect dbsnmp/dbsnmp@emil Connected. SQL> set serveroutput on size 100000 SQL> exec get_cust('x'' union select username from all_users where ''x''=''x'); debug:select customer_phone from customers where customer_surname='x' union select username from all_users where 'x'='x' ::AURORA$JIS$UTILITY$ ::AURORA$ORB$UNAUTHENTICATED ::CTXSYS ::DBSNMP ::EMIL <records snipped> ::SYS ::SYSTEM ::WKSYS ::ZULIA PL/SQL procedure successfully completed. SQL> connect sys as sysdba Enter password: Connected. SQL> alter system archive log current; System altered. SQL> First create the Log Miner dictionary: SQL> set serveroutput on size 1000000 SQL> exec dbms_logmnr_d.build('logmnr.dat','/tmp'); LogMnr Dictionary Procedure started LogMnr Dictionary File Opened TABLE: OBJ$ recorded in LogMnr Dictionary File TABLE: TAB$ recorded in LogMnr Dictionary File TABLE: COL$ recorded in LogMnr Dictionary File TABLE: TS$ recorded in LogMnr Dictionary File <output snipped> Procedure executed successfully - LogMnr Dictionary Created PL/SQL procedure successfully completed. SQL> Find the correct archive log file: SQL> select name 2 from v$archived_log 3 where completion_time=(select max(completion_time) from v$archived_log); NAME -------------------------------------------------------------------------------- /export/home/u01/app/oracle/admin/emil/archive/1_7.dbf SQL> Now load the archive log file into Log Miner: SQL> exec dbms_logmnr.add_logfile('/export/home/u01/app/oracle/admin/emil/archive/1_7.dbf',sys.dbms_logmnr.NEW); PL/SQL procedure successfully completed. SQL> exec dbms_logmnr.start_logmnr(dictFileName => '/tmp/logmnr.dat'); PL/SQL procedure successfully completed. SQL> Finally, search the results: SQL> select scn,username,timestamp,sql_redo 2 from v$logmnr_contents SQL> <snipped> SCN USERNAME TIMESTAMP SQL_REDO ---------- --------------- --------- ------------------------------ 253533 DBSNMP 16-JUN-03 set transaction read write; 253533 DBSNMP 16-JUN-03 update "SYS"."AUD$" set "ACTION#" = '101', "RETURNCODE" = '0', "LOGOFF$LREAD" = '228', "LOGOFF$PREAD" = '0', "LOGOFF$LWRITE" = '10', "LOGOFF$DEAD" = '0', "LOGOFF$TIME" = TO_DATE('16-JUN-2003 12:16:12', 'DD-MON-YYYY SCN USERNAME TIMESTAMP SQL_REDO ---------- --------------- --------- ------------------------------ HH24:MI:SS'), "SESSIONCPU" = '5' where "ACTION#" = '100' and "RETURNCODE" = '0' and "LOGOFF$LREAD" IS NULL and "LOGOFF$PREAD" IS NULL and "LOGOFF$LWRITE" IS NULL and "LOGOFF$DEAD" IS NULL and "LOGOFF$TIME" IS NULL and "SESSIONCPU" IS NULL and ROWID = 'AAAABiAABAAAAEWAAX'; SCN USERNAME TIMESTAMP SQL_REDO ---------- --------------- --------- ------------------------------ 253534 DBSNMP 16-JUN-03 commit; <snipped output> The first thing that can be noticed is that Log Miner does not process select statements and display the output in 9i. The Log Miner package doesn't support selects as they are not stored in the redo logs. It is possible to use Log Miner to read on-line redo logs but I will leave that to the reader to experiment with. Even though SQL injection can be detected in insert, delete and update statements, Log Miner is not suitable for detecting SQL injection. This is due to its lack of being able to detect select statements as well as some of the other issues mentioned above. Packet sniffing The main issue with packet sniffing for connections to the Oracle database is that the Oracle network protocol is proprietary and not published. Does that matter for trying to ascertain if SQL injection attempts have taken place? Probably yes, as access to the protocol would allow a better design and efficient tool for this task. Without access to the protocol and no wish to reverse engineer it, the task is limited to grabbing ASCII text strings from the wire. There are both advantages and disadvantages with this method: Advantages:
Disadvantages:
To demonstrate, we will use snoop on Solaris to see what is visible within network packets. Start up snoop and fire the SQL from a SQL*Plus session: root:jupiter> snoop -t a -x 0 jupiter and port 1521 | strings Using device /dev/hme (promiscuous mode) 15:06:34.31348 172.16.240.3 -> jupiter TCP D=1521 S=1404 Ack=299902194 Seq=26460609 Len=174 Win=8413 0: 0800 2092 9d88 00a0 ccd3 a550 0800 4500 .. ........P..E. 16: 00d6 6884 4000 8006 596d ac10 f003 ac10 ..h.@...Ym...... 32: f00b 057c 05f1 0193 c1c1 11e0 24f2 5018 ...|........$.P. 48: 20dd 0f36 0000 00ae 0000 0600 0000 0000 ..6............ 64: 1169 36a4 61de 0001 0101 0303 5e37 0304 .i6.a.......^7.. 80: 0021 0078 71de 0001 52bc 39de 0001 0a00 .!.xq...R.9..... 96: 0000 00e0 39de 0000 0101 0000 0000 0000 ....9........... 112: 0000 0000 0000 0000 0000 0000 0000 0000 ................ 128: e239 de00 4245 4749 4e20 6765 745f 6375 .9..BEGIN get_cu 144: 7374 2827 7827 2720 756e 696f 6e20 7365 st('x'' union se 160: 6c65 6374 2075 7365 726e 616d 6520 6672 lect username fr 176: 6f6d 2061 6c6c 5f75 7365 7273 2077 6865 om all_users whe 192: 7265 2027 2778 2727 3d27 2778 2729 3b20 re ''x''=''x'); 208: 454e 443b 0a00 0101 0101 0000 0000 0001 END;............ 224: 0800 0105 .... 15:06:34.33281 jupiter -> 172.16.240.3 TCP D=1404 S=1521 Ack=26460783 Seq=299902194 Len=54 Win=24820 0: 00a0 ccd3 a550 0800 2092 9d88 0800 4500 .....P.. .....E. 16: 005e 094a 4000 4006 f91f ac10 f00b ac10 .^.J@.@......... 32: f003 05f1 057c 11e0 24f2 0193 c26f 5018 .....|..$....oP. An immediate success with this method is apparent, because the SQL is captured with the SQL injection attempt in it. As with other methods in this article, to take this further a few things would need to be done:
As a simple solution, packet sniffing would appear to be an option provided a reasonably simple filter/parser program can be written in Perl or C. The goal would be to output the possible wrongdoing by extracting the SQL, timestamp and src and dest IP from the packet stream. Sniffing packets within oracle (sqlnet trace) Extracting network information closer to Oracle is possible by using the trace facility of SQL*Net, Net*8 or Oracle networking (whichever name is relevant to your database release). Trace facilities are available for most of the Oracle networking tools such as the listener, Oracle names, connection manager, names control utility and of course the Oracle networking client and server. In this example we can concentrate on the server trace. It is possible to trace from the client end but it would be necessary to do so for all clients and thus harder to manage. There are some disadvantages to using Oracle networking trace files as a tool to look for SQL injection:
To enable trace simply add the following lines to the $ORACLE_HOME/network/admin/sqlnet.ora file: TRACE_FILE_SERVER=pf_trace.trc TRACE_DIRECTORY_SERVER=/tmp TRACE_LEVEL_SERVER=SUPPORT The parameters define where the trace is to be written, what it is called and also the level. There are four levels that can be used: OFF, USER, ADMIN and SUPPORT. They rise in detail from OFF to SUPPORT; the SUPPORT level includes the contents of the network packets. Let's run our example again from SQL*Plus on a Windows client and see what is generated in the trace file. The trace file is as expected, pf_trace_616.trc. Wow, this file is 4005 lines in length just from connecting and executing the following: SQL> exec get_cust('x'' union select username from all_users where ''x''=''x'); PL/SQL procedure successfully completed. Searching in the trace for the packet dump we can find the SQL injection attempt sent to the database: nsprecv: 165 bytes from transport nsprecv: tlen=165, plen=165, type=6 nsprecv: packet dump nsprecv: 00 A5 00 00 06 00 00 00 |........| nsprecv: 00 00 03 5E 35 03 04 00 |...^5...| nsprecv: 21 00 78 71 DE 00 01 52 |!.xq...R| nsprecv: BC 39 DE 00 01 0A 00 00 |.9......| nsprecv: 00 00 E0 39 DE 00 00 01 |...9....| nsprecv: 01 00 00 00 00 00 00 00 |........| nsprecv: 00 00 00 00 00 00 00 00 |........| nsprecv: 00 00 00 00 00 00 00 E2 |........| nsprecv: 39 DE 00 42 45 47 49 4E |9..BEGIN| nsprecv: 20 67 65 74 5F 63 75 73 | get_cus| nsprecv: 74 28 27 78 27 27 20 75 |t('x'' u| nsprecv: 6E 69 6F 6E 20 73 65 6C |nion sel| nsprecv: 65 63 74 20 75 73 65 72 |ect user| nsprecv: 6E 61 6D 65 20 66 72 6F |name fro| nsprecv: 6D 20 61 6C 6C 5F 75 73 |m all_us| nsprecv: 65 72 73 20 77 68 65 72 |ers wher| nsprecv: 65 20 27 27 78 27 27 3D |e ''x''=| nsprecv: 27 27 78 27 29 3B 20 45 |''x'); E| nsprecv: 4E 44 3B 0A 00 01 01 01 |ND;.....| Whilst using SQL*Net trace files are a possibility, there are a number of issues besides the items listed above:
This method is not practical for implementing a simple SQL injection utility in an organisation. The resource issues alone would make it difficult to manage and work with. It could be used sparingly when a suspected incident has occurred and where trace usage could be controlled to a narrow time band or number of clients. Internal Oracle trace files Oracle can also generate trace files from the Oracle kernel when SQL is executed. This can be enabled at the RDBMS level by setting the initialisation parameter SQL_TRACE=true in the init.ora file. It can also be turned on just for the instance by doing: ALTER SYSTEM SET SQL_TRACE=TRUE; Trace can also be turned on for the current session with: ALTER SESSION SET SQL_TRACE=TRUE; Before trace is turned on the parameter timed_statistics should be set to TRUE in the initialisation file. Trace files will be written to the file pointed at by the user_dump_dest parameter in the initialisation file. Let's create a trace file and analyse it for our simple SQL injection example as follows: SQL> alter session set sql_trace=true; Session altered. SQL> exec get_cust('x'' union select username from all_users where ''x''=''x'); PL/SQL procedure successfully completed. SQL> A trace file has been created with a name format of {SID}_ora_{PID).trc. The format is platform specific. The PID is the OS PID as for the SQL*Net trace file and again it can be determined from querying the views v$session and v$process. The raw trace file can be read and the SQL in question can be seen as follows: *** 2003-06-16 16:54:01.429 *** SESSION ID:(8.29) 2003-06-16 16:54:01.408 APPNAME mod='SQL*Plus' mh=3669949024 act='' ah=4029777240 ===================== PARSING IN CURSOR #3 len=33 dep=0 uid=17 oct=42 lid=17 tim=1055782441429190 hv=3 732290820 ad='846c85c0' alter session set sql_trace=true END OF STMT EXEC #3:c=0,e=1,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=4,tim=1055782441407935 *** 2003-06-16 16:54:34.876 ===================== PARSING IN CURSOR #3 len=82 dep=0 uid=17 oct=47 lid=17 tim=1055782474876639 hv=3 204430447 ad='8482555c' BEGIN get_cust('x'' union select username from all_users where ''x''=''x'); END; END OF STMT PARSE #3:c=0,e=6430,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=4,tim=1055782474876611 ===================== A better way is to post process the trace file with a utility called tkprof as follows: oracle:jupiter> tkprof emil_ora_616.trc output.trc sys=yes TKPROF: Release 9.0.1.0.0 - Production on Mon Jun 16 16:59:50 2003 (c) Copyright 2001 Oracle Corporation. All rights reserved. The generated file contains quite a lot of information, including timing and user ID. The timing would need to be read from the raw trace file but the user ID can be found from the tkprof output. The processed output shows the PL/SQL package being called and also the dynamic SQL string: <output snipped> BEGIN get_cust('x'' union select username from all_users where ''x''=''x'); END; call count cpu elapsed disk query current rows ------- ------ -------- ---------- ---------- ---------- ---------- ---------- Parse 1 0.00 0.00 0 0 0 0 Execute 1 0.00 0.00 0 0 0 1 Fetch 0 0.00 0.00 0 0 0 0 ------- ------ -------- ---------- ---------- ---------- ---------- ---------- total 2 0.00 0.01 0 0 0 1 Misses in library cache during parse: 1 Optimizer goal: CHOOSE Parsing user id: 17 <output snipped> select customer_phone from customers where customer_surname='x' union select username from all_users where 'x'='x' call count cpu elapsed disk query current rows ------- ------ -------- ---------- ---------- ---------- ---------- ---------- Parse 1 0.01 0.02 0 0 0 0 Execute 1 0.01 0.00 0 0 1 0 Fetch 37 0.01 0.00 0 184 5 36 ------- ------ -------- ---------- ---------- ---------- ---------- ---------- total 39 0.03 0.03 0 184 6 36 Misses in library cache during parse: 1 Optimizer goal: CHOOSE Parsing user id: 17 (recursive depth: 1) Rows Row Source Operation ------- --------------------------------------------------- 36 SORT UNIQUE 36 UNION-ALL <output snipped> The user ID can be read from the database as: SQL> select username,user_id 2 from dba_users 3 where user_id=17; USERNAME USER_ID ------------------------------ ---------- DBSNMP 17 SQL> Trace files clearly have promise for implementing a SQL injection detection system but they also have some serious problems:
The information in trace files is good and usable but the problems with managing the trace files and the performance issues with generating trace constantly would suggest this method might not be usable. Again, as with SQL*net these files can be used sparingly. Reading SQL from the System Global Area (SGA) This should be the most promising method to extract SQL and analyse if a SQL injection attempt has been made. The reasons is purely because this is the heart of the Oracle RDBMS, and all SQL and PL/SQL executed spends some time in the SQL area in the SGA. There are a couple of issues to be aware of with this, however. The first is that querying the SQL area can be resource intensive and could affect performance on a critical production system and secondly it could be possible to miss SQL that has been executed. If a database runs thousands of pieces of SQL and all are different and the memory allocated for the SQL area is not large, then little used SQL (once or twice) could be aged out of the area very quickly. Querying the SQL regularly is the key to monitoring for abuse. Too often this could affect performance and not often enough you could miss something. If an organisation were to use this method to check for abuse, start with checks maybe two or three times a day, monitor it and adjust as more is learnt. Once again, as with the other sources of information a filter or parser is really needed to analyse the SQL extracted to give some indication as to whether it is legal or not. Start with a basic script like the one below that just checks for the existence of a union in the SQL, filter out some users perhaps, save the results to a summary table using a create table as select statement and further filter for specific tables involved. A good first approximation would be to highlight any SQL issued by a non SYS user with a union that also accesses a table or view owned by sys. Our example queries the view all_users owned by sys. Here is a simple query that extracts the SQL from the SGA where there is a union included. This is to give the reader an idea of what data can be read. Further filtering can be done as described above. select a.address address, s.hash_value hash_value, s.piece piece, s.sql_text sql_text, u.username parsing_user_id, c.username parsing_schema_id from v$sqlarea a, v$sqltext_with_newlines s, dba_users u, dba_users c where a.address=s.address and a.hash_value=s.hash_value and a.parsing_user_id=u.user_id and a.parsing_schema_id=c.user_id and exists (select 'x' from v$sqltext_with_newlines x where x.address=a.address and x.hash_value=a.hash_value and upper(x.sql_text) like '%UNION%') order by 1,2,3 / Running this gives: <output snipped> QL_TEXT PARSING_USER_ID PARSING_SCHEMA_ ----------------------------------- --------------- --------------- and a.parsing_schema_id=c.user_id and upper(s .sql_text) like '%UNION%' SYSTEM SYSTEM order by 1,2,3 BEGIN dbsnmp.get_cust('x'' union SYS SYS select username from all_users where ''x''=''x'); END; SYS SYS select customer_phone from SYS SYS customers where customer_surname='x' union select username from SYS SYS all_users where 'x'='x' BEGIN get_cust('x'' union select DBSNMP DBSNMP username from all_users where ' 'x''=''x'); END; DBSNMP DBSNMP select SYS SYS tc.type#,tc.intcol#,tc.position#,c. type#, c.length,c.scal <output snipped> The example has been run as both the SYS user and DBSNMP user whilst this database has been up so it appears a number of times in the output. This method so far seems to be the simplest to use and offers probably the easiest way to implement a complete tool/script to analyse for SQL injection. It also has the least downside effects! Using Oracle audit The features available with standard Oracle audit are rich and varied but there are a number of problems with using it to detect SQL injection.
Irrespective of any of the other methods, audit should be used. It is a robust and useful system and can reap benefits when used to detect abuse. It is not easily possible to detect SQL injection with audit but rather to see the smoking gun. For instance if audit were enabled for select access on the tables dbsnmp.customers and sys.all_users then the audit trail should show entries when the SQL injection attempt as described in our example is used. We cannot definitely say a union was employed but access by DBSNMP to ALL_USERS should be visible. When a hacker is attempting to guess what SQL he can add to an existing string, how to add a union or sub-select, or adding comments to truncate, SQL errors can be generated when he gets it wrong. Again it is a smoking gun and detailed analysis of errors in the audit trail and other actions by the same user in the same session can indicate what was happening. Here is an example of using audit whilst the SQL injection example is run. First turn on audit on the ALL_USERS view and CUSTOMERS table. SQL> audit select on sys.all_users by access; Audit succeeded. SQL> audit select on dbsnmp.customers by access; Audit succeeded. Check the audit trail with the following SQL: col username for a8 col timestamp for a20 col action_name for a15 col obj_name for a10 col owner for a8 col sessionid for 999 col returncode for 999 select username, to_char(timestamp,'DD-MON-YYYY HH24:MI:SS') timestamp, action_name, obj_name, owner, sessionid, returncode from dba_audit_object order by timestamp; The results are: USERNAME TIMESTAMP ACTION_NAME OBJ_NAME OWNER SESSIONID RETURNCODE -------- -------------------- --------------- ---------- -------- --------- ---------- DBSNMP 16-JUN-2003 20:21:08 SELECT ALL_USERS SYS 227 0 DBSNMP 16-JUN-2003 20:21:08 SELECT CUSTOMERS DBSNMP 227 0 DBSNMP 16-JUN-2003 20:21:08 SELECT CUSTOMERS DBSNMP 227 0 This shows access to the ALL_USERS view and CUSTOMERS table by the user DBSNMP in the same session. It is simple also to write a piece of SQL to analyse errors in the audit trail. Audit can clearly be used to assist in detecting SQL injection but would require considerable effort to define "good" SQL queries and audit settings to reliably "guess" at SQL injection attempts. For more information see the previous article by this author about Oracle audit for a brief introduction to its use. Database triggers Database triggers are usually the next line of defence when Oracle's internal audit is used. The normal audit facilities operate at object level or privilege level and are not useful for determining what happened at the row level. Triggers can be used for this. To use them involves programming a trigger for each table and for each action such as insert, update or delete. The main failing with triggers is that they cannot be written to fire when a select takes place against a table or view. Extracting the actual SQL used to do the update, delete or insert is not possible. It is possible to create SQL that is used to alter the table the trigger fires on by reading before and after values for each row and creating the trigger to fire for each row. In view of these restrictions, database triggers are not really useful in the quest to find SQL injection attempts. Fine grained auditing With version 9i, Oracle introduced fine grained auditing (FGA). This functionality is based on internal triggers that fire every time an SQL statement is parsed. As with fine grained access control it is based on defining predicates to limit the SQL that will be audited. By using audit policies, auditing can be focused on a small subset of activities performed against a defined set of data. The one advantage that this functionality brings is the ability to finally monitor select statements at the row level. The standard handler function also captures SQL, so this looks like it could be a good tool to check for SQL injection. Indeed Oracle states in their on-line documentation for this package that it is an ideal tool to implement an IDS system with. However it remains to be seen as to whether anyone has successfully used this package and policies as a base for an IDS tool. Let's set up a simple policy and see if our example injection can be caught. The first requirement is that the tables with FGA set up against them need to have statistics generated by analysing. Also the cost-based optimiser must be used. There are a number of issues with FGA that cause the trigger to not fire correctly, for instance if a RULE hint is used in the SQL. First check the optimiser and analyse the sample table: SQL> analyze table dbsnmp.customers compute statistics; Table analyzed. SQL> select name,value from v$parameter 2 where name='optimizer_mode'; NAME ---------------------------------------------------------------- VALUE -------------------------------------------------------------------------------- optimizer_mode CHOOSE Next, create a policy that will execute every time a statement is run against the table (in this case DBSNMP.CUSTOMERS). 1 begin 2 dbms_fga.add_policy(object_schema=>'DBSNMP', 3 object_name=>'CUSTOMERS', 4 policy_name=>'SQL_INJECT', 5 audit_condition=>'1=1', 6 audit_column=>null, 7 handler_schema=>null, 8 handler_module=>null, 9 enable=>true); 10* end; SQL> / PL/SQL procedure successfully completed. SQL> Next, execute the SQL injection example and then check the audit trail for any entries: SQL> set serveroutput on size 100000 SQL> exec get_cust('x'' union select username from all_users where ''x''=''x'); debug:select customer_phone from customers where customer_surname='x' union select username from all_users where 'x'='x' ::AURORA$JIS$UTILITY$ ::AURORA$ORB$UNAUTHENTICATED ::CTXSYS ::DBSNMP ::EMIL <records snipped> ::SYS ::SYSTEM ::WKSYS ::ZULIA PL/SQL procedure successfully completed. SQL> col db_user for a15 SQL> col object_name for a20 SQL> col sql_text for a30 word_wrapped SQL> select db_user,timestamp,object_name,sql_text 2 from dba_fga_audit_trail 3 order by timestamp; DB_USER TIMESTAMP OBJECT_NAME SQL_TEXT --------------- --------- -------------------- ------------------------------ DBSNMP 16-JUN-03 CUSTOMERS select customer_phone from customers where customer_surname='x' union select username from all_users where 'x'='x' SQL> Okay, success. The dynamic SQL is shown including the union join to the ALL_USERS system table. The use of FGA would need to be expanded to every table in the application schema. Then reports would need to be written that returned only entries that violate some of the basic rules we defined at the beginning, such as SQL with a union in it or SQL with a line such as 'x'='x'. All of the policies could be easily generated using SQL such as: select 'exec dbms_fga.add_policy(object_schema=>'''||owner||''',object_name=>''' ||table_name||''',policy_name=>'''||table_name||''',audit_condition=>''1=1'',aud it_column=>null,handler_schema=>null,handler_module=>null,enable=>true);' from dba_tables where owner not in ('SYS','SYSTEM') / Of course the policies would probably need better names to avoid name clashes and it would be prudent to include some logic in a handler function to analyse the SQL for abuses. Protection is better than detectionSome solutions for protecting against SQL injection were given in the previous papers but for completeness a few of the main ideas are included here again:
ConclusionsSQL injection is a relatively new phenomenon and is being embraced by attackers with gusto. No figures are yet available to quantify how big the problem is for Oracle-based systems. At present more exposure in the press, technical sites and publications is given to other database products. I believe this is because it is slightly harder to SQL inject an Oracle database than other products. However, that doesn't mean there is not a problem with Oracle databases. The other reason there are no accurate figures is that most companies probably would not even know anyone is using SQL injection against their Oracle database. I hope that this paper has given some insight to the issue and some simple ideas for DBAs and security managers to monitor for this problem. As I have stated before, one simple solution is to not connect your Oracle database to the Internet (or intranet) if it is not necessary. Secondly, do not use dynamic SQL or PL/SQL and if you do, use bind variables. Also audit and secure the data with as much thought as possible to the OS and network security. The simple test cases above have shown that there are indeed a number of trails left in the database or network trace files when SQL injection is attempted. Therefore it should be possible for the DBA to use some of the above sources as a basis for a detection policy. Some of the methods such as trace files are clearly resource hogs. The fine grained audit and reading SQL from the SGA look like good candidates, as does the consistent use of audit. Of course, the best form of defence is to audit your database security and avoid dynamic SQL!! <!-- OAS --> |
![]()
References
About the author Pete Finnigan is the author of the recently published book "Oracle security step-by-step - A survival guide to Oracle security" published in January 2003 by the SANS Institute. Pete Finnigan is the founder and CTO of PeteFinnigan.com Limited a UK based company that specialises in auditing and securing Oracle databases for clients world wide.
Search SecurityFocus Show all SecurityFocus articles by Pete Finnigan. |
Detecting SQL Injection in Oracle-part one
最新推荐文章于 2023-11-28 20:15:00 发布