RAC 卸载 说明

今天本来是打算做RAC RMAN备份的实验的。可是有个问题一直没有解决，是之前安装RAC时遗留的。因为这个给操作带来了很多麻烦，所以决定先把这个问题了。

上次安装的时候没有注意顺序，结果是ASM2实例在RAC1节点上, ASM1在RAC2节点上。这样每次启动RAC环境的时候都会很麻烦。要解决这个问题只能先卸载数据库实例，在卸载ASM.在重新安装。在网上google搜了一下，整理如下，顺便做个实验，验证一下。

一．RAC删除数据库

This section explains how to delete a RAC database with the DBCA. This process deletes a database and removes a database's initialization parameter files, instances, OFA structure, and Oracle network configuration. However, this process does not remove datafiles if you placed the files on raw devices or on raw partitions.

Todelete a database with the DBCA:

1.Start the DBCA on one of the nodes:

The DBCA Welcome page appears.

2.Select Oracle Real Application Clusters and click Next.

After you click Next, the DBCA displays theOperations page.

3.Select Delete a database, click Next, and the DBCA displays theList of Cluster Databases page.

4.If your user ID and password are not operating-system authenticated, then the List of Cluster Databases page displays the user name and password fields. If these fields appear, then enter a user ID and password that has SYSDBA privileges.

5.Select the database to delete and click Finish.

After you click Finish, the DBCA displays adialog to confirm the database and instances that the DBCA is going to delete.

6.Click OK to begin the deletion of the database and its associated files, services, and environment settings, or click Cancel to stop the operation.

When you click OK, the DBCA continues the operation and deletes all of the associated instances for this database. The DBCA also removes the parameter files, password files, and oratab entries.

At this point, you have accomplished the following:

·Deleted the selected database from the cluster

·Deleted high availability services that were assigned to the database

·Deleted the Oracle Net configuration for the database

·Deleted the OFA directory structure from the cluster

·Deleted the datafiles if the datafiles were not on raw devices

二．ASM实例卸载

How to drop the ASM instance installed in a seperate Oracle Home for both RAC and non-RAC installations.

Solution

The outline of the steps involved are :
a) Backup all the ASM client database files stored on the diskgroups.
b) Dropping all the diskgroups.
c) Removing ASM resource from CRS (* RAC specific)
d) Removing ASM disk signature (In case of asmlib)
e) Remove the ASM pfile/spfile.
f) Removing ASM entry in the file oratab
g) Wipe out the disks header using dd

Following are the steps to be followed:
1) Log into the ASM instance and do'select * from v$asm_client;'

2) For each instance listed above, stop the respective databases.

3) Backup all the datafiles, logfiles, controlfiles, archive logs, etc. that are currently using ASM storage, to tape or to filesystem (using RMAN). This needs to be done for every database (ASM client) using ASM.

** NOTE: Please make sure you have the data secure before continuing to the next step.

4) Find all the diskgroups: 'select * from v$asm_diskgroup'

5) For each diskgroup listed above:

' drop diskgroup <name> including contents'

这里要注意的，要先在一个节点上将diskgroup dismount后，在另一个节点进行drop。不然会报：

ORA-15073: diskgroup DATA is mounted by another ASM instance

alter diskgroup<name>dismount;

6) Shutdown all(RAC nodes) ASM instances.

7) On RAC install verify that all asm instances are stopped

$ORA_CRS_HOME/bin/crst_stat |more<- look for ASM resources and make sure the target=offline

8) For single instance install run the following script:

$ORACLE_HOME/bin/localconfig delete

* This cleans up the CSSD configuration.

9) Invoke OUI, and now de-install the ASM Oracle home.

10) For RAC install, remove the asm related resource.

srvctl remove asm -n <nodename><- Peform for all nodes of a RAC cluster

crs_stat |more<- make sure no asm resources exists

如：srvctl remove asm –n rac1,如果删除不掉，就加上–f参数。

11) If using asmlib (on Linux only), then

a. oracleasm listdisks
b. oracleasm deletedisks (do this for every disk listed above)
c. oracleasm listdisks (to verify they have been deleted)
d. on other RAC nodes: oracleasm listdisks (to verify they have been deleted too)
e. On all nodes(RAC) :
As root run:
# /etc/init.d/oracleasm stop
# /etc/init.d/oracleasm disable

12) delete the ASM pfile or spfile

13) in the file /etc/oratab, remove the line relative to the ASM instance

14) clean out the disks headers using the dd command:

for example: dd if=/dev/zero of=/dev/<asm_disk_name> bs=1024k count=50

[root@rac2 ~]# dd if=/dev/zero of=/dev/sdd1 bs=1024k count=1

1+0 records in

1+0 records out

1048576 bytes (1.0 MB) copied, 0.026078 seconds, 40.2 MB/s

三.Clusterware安装失败情况下的卸载

How to Clean Up After a Failed 10g or 11.1 Oracle Clusterware Installation

10g and 11.1 RAC: How to Clean Up After a Failed CRS Install
------------------------------------------------------------
Not cleaning up a failed CRS install can cause problems like node reboots.
Follow these steps to clean up a failed CRS install:

1. Run the rootdelete.sh script then the rootdeinstall.sh script from the $ORA_CRS_HOME/install directory on any nodes you are removing CRS from.

Running these scripts should be sufficent to clean up your CRS install.Rootdelete.sh accepts options like nosharedvar/sharedvar, andnosharedhome/sharedhome. Make yourself familiar with these options by reading the Oracle Clusterware and Oracle Real Application Clusters Administration and Deployment Guide.If you have any problems with these scripts please open a service request.

If for some reason you have to manually remove the install due to problems with the scripts, continue to step 2:

2. Stop the Nodeapps on all nodes:

srvctl stop nodeapps -n

3. Prevent CRS from starting when the node boots.To do this issue the following as root:

Sun:

rm /etc/init.d/init.cssd

rm /etc/init.d/init.crs

rm /etc/init.d/init.crsd

rm /etc/init.d/init.evmd

rm /etc/rc3.d/K96init.crs

rm /etc/rc3.d/S96init.crs

rm -Rf /var/opt/oracle/scls_scr

rm -Rf /var/opt/oracle/oprocd

rm /etc/inittab.crs

cp /etc/inittab.orig /etc/inittab

Linux:

rm /etc/oracle/*

rm -f /etc/init.d/init.cssd

rm -f /etc/init.d/init.crs

rm -f /etc/init.d/init.crsd

rm -f /etc/init.d/init.evmd

rm -f /etc/rc2.d/K96init.crs

rm -f /etc/rc2.d/S96init.crs

rm -f /etc/rc3.d/K96init.crs

rm -f /etc/rc3.d/S96init.crs

rm -f /etc/rc5.d/K96init.crs

rm -f /etc/rc5.d/S96init.crs

rm -Rf /etc/oracle/scls_scr

rm -f /etc/inittab.crs

cp /etc/inittab.orig /etc/inittab

HP-UX:

rm /sbin/init.d/init.cssd

rm /sbin/init.d/init.crs

rm /sbin/init.d/init.crsd

rm /sbin/init.d/init.evmd

rm /sbin/rc2.d/K960init.crs

rm /sbin/rc2.d/K001init.crs

rm /sbin/rc3.d/K960init.crs

rm /sbin/rc3.d/S960init.crs

rm -Rf /var/opt/oracle/scls_scr

rm -Rf /var/opt/oracle/oprocd

rm /etc/inittab.crs

cp /etc/inittab.orig /etc/inittab

HP Tru64:

rm /sbin/init.d/init.cssd

rm /sbin/init.d/init.crs

rm /sbin/init.d/init.crsd

rm /sbin/init.d/init.evmd

rm /sbin/rc3.d/K96init.crs

rm /sbin/rc3.d/S96init.crs

rm -Rf /var/opt/oracle/scls_scr

rm -Rf /var/opt/oracle/oprocd

rm /etc/inittab.crs

cp /etc/inittab.orig /etc/inittab

IBM AIX:

rm /etc/init.cssd

rm /etc/init.crs

rm /etc/init.crsd

rm /etc/init.evmd

rm /etc/rc.d/rc2.d/K96init.crs

rm /etc/rc.d/rc2.d/S96init.crs

rm -Rf /etc/oracle/scls_scr

rm -Rf /etc/oracle/oprocd

rm /etc/inittab.crs

cp /etc/inittab.orig /etc/inittab

4. If they are not already down, kill off EVM, CRS, and CSS processes or reboot the node:

ps -ef | grep crs

kill

ps -ef | grep evm

kill

ps -ef | grep css

kill

Do not kill any OS processes, for example icssvr_daemon process !

5. If there is no other Oracle software running (like listeners, DB's, etc...),you can remove the files in /var/tmp/.oracle or /tmp/.oracle.Example:

rm -f /var/tmp/.oracle/*

or

rm -f /tmp/.oracle/*

6. Remove the ocr.loc Usually the ocr.loc can be found at /etc/oracle

7. De-install the CRS home in the Oracle Universal Installer

8. Remove the CRS install location.

9. Clean out the OCR and Voting Files with dd commands.Example:

dd if=/dev/zero of=/dev/rdsk/V1064_vote_01_20m.dbf bs=1M count=256
dd if=/dev/zero of=/dev/rdsk/ocrV1064_100m.ora bs=1M count=256

See the Clusterware Installation Guide for sizing requirements...

If you placed the OCR and voting disk on a shared filesystem, remove them.

If you are removing the RDBMS installation, also clean out any ASM disks if they have already been used.

10. The /tmp/CVU* dir should be cleaned also to avoid the cluvfy misreporting.

11. It is good practice to reboot the node before starting the next install.

12. If you would like to re-install CRS, follow the steps in the RAC Installation manual.

四．RAC卸载步骤

上面三个分别介绍了单独卸载的方法。现在来看一下，如何来卸载一个安装成功的RAC环境。

卸载步骤：

（1）删除数据库

（2）利用Netca工具删除监听设置

（3）删除Oracle软件

（4）用CLUSTER目录下提供的shell来清除CLUSTER系统的所有修改

（5）清除OCR中的信息

（6）卸载ClusterWare

4.1删除数据库

为了更好的卸载数据库，最好是保证数据库处于打开状态，这样DBCA就可以根据读取Oracle数据文件的信息并进行删除。启动DBCA图形界面，选择Oracle Real Application Cluster database选择。选择Delete a Databasese。然后选择FINISH，删除整个数据库文件。

操作方法和第一节一样.

4.2利用NETCA工具删除监听设置。

4.3删除Oracle软件

进入$ORACLE_HOME/oui/bin/目录，运行runInstaller命令。进入WELCOME界面后，直接点击Installed Products，这时会弹出一个对话框，在Oracle Homes中有两个对象：OraCrs10g_home和OraDb10g_home。

在删除的时候一定要先选择卸载OraDb10g_home，因为还需要运行Cluster目录下的shell脚本来清除CLUSTER对操作系统进行的修改，所以OraCrs10g_home的卸载放到后面的步骤中进行。

选中OraDb11g_home点击REMOVE即可进行卸载。

4.4用CLUSTER目录下提供的shell来清除CLUSTER系统的所有修改

用root用户执行如下脚本：

on local node:
$ORA_CRS_HOME/install/rootdelete.sh local nosharedvar nosharedhome

on remote nodes:
$ORA_CRS_HOME/install/rootdelete.sh remote nosharedvar nosharedhome

执行时，可以加上-force参数。

注意：这里的操作必须一个节点一个节点的执行，不能并行操作，就如同安装的时候执行root.sh一样！

在rac1节点执行：

[root@rac1 ~]#cd /u01/app/oracle/product/crs/install

[root@rac1 install]#./rootdelete.sh local nosharedvar nosharedhome

CRS-0210: Could not find resource 'ora.rac1.LISTENER_RAC1.lsnr'.

Shutting down Oracle Cluster Ready Services (CRS):

Sep 17 13:27:28.917 | INF | daemon shutting down

Stopping resources. This could take several minutes.

Successfully stopped CRS resources.

Stopping CSSD.

Shutting down CSS daemon.

Shutdown request successfully issued.

Shutdown has begun. The daemons should exit soon.

Checking to see if Oracle CRS stack is down...

Oracle CRS stack is not running.

Oracle CRS stack is down now.

Removing script for Oracle Cluster Ready services

Updating ocr file for downgrade

Cleaning up SCR settings in '/etc/oracle/scls_scr'

在rac2节点执行：

[root@rac2 ~]#cd /u01/app/oracle/product/crs/install

[root@rac2 install]#./rootdelete.sh remote nosharedvar nosharedhome

CRS-0210: Could not find resource 'ora.rac2.LISTENER_RAC2.lsnr'.

Shutting down Oracle Cluster Ready Services (CRS):

Sep 17 13:29:48.144 | INF | daemon shutting down

Stopping resources. This could take several minutes.

Successfully stopped CRS resources.

Stopping CSSD.

Shutting down CSS daemon.

Shutdown request successfully issued.

Shutdown has begun. The daemons should exit soon.

Checking to see if Oracle CRS stack is down...

Oracle CRS stack is not running.

Oracle CRS stack is down now.

Removing script for Oracle Cluster Ready services

Updating ocr file for downgrade

Cleaning up SCR settings in '/etc/oracle/scls_scr'

4.5清除OCR

只需要用root用户在本地节点执行如下命令：

$ORA_CRS_HOME/install/rootdeinstall.sh

在一个节点执行即可：

[root@rac1 install]#./rootdeinstall.sh

Removing contents from OCR mirror device

2560+0 records in

2560+0 records out

10485760 bytes (10 MB) copied, 0.774432 seconds, 13.5 MB/s

Removing contents from OCR device

2560+0 records in

2560+0 records out

10485760 bytes (10 MB) copied, 1.36228 seconds, 7.7 MB/s

4.6卸载clusterware

进入$ORA_CRS_HOME/oui/bin/目录，运行runInstaller命令.进入WELCOME界面后，点击Installed Products，在弹出的对话框中选择OraCrs10g_home，然后点击REMOVE。

删除/var/opt目录下的Oracle信息和ORACLE_BASE目录:

# rm -rf /data/oracle

# rm -rf /var/opt/oracle

删除/usr/local/bin目录下的设置：

# rm /usr/local/bin/dbhome

# rm /usr/local/bin/oraenv

# rm /usr/local/bin/coraenv

利用操作系统命令检查一下，系统中是否还残留一些Oracle的设置：

# find / -name oracle

整个Oracle数据库和RAC环境清除工作至此结束，可以重新进行Clusterware和RAC的安装了。这里没有对几个raw设备进行，因为在安装Clusterware的时候，会自动对他们进行格式化。

------------------------------------------------------------------------------