vi /etc/network/interfaces
会显示如下:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 207.210.118.56
netmask 255.255.255.224
broadcast 207.210.118.63
network 207.210.118.32
gateway 207.210.118.33
添加新行
auto eth0:1
在这行下面
auto eth0
添加新的interface信息
iface eth0:1 inet static
address 207.210.118.58
netmask 255.255.255.224
broadcast 207.210.118.63
network 207.210.118.32
gateway 207.210.118.33
检查MASK和网关是否正确
添加完毕, 会显示如下
auto lo
iface lo inet loopback
auto eth0
auto eth0:1
iface eth0 inet static
address 207.210.118.56
netmask 255.255.255.224
broadcast 207.210.118.63
network 207.210.118.32
gateway 207.210.118.33
iface eth0:1 inet static
address 207.210.118.58
netmask 255.255.255.224
broadcast 207.210.118.63
network 207.210.118.32
gateway 207.210.118.33
之后重启网络
/etc/init.d/networking restart