AIX环境DB2性能诊断脚本

#!/bin/ksh

if [ $# -eq 0 ] ; then
echo "Usage: db2service.perf1 <database1> <database2> ..."
exit
fi

sleep 5
echo ""
echo "You have 10 seconds to cancel this script with Ctrl-C"
sleep 10

#Check for MLN
if test -z "$DB2SERVICENODES" ; then
MLN=0
DB2SERVICENODES="X"
else
MLN=1
fi

mkdir OSCONFIG >> db2service.log 2>&1
mkdir DB2CONFIG >> db2service.log 2>&1
mkdir OSSNAPS >> db2service.log 2>&1
mkdir DB2SNAPS >> db2service.log 2>&1
mkdir OSTRACE >> db2service.log 2>&1
mkdir DB2TRACE >> db2service.log 2>&1
mkdir DB2PD >> db2service.log 2>&1

tarupfiles()
{
tar -cvf db2service.out.tar DB2CONFIG DB2SNAPS DB2TRACE OSCONFIG \
OSSNAPS OSTRACE DB2PD db2service.* >> db2service.log 2>&1
if [ $? -eq 0 ] ; then
echo "removing directories... "
rm -Rf OSCONFIG DB2CONFIG OSSNAPS DB2SNAPS OSTRACE DB2TRACE DB2PD
fi
datestamp=`date +"%m%d"`.`date +"%H%M"`
mv db2service.out.tar db2service.$datestamp.tar
compress db2service.$datestamp.tar
echo "output files have been tarred and compressed into db2service.$datestamp.tar.Z" `date` | tee -a db2service.log
echo ""
echo "Please place this file into your Diagnostic directory"
echo " DIAGPATH - <instance_home>/sqllib/db2dump by default"
echo "tar and compress the entire diagnostic directory into <Your PMR number>.tar.Z"
echo "NOTE: it may be necessary to add additional characters after <Your PMR number>"
echo " for uniqueness when ftping the file to ECUREP"
echo ""
echo "Please ftp the file to ftp.emea.ibm.com"
echo "Login as anonymous, password is your email address"
echo "Upload <Your PMR number>.tar.Z into /toibm/im in binary format"
echo ""
echo "Please notify the service analyst handling the PMR once the file"
echo " has been successfully uploaded"
echo "Thank you"
echo ""
}

trap "echo Please allow a few minutes for cleanup ; \
tarupfiles; exit" 1 2

#ANNOUNCE
echo "If at anytime during the execution of this script, the duration"
echo "exceeds the maximum suggested time, issue Ctrl-C to cancel"
echo "The script will then clean up, dump any active db2 trace,"
echo "and tar up output files. Please allow 3 minutes for this"
echo ""
echo ""
sleep 15


#OS CONFIG info
echo "started OS CONFIG info" `date` | tee -a db2service.log
echo "should complete in less than one minute"
/usr/bin/oslevel -s > OSCONFIG/machine.cfg 2>&1
/usr/sbin/lsattr -E -l sys0 >> OSCONFIG/machine.cfg 2>&1
/usr/sbin/lsattr -El css0 >> OSCONFIG/machine.cfg 2>&1
/usr/sbin/lsdev -C >> OSCONFIG/machine.cfg 2>&1
no -a >> OSCONFIG/machine.cfg 2>&1
/usr/bin/lslpp -ah > OSCONFIG/lslpp.h 2>&1
errpt -a > OSCONFIG/errpt.txt 2>&1
echo "finished OS CONFIG info" `date` | tee -a db2service.log
echo ""| tee -a db2service.log

#DB2 config 1 - these should always execute.
echo "starting basic DB2 CONFIG info" `date` | tee -a db2service.log
echo "should complete in less than one minute"
db2set -all > DB2CONFIG/db2set.all 2>>db2service.log
db2level > DB2CONFIG/db2level.txt 2>>db2service.log
set > DB2CONFIG/set.txt 2>&1
cp $HOME/sqllib/db2nodes.cfg DB2CONFIG > /dev/null 2>&1
echo "finished basic DB2 CONFIG info" `date` | tee -a db2service.log
echo ""| tee -a db2service.log

#OS monitor info 1
echo "starting first iteration of OS monitor info" `date` | tee -a db2service.log
echo "should complete in less than 2 minutes"
uptime > OSSNAPS/netstat.1 2>&1
netstat -v >> OSSNAPS/netstat.1 2>&1
netstat -s -f inet >> OSSNAPS/netstat.1 2>&1
netstat -m >> OSSNAPS/netstat.1 2>&1
uptime > OSSNAPS/nfsstat.1 2>&1
nfsstat >> OSSNAPS/nfsstat.1 2>&1
uptime > OSSNAPS/vmstat.1 2>&1
vmstat 1 10 >> OSSNAPS/vmstat.1 2>&1
uptime > OSSNAPS/iostat.1 2>&1
iostat 5 6 >> OSSNAPS/iostat.1 2>&1
uptime > OSSNAPS/pskelf.1 2>&1
ps -kelf | sort +5 -rn >> OSSNAPS/pskelf.1 2>&1
uptime > OSSNAPS/psaux.1 2>&1
ps aux | sort +5 -rn >> OSSNAPS/psaux.1 2>&1
uptime > OSSNAPS/ipcs.1 2>&1
ipcs -a >> OSSNAPS/ipcs.1 2>&1
uptime > OSSNAPS/lsps.1 2>&1
lsps -a >> OSSNAPS/lsps.1 2>&1
echo "finished first iteration of OS monitor info" `date` | tee -a db2service.log
echo ""| tee -a db2service.log
sleep 30

#OS monitor info 2
echo "starting second iteration of OS monitor info" `date` | tee -a db2service.log
echo "should complete in less than 2 minutes"
uptime > OSSNAPS/netstat.2 2>&1
netstat -v >> OSSNAPS/netstat.2 2>&1
netstat -s -f inet >> OSSNAPS/netstat.2 2>&1
netstat -m >> OSSNAPS/netstat.2 2>&1
uptime > OSSNAPS/nfsstat.2 2>&1
nfsstat >> OSSNAPS/nfsstat.2 2>&1
uptime > OSSNAPS/vmstat.2 2>&1
vmstat 1 10 >> OSSNAPS/vmstat.2 2>&1
uptime > OSSNAPS/iostat.2 2>&1
iostat 5 6 >> OSSNAPS/iostat.2 2>&1
uptime > OSSNAPS/pskelf.2 2>&1
ps -kelf |sort +5 -rn >> OSSNAPS/pskelf.2 2>&1
uptime > OSSNAPS/psaux.2 2>&1
ps aux | sort +5 -rn >> OSSNAPS/psaux.2 2>&1
uptime > OSSNAPS/ipcs.2 2>&1
ipcs -a >> OSSNAPS/ipcs.2 2>&1
uptime > OSSNAPS/lsps.2 2>&1
lsps -a >> OSSNAPS/lsps.2 2>&1
echo "finished second iteration of OS monitor info" `date` | tee -a db2service.log
echo ""| tee -a db2service.log

#partial call stacks
echo "taking call stacks of top CPU agents" `date` | tee -a db2service.log
echo "should complete in less than 6 minutes"
ps -elf | sort +5 -rn | egrep "db2ag|db2pfchr|db2pclnr" | grep $DB2INSTANCE | grep -v grep | head -20 > DB2SNAPS/top.db2agents.1 2>> db2service.log
kill -36 `awk '{print $4}' DB2SNAPS/top.db2agents.1` >> db2service.log 2>&1
sleep 120
ps -elf | sort +5 -rn | egrep "db2ag|db2pfchr|db2pclnr" | grep $DB2INSTANCE | grep -v grep | head -20 > DB2SNAPS/top.db2agents.2 2>> db2service.log
kill -36 `awk '{print $4}' DB2SNAPS/top.db2agents.2` >> db2service.log 2>&1
sleep 120
echo "finished call stacks" `date` | tee -a db2service.log
echo ""| tee -a db2service.log

#AIX trace
echo "starting AIX trace" `date` | tee -a db2service.log
echo "should complete in less than 3 minutes"
trace -L 8000000 -ao ./OSTRACE/aixtrace.raw >> db2service.log 2>&1
sleep 30
trcstop >> db2service.log 2>&1
echo "formatting AIX trace" `date` | tee -a db2service.log
trcrpt -O exec=on,pid=on ./OSTRACE/aixtrace.raw > ./OSTRACE/aixtrace.fmt
echo "finished AIX trace" `date` | tee -a db2service.log
echo ""| tee -a db2service.log

#db2 trace
#issue trace initialization signal *only* if db2fmp32 doesn't exist .
echo "starting db2 trace" `date` | tee -a db2service.log
echo "Issue Ctrl-C if not completed within 3 minutes"
db2trc on -l 8388608 -t >> db2service.log 2>&1
ps -elf | grep -v grep | grep db2fmp32 > /dev/null 2>&1
if [ $? -ne 0 ] ; then
echo "No db2fmp32 processes, issued trace init signal" | tee -a db2service.log

#Please Note that the '-' below is required. It sends the signal to the
#entire db2sysc process group , i.e. -(process_ID_of_db2sysc>
#processes such as db2ckpwd are in the process group but run as root .
#this results in a return such as "kill: -273198: Permission denied."
#though the command will have been as successful (as possible), i.e. we
#will have sent the signal to all the processes we have access to.

kill -60 `ps -elf|grep $DB2INSTANCE|grep db2sysc|grep -v grep| awk '{print '-'$4}'`
else
echo "db2fmp32 processes exist, couldn't issue trace init signal" | tee -a db2service.log
fi
sleep 30
db2trc dmp DB2TRACE/db2trace1.raw >> db2service.log 2>&1
db2trc off >> db2service.log 2>&1
echo "formatting trace" `date` | tee -a db2service.log
db2trc flw DB2TRACE/db2trace1.raw DB2TRACE/db2trace1.flw >> db2service.log 2>&1
db2trc fmt DB2TRACE/db2trace1.raw DB2TRACE/db2trace1.fmt >> db2service.log 2>&1
sleep 30
echo "db2 trace complete" `date` | tee -a db2service.log
echo ""| tee -a db2service.log

#full call stacks
echo "taking full call stacks" `date` | tee -a db2service.log
echo "Issue Ctrl-C if not completed within 10 minutes"

#Please Note that the '-' below is required. It sends the signal to the
#entire db2sysc process group , i.e. -(process_ID_of_db2sysc>
#processes such as db2ckpwd are in the process group but run as root .
#this results in a return such as "kill: -273198: Permission denied."
#though the command will have been as successful (as possible), i.e. we
#will have sent the signal to all the processes we have access to.

kill -36 `ps -elf|grep $DB2INSTANCE|grep db2sysc|grep -v grep| awk '{print '-'$4}'`
sleep 300
uptime > OSSNAPS/pself.3 2>&1
ps -elf |sort +5 -rn >> OSSNAPS/pself.3 2>&1
echo "finished taking full call stacks" `date` | tee -a db2service.log
echo ""| tee -a db2service.log

#DB2PD info - more to be gathered later
echo "gathering db2pd info" `date` | tee -a db2service.log
echo "should complete in less than 3 minutes"
db2pd -inst -alldbs > DB2PD/db2pd.inst.alldbs 2>&1
db2pd -inst -alldbs -alldbp -mempools > DB2PD/db2pd.mem 2>&1
#DB2 config 2 - issuing this late in case any of these hang.
echo "gathering more DB2 CONFIG info" `date` | tee -a db2service.log
echo "Issue Ctrl-C if not completed within 5 minutes"

#grabbing a quick second trace here
`db2trc on -l 8388608 -t >> db2service.log 2>&1
sleep 2
db2trc dmp DB2TRACE/db2trace2.raw >> db2service.log 2>&1
db2trc off >> db2service.log 2>&1
db2trc flw DB2TRACE/db2trace2.raw DB2TRACE/db2trace2.flw >> db2service.log 2>&1
db2trc fmt DB2TRACE/db2trace2.raw DB2TRACE/db2trace2.fmt >> db2service.log 2>&1
`&
db2 get dbm cfg > DB2CONFIG/dbm.cfg 2>&1
db2 terminate >> db2service.log 2>&1

for NODE in $DB2SERVICENODES
do
if [ $MLN -eq 1 ] ; then
export DB2NODE=$NODE
fi
for DB in $*
do
db2 connect to $DB >> db2service.log 2>&1
db2 "select * from syscat.bufferpools" > DB2CONFIG/$DB.bpcfg.n$NODE 2>&1
db2 get db cfg for $DB > DB2CONFIG/$DB.dbcfg.n$NODE 2>&1
db2 terminate >> db2service.log 2>&1
done
done
echo "finished gathering more DB2 CONFIG info" `date` | tee -a db2service.log
echo ""| tee -a db2service.log

#DB2 monitoring info - issuing this later in case of monitor latch contention
echo "gathering DB2 monitoring info" `date` | tee -a db2service.log
echo "Issue Ctrl-C if not completed within 10 minutes"

for NODE in $DB2SERVICENODES
do
if [ $MLN -eq 1 ] ; then
export DB2NODE=$NODE
db2 terminate >> db2service.log 2>&1
fi
db2 update monitor switches using bufferpool on lock on sort on statement on table on uow on >> db2service.log 2>&1
db2pd -inst -alldbs > DB2PD/db2pd.inst.alldbs.$NODE.1 2>&1
db2 get snapshot for database manager > DB2SNAPS/dbmsnap.n$NODE.1 2>&1
db2 list applications show detail > DB2SNAPS/listapps.n$NODE.1 2>&1
for DB in $*
do
db2 get snapshot for database on $DB > DB2SNAPS/$DB.dbsnap.n$NODE.1 2>&1
db2 get snapshot for applications on $DB > DB2SNAPS/$DB.appsnap.n$NODE.1 2>&1
db2 get snapshot for tables on $DB > DB2SNAPS/$DB.tablesnap.n$NODE.1 2>&1
db2 get snapshot for tablespaces on $DB > DB2SNAPS/$DB.tbspsnap.n$NODE.1 2>&1
db2 get snapshot for locks on $DB > DB2SNAPS/$DB.locksnap.n$NODE.1 2>&1
db2 get snapshot for bufferpools on $DB > DB2SNAPS/$DB.bpsnap.n$NODE.1 2>&1
done
done
sleep 60
for NODE in $DB2SERVICENODES
do
if [ $MLN -eq 1 ] ; then
export DB2NODE=$NODE
db2 terminate >> db2service.log 2>&1
db2 update monitor switches using bufferpool on lock on sort on statement on table on uow on >> db2service.log 2>&1
fi
db2pd -inst -alldbs > DB2PD/db2pd.inst.alldbs.$NODE.2 2>&1
db2 get snapshot for database manager > DB2SNAPS/dbmsnap.n$NODE.2 2>&1
db2 list applications show detail > DB2SNAPS/listapps.n$NODE.2 2>&1
for DB in $*
do
db2 get snapshot for database on $DB > DB2SNAPS/$DB.dbsnap.n$NODE.2 2>&1
db2 get snapshot for applications on $DB > DB2SNAPS/$DB.appsnap.n$NODE.2 2>&1
db2 get snapshot for tables on $DB > DB2SNAPS/$DB.tablesnap.n$NODE.2 2>&1
db2 get snapshot for tablespaces on $DB > DB2SNAPS/$DB.tbspsnap.n$NODE.2 2>&1
db2 get snapshot for locks on $DB > DB2SNAPS/$DB.locksnap.n$NODE.2 2>&1
db2 get snapshot for bufferpools on $DB > DB2SNAPS/$DB.bpsnap.n$NODE.2 2>&1
db2 get snapshot for dynamic sql on $DB > DB2SNAPS/$DB.n$NODE.dynsnap 2>&1
done
done
echo "finished gathering DB2 monitoring info" `date` | tee -a db2service.log
echo ""| tee -a db2service.log

tarupfiles