java中文件操作大全
本文为本人在工作学习中的总结,每个方法都经过测试,记在博客上一方面是为了自己日后工作方便,另一方面是为了给大家提供方便,节约时间。
一.获得控制台用户输入的信息
/***/
/**获得控制台用户输入的信息
*@return
*@throwsIOException
*/
public StringgetInputMessage() throws IOException ... {
System.out.println("请输入您的命令∶");
bytebuffer[]=newbyte[1024];
intcount=System.in.read(buffer);
char[]ch=newchar[count-2];//最后两位为结束符,删去不要
for(inti=0;i<count-2;i++)
ch[i]=(char)buffer[i];
Stringstr=newString(ch);
returnstr;
}
*@return
*@throwsIOException
*/
public StringgetInputMessage() throws IOException ... {
System.out.println("请输入您的命令∶");
bytebuffer[]=newbyte[1024];
intcount=System.in.read(buffer);
char[]ch=newchar[count-2];//最后两位为结束符,删去不要
for(inti=0;i<count-2;i++)
ch[i]=(char)buffer[i];
Stringstr=newString(ch);
returnstr;
}
可以返回用户输入的信息,不足之处在于不支持中文输入,有待进一步改进。
二.复制文件
1.以文件流的方式复制文件
/***/
/**以文件流的方式复制文件
*@paramsrc文件源目录
*@paramdest文件目的目录
*@throwsIOException
*/
public void copyFile(Stringsrc,Stringdest) throws IOException ... {
FileInputStreamin=newFileInputStream(src);
Filefile=newFile(dest);
if(!file.exists())
file.createNewFile();
FileOutputStreamout=newFileOutputStream(file);
intc;
bytebuffer[]=newbyte[1024];
while((c=in.read(buffer))!=-1)...{
for(inti=0;i<c;i++)
out.write(buffer[i]);
}
in.close();
out.close();
}
*@paramsrc文件源目录
*@paramdest文件目的目录
*@throwsIOException
*/
public void copyFile(Stringsrc,Stringdest) throws IOException ... {
FileInputStreamin=newFileInputStream(src);
Filefile=newFile(dest);
if(!file.exists())
file.createNewFile();
FileOutputStreamout=newFileOutputStream(file);
intc;
bytebuffer[]=newbyte[1024];
while((c=in.read(buffer))!=-1)...{
for(inti=0;i<c;i++)
out.write(buffer[i]);
}
in.close();
out.close();
}
该方法经过测试,支持中文处理,并且可以复制多种类型,比如txt,xml,jpg,doc等多种格式
2.利用FileChannel和ByteBuffer来复制文件
/***/
/**复制文件
*@author崔红保
*@paramoldpath以前的目录
*@paramnewpath新目录
*@paramfilename文件名
*@throwsIOException
*/
public void copyFile(Stringoldpath,Stringnewpath,Stringfilename) throws IOException ... {
FileChannelin=newFileInputStream(oldpath+File.separator+filename).getChannel();
FileChannelout=newFileOutputStream(newpath+File.separator+filename).getChannel();
ByteBufferbuffer=ByteBuffer.allocate(1024);
while(in.read(buffer)!=-1)...{
buffer.flip();
out.write(buffer);
buffer.clear();
}
in.close();
out.close();
}
*@author崔红保
*@paramoldpath以前的目录
*@paramnewpath新目录
*@paramfilename文件名
*@throwsIOException
*/
public void copyFile(Stringoldpath,Stringnewpath,Stringfilename) throws IOException ... {
FileChannelin=newFileInputStream(oldpath+File.separator+filename).getChannel();
FileChannelout=newFileOutputStream(newpath+File.separator+filename).getChannel();
ByteBufferbuffer=ByteBuffer.allocate(1024);
while(in.read(buffer)!=-1)...{
buffer.flip();
out.write(buffer);
buffer.clear();
}
in.close();
out.close();
}
但是,在实际操作中,上述方法并不是处理该类操作的最佳方法,我们可以用transferTo方法或transferFrom来实现。
3.利用transferTo方法实现文件复制
/***/
/**复制文件
*@author崔红保
*@paramoldpath以前的目录
*@paramnewpath新目录
*@paramfilename文件名
*@throwsIOException
*/
public void copyFile(Stringoldpath,Stringnewpath,Stringfilename) throws IOException ... {
FileChannelin=newFileInputStream(oldpath+File.separator+filename).getChannel();
FileChannelout=newFileOutputStream(newpath+File.separator+filename).getChannel();
in.transferTo(0,in.size(),out);
in.close();
out.close();
}
*@author崔红保
*@paramoldpath以前的目录
*@paramnewpath新目录
*@paramfilename文件名
*@throwsIOException
*/
public void copyFile(Stringoldpath,Stringnewpath,Stringfilename) throws IOException ... {
FileChannelin=newFileInputStream(oldpath+File.separator+filename).getChannel();
FileChannelout=newFileOutputStream(newpath+File.separator+filename).getChannel();
in.transferTo(0,in.size(),out);
in.close();
out.close();
}
三.写文件
1.利用PrintStream写文件
/***/
/**
*文件输出示例
*/
public void PrintStreamDemo() ... {
try...{
FileOutputStreamout=newFileOutputStream("D:/test.txt");
PrintStreamp=newPrintStream(out);
for(inti=0;i<10;i++)
p.println("Thisis"+i+"line");
}catch(FileNotFoundExceptione)...{
e.printStackTrace();
}
}
*文件输出示例
*/
public void PrintStreamDemo() ... {
try...{
FileOutputStreamout=newFileOutputStream("D:/test.txt");
PrintStreamp=newPrintStream(out);
for(inti=0;i<10;i++)
p.println("Thisis"+i+"line");
}catch(FileNotFoundExceptione)...{
e.printStackTrace();
}
}
2.利用StringBuffer写文件
public
void
StringBufferDemo()
throws
IOException...
...
{
Filefile=newFile("/root/sms.log");
if(!file.exists())
file.createNewFile();
FileOutputStreamout=newFileOutputStream(file,true);
for(inti=0;i<10000;i++)......{
StringBuffersb=newStringBuffer();
sb.append("这是第"+i+"行:前面介绍的各种方法都不关用,为什么总是奇怪的问题");
out.write(sb.toString().getBytes("utf-8"));
}
out.close();
}
Filefile=newFile("/root/sms.log");
if(!file.exists())
file.createNewFile();
FileOutputStreamout=newFileOutputStream(file,true);
for(inti=0;i<10000;i++)......{
StringBuffersb=newStringBuffer();
sb.append("这是第"+i+"行:前面介绍的各种方法都不关用,为什么总是奇怪的问题");
out.write(sb.toString().getBytes("utf-8"));
}
out.close();
}
该方法可以设定使用何种编码,有效解决中文问题。
3.利用BufferedWriter写入文件内容
/***/
/**
*@paramfilename
*/
public void writeFile(Stringfilename) ... {
Filefile=newFile(filename);
try...{
if(!file.exists())
file.createNewFile();
FileWriterfw=newFileWriter(file,true);//传入true表示如果该文件存在,则将新内容添加到文件末尾
BufferedWriterbw=newBufferedWriter(fw);
for(inti=0;i<1000;i++)
bw.write("这是第"+(i+1)+"行,应该没错哈 ");
//关闭
bw.close();
bw=null;
fw.close();
fw=null;
}catch(IOExceptione)...{
e.printStackTrace();
}
}
*@paramfilename
*/
public void writeFile(Stringfilename) ... {
Filefile=newFile(filename);
try...{
if(!file.exists())
file.createNewFile();
FileWriterfw=newFileWriter(file,true);//传入true表示如果该文件存在,则将新内容添加到文件末尾
BufferedWriterbw=newBufferedWriter(fw);
for(inti=0;i<1000;i++)
bw.write("这是第"+(i+1)+"行,应该没错哈 ");
//关闭
bw.close();
bw=null;
fw.close();
fw=null;
}catch(IOExceptione)...{
e.printStackTrace();
}
}
四.文件重命名
/***/
/**文件重命名
*@parampath文件目录
*@paramoldname原来的文件名
*@paramnewname新文件名
*/
public void renameFile(Stringpath,Stringoldname,Stringnewname) ... {
if(!oldname.equals(newname))...{//新的文件名和以前文件名不同时,才有必要进行重命名
Fileoldfile=newFile(path+"/"+oldname);
Filenewfile=newFile(path+"/"+newname);
if(newfile.exists())//若在该目录下已经有一个文件和新文件名相同,则不允许重命名
System.out.println(newname+"已经存在!");
else...{
oldfile.renameTo(newfile);
}
}
}
*@parampath文件目录
*@paramoldname原来的文件名
*@paramnewname新文件名
*/
public void renameFile(Stringpath,Stringoldname,Stringnewname) ... {
if(!oldname.equals(newname))...{//新的文件名和以前文件名不同时,才有必要进行重命名
Fileoldfile=newFile(path+"/"+oldname);
Filenewfile=newFile(path+"/"+newname);
if(newfile.exists())//若在该目录下已经有一个文件和新文件名相同,则不允许重命名
System.out.println(newname+"已经存在!");
else...{
oldfile.renameTo(newfile);
}
}
}
注:如果重命名的目标文件已经存在,则不会进行任何操作
五.转移文件目录
转移文件目录不等同于复制文件,复制文件是复制后两个目录都存在该文件,而转移文件目录则是转移后,只有新目录中存在该文件。
/***/
/**转移文件目录
*@paramfilename文件名
*@paramoldpath旧目录
*@paramnewpath新目录
*@paramcover若新目录下存在和转移文件具有相同文件名的文件时,是否覆盖新目录下文件,cover=true将会覆盖原文件,否则不操作
*/
public void changeDirectory(Stringfilename,Stringoldpath,Stringnewpath, boolean cover) ... {
if(!oldpath.equals(newpath))...{
Fileoldfile=newFile(oldpath+"/"+filename);
Filenewfile=newFile(newpath+"/"+filename);
if(newfile.exists())...{//若在待转移目录下,已经存在待转移文件
if(cover)//覆盖
oldfile.renameTo(newfile);
else
System.out.println("在新目录下已经存在:"+filename);
}
else...{
oldfile.renameTo(newfile);
}
}
}
*@paramfilename文件名
*@paramoldpath旧目录
*@paramnewpath新目录
*@paramcover若新目录下存在和转移文件具有相同文件名的文件时,是否覆盖新目录下文件,cover=true将会覆盖原文件,否则不操作
*/
public void changeDirectory(Stringfilename,Stringoldpath,Stringnewpath, boolean cover) ... {
if(!oldpath.equals(newpath))...{
Fileoldfile=newFile(oldpath+"/"+filename);
Filenewfile=newFile(newpath+"/"+filename);
if(newfile.exists())...{//若在待转移目录下,已经存在待转移文件
if(cover)//覆盖
oldfile.renameTo(newfile);
else
System.out.println("在新目录下已经存在:"+filename);
}
else...{
oldfile.renameTo(newfile);
}
}
}
六.读文件
1.利用FileInputStream读取文件
2.利用BufferedReader读取
在IO操作,利用BufferedReader和BufferedWriter效率会更高一点
3.利用dom4j读取xml文件
/***/
/**从目录中读取xml文件
*@parampath文件目录
*@return
*@throwsDocumentException
*@throwsIOException
*/
public DocumentreadXml(Stringpath) throws DocumentException,IOException ... {
Filefile=newFile(path);
BufferedReaderbufferedreader=newBufferedReader(newFileReader(file));
SAXReadersaxreader=newSAXReader();
Documentdocument=(Document)saxreader.read(bufferedreader);
bufferedreader.close();
returndocument;
}
*@parampath文件目录
*@return
*@throwsDocumentException
*@throwsIOException
*/
public DocumentreadXml(Stringpath) throws DocumentException,IOException ... {
Filefile=newFile(path);
BufferedReaderbufferedreader=newBufferedReader(newFileReader(file));
SAXReadersaxreader=newSAXReader();
Documentdocument=(Document)saxreader.read(bufferedreader);
bufferedreader.close();
returndocument;
}
1.创建文件夹
2.创建新文件
八.删除文件(目录)
/***/
/**创建文件夹
*@parampath目录
*/
public void createDir(Stringpath) ... {
Filedir=newFile(path);
if(!dir.exists())
dir.mkdir();
}
*@parampath目录
*/
public void createDir(Stringpath) ... {
Filedir=newFile(path);
if(!dir.exists())
dir.mkdir();
}
2.创建新文件
/***/
/**创建新文件
*@parampath目录
*@paramfilename文件名
*@throwsIOException
*/
public void createFile(Stringpath,Stringfilename) throws IOException ... {
Filefile=newFile(path+"/"+filename);
if(!file.exists())
file.createNewFile();
}
*@parampath目录
*@paramfilename文件名
*@throwsIOException
*/
public void createFile(Stringpath,Stringfilename) throws IOException ... {
Filefile=newFile(path+"/"+filename);
if(!file.exists())
file.createNewFile();
}
1.删除文件
2.删除目录
要利用File类的delete()方法删除目录时,必须保证该目录下没有文件或者子目录,否则删除失败,因此在实际应用中,我们要删除目录,必须利用递归删除该目录下的所有子目录和文件,然后再删除该目录。
/***/
/**删除文件
*@parampath目录
*@paramfilename文件名
*/
public void delFile(Stringpath,Stringfilename) ... {
Filefile=newFile(path+"/"+filename);
if(file.exists()&&file.isFile())
file.delete();
}
*@parampath目录
*@paramfilename文件名
*/
public void delFile(Stringpath,Stringfilename) ... {
Filefile=newFile(path+"/"+filename);
if(file.exists()&&file.isFile())
file.delete();
}
2.删除目录
要利用File类的delete()方法删除目录时,必须保证该目录下没有文件或者子目录,否则删除失败,因此在实际应用中,我们要删除目录,必须利用递归删除该目录下的所有子目录和文件,然后再删除该目录。
/***/
/**递归删除文件夹
*@parampath
*/
public void delDir(Stringpath) ... {
Filedir=newFile(path);
if(dir.exists())...{
File[]tmp=dir.listFiles();
for(inti=0;i<tmp.length;i++)...{
if(tmp[i].isDirectory())...{
delDir(path+"/"+tmp[i].getName());
}
else...{
tmp[i].delete();
}
}
dir.delete();
}
}
*@parampath
*/
public void delDir(Stringpath) ... {
Filedir=newFile(path);
if(dir.exists())...{
File[]tmp=dir.listFiles();
for(inti=0;i<tmp.length;i++)...{
if(tmp[i].isDirectory())...{
delDir(path+"/"+tmp[i].getName());
}
else...{
tmp[i].delete();
}
}
dir.delete();
}
}
/***/
/**读文件
*@parampath
*@return
*@throwsIOException
*/
public StringBufferedReaderDemo(Stringpath) throws IOException ... {
Filefile=newFile(path);
if(!file.exists()||file.isDirectory())
thrownewFileNotFoundException();
BufferedReaderbr=newBufferedReader(newFileReader(file));
Stringtemp=null;
StringBuffersb=newStringBuffer();
temp=br.readLine();
while(temp!=null)...{
sb.append(temp+"");
temp=br.readLine();
}
returnsb.toString();
}
*@parampath
*@return
*@throwsIOException
*/
public StringBufferedReaderDemo(Stringpath) throws IOException ... {
Filefile=newFile(path);
if(!file.exists()||file.isDirectory())
thrownewFileNotFoundException();
BufferedReaderbr=newBufferedReader(newFileReader(file));
Stringtemp=null;
StringBuffersb=newStringBuffer();
temp=br.readLine();
while(temp!=null)...{
sb.append(temp+"");
temp=br.readLine();
}
returnsb.toString();
}
/***/
/**读文件
*@parampath
*@return
*@throwsIOException
*/
public StringFileInputStreamDemo(Stringpath) throws IOException ... {
Filefile=newFile(path);
if(!file.exists()||file.isDirectory())
thrownewFileNotFoundException();
FileInputStreamfis=newFileInputStream(file);
byte[]buf=newbyte[1024];
StringBuffersb=newStringBuffer();
while((fis.read(buf))!=-1)...{
sb.append(newString(buf));
buf=newbyte[1024];//重新生成,避免和上次读取的数据重复
}
returnsb.toString();
}
*@parampath
*@return
*@throwsIOException
*/
public StringFileInputStreamDemo(Stringpath) throws IOException ... {
Filefile=newFile(path);
if(!file.exists()||file.isDirectory())
thrownewFileNotFoundException();
FileInputStreamfis=newFileInputStream(file);
byte[]buf=newbyte[1024];
StringBuffersb=newStringBuffer();
while((fis.read(buf))!=-1)...{
sb.append(newString(buf));
buf=newbyte[1024];//重新生成,避免和上次读取的数据重复
}
returnsb.toString();
}