1.Update 的其他用法.
为了方便起见,建立了以下简单模型,和构造了部分测试数据:
在某个业务受理子系统BSS中,
-- 客户资料表
create table customers
(
customer_id number ( 8 ) not null , -- 客户标示
city_name varchar2 ( 10 ) not null , -- 所在城市
customer_type char ( 2 ) not null , -- 客户类型
)
create unique index PK_customers on customers(customer_id)
由于某些原因,客户所在城市这个信息并不什么准确,但是在
客户服务部的CRM子系统中,通过主动服务获取了部分客户20 % 的所在
城市等准确信息,于是你将该部分信息提取至一张临时表中:
create table tmp_cust_city
(
customer_id number ( 8 ) not null ,
citye_name varchar2 ( 10 ) not null ,
customer_type char ( 2 ) not null
)
1 )最简单的形式
-- 经确认customers表中所有customer_id小于1000均为'北京'
-- 1000以内的均是公司走向全国之前的本城市的老客户:)
update customers
set city_name = ' 北京 '
where customer_id < 1000
2 )两表(多表)关联update -- 仅在where字句中的连接
-- 这次提取的数据都是VIP,且包括新增的,所以顺便更新客户类别
update customersa -- 使用别名
set customer_type = ' 01 ' -- 01为vip,00为普通
where exists ( select 1
from tmp_cust_cityb
where b.customer_id = a.customer_id
)
3 )两表(多表)关联update -- 被修改值由另一个表运算而来
update customersa -- 使用别名
set city_name = ( select b.city_name from tmp_cust_cityb where b.customer_id = a.customer_id)
where exists ( select 1
from tmp_cust_cityb
where b.customer_id = a.customer_id
)
-- update超过2个值
update customersa -- 使用别名
set (city_name,customer_type) = ( select b.city_name,b.customer_type
from tmp_cust_cityb
where b.customer_id = a.customer_id)
where exists ( select 1
from tmp_cust_cityb
where b.customer_id = a.customer_id
)
注意在这个语句中,
= ( select b.city_name,b.customer_type
from tmp_cust_cityb
where b.customer_id = a.customer_id
)
与
( select 1
from tmp_cust_cityb
where b.customer_id = a.customer_id
)
是两个独立的子查询,查看执行计划可知,对b表 / 索引扫描了2篇;
如果舍弃where条件,则默认对A表进行全表
更新,但由于( select b.city_name from tmp_cust_cityb where where b.customer_id = a.customer_id)
有可能不能提供"足够多"值,因为tmp_cust_city只是一部分客户的信息,
所以报错(如果指定的列 -- city_name可以为NULL则另当别论):
01407 , 00000 ,"cannot update ( % s) to NULL "
// * Cause:
// * Action:
一个替代的方法可以采用:
update customersa -- 使用别名
set city_name = nvl(( select b.city_name from tmp_cust_cityb where b.customer_id = a.customer_id),a.city_name)
或者
set city_name = nvl(( select b.city_name from tmp_cust_cityb where b.customer_id = a.customer_id), ' 未知 ' )
-- 当然这不符合业务逻辑了
4 )上述3)在一些情况下,因为B表的纪录只有A表的20 - 30 % 的纪录数,
考虑A表使用INDEX的情况,使用cursor也许会比关联update带来更好的性能:
set serveroutput on
declare
cursor city_cur is
select customer_id,city_name
from tmp_cust_city
order by customer_id;
begin
for my_cur in city_curloop
update customers
set city_name = my_cur.city_name
where customer_id = my_cur.customer_id;
/**/ /**此处也可以单条/分批次提交,避免锁表情况**/
-- ifmod(city_cur%rowcount,10000)=0then
-- dbms_output.put_line('----');
-- commit;
-- endif;
end loop;
end ;
5 )关联update的一个特例以及性能再探讨
在oracle的update语句语法中,除了可以update表之外,也可以是视图,所以有以下1个特例:
update ( select a.city_name,b.city_name as new_name
from customersa,
tmp_cust_cityb
where b.customer_id = a.customer_id
)
set city_name = new_name
这样能避免对B表或其索引的2次扫描,但前提是A(customer_id)b(customer_id)必需是unique index
或primary key 。否则报错:
01779 , 00000 ,"cannotmodifya column whichmaps to anon key - preserved table "
// * Cause:Anattemptwasmade to insert or update columns of a join view which
// map to anon - key - preserved table .
// * Action:Modifytheunderlyingbasetablesdirectly.
6 )oracle另一个常见错误
回到3)情况,由于某些原因,tmp_cust_citycustomer_id不是唯一index / primary key
update customersa -- 使用别名
set city_name = ( select b.city_name from tmp_cust_cityb where b.customer_id = a.customer_id)
where exists ( select 1
from tmp_cust_cityb
where b.customer_id = a.customer_id
)
当对于一个给定的a.customer_id
( select b.city_name from tmp_cust_cityb where b.customer_id = a.customer_id)
返回多余1条的情况,则会报如下错误:
01427 , 00000 ," single - rowsubquery returns morethanonerow"
// * Cause:
// * Action:
一个比较简单近似于不负责任的做法是
update customersa -- 使用别名
set city_name = ( select b.city_name from tmp_cust_cityb where b.customer_id = a.customer_id)
如何理解 01427 错误,在一个很复杂的多表连接update的语句,经常因考虑不周,出现这个错误,
仍已上述例子来描述,一个比较简便的方法就是将A表代入值表达式中,使用group by 和
having 字句查看重复的纪录
( select b.customer_id,b.city_name, count ( * )
from tmp_cust_cityb,customersa
where b.customer_id = a.customer_id
group by b.customer_id,b.city_name
having count ( * ) >= 2
)
在某个业务受理子系统BSS中,
-- 客户资料表
create table customers
(
customer_id number ( 8 ) not null , -- 客户标示
city_name varchar2 ( 10 ) not null , -- 所在城市
customer_type char ( 2 ) not null , -- 客户类型
)
create unique index PK_customers on customers(customer_id)
由于某些原因,客户所在城市这个信息并不什么准确,但是在
客户服务部的CRM子系统中,通过主动服务获取了部分客户20 % 的所在
城市等准确信息,于是你将该部分信息提取至一张临时表中:
create table tmp_cust_city
(
customer_id number ( 8 ) not null ,
citye_name varchar2 ( 10 ) not null ,
customer_type char ( 2 ) not null
)
1 )最简单的形式
-- 经确认customers表中所有customer_id小于1000均为'北京'
-- 1000以内的均是公司走向全国之前的本城市的老客户:)
update customers
set city_name = ' 北京 '
where customer_id < 1000
2 )两表(多表)关联update -- 仅在where字句中的连接
-- 这次提取的数据都是VIP,且包括新增的,所以顺便更新客户类别
update customersa -- 使用别名
set customer_type = ' 01 ' -- 01为vip,00为普通
where exists ( select 1
from tmp_cust_cityb
where b.customer_id = a.customer_id
)
3 )两表(多表)关联update -- 被修改值由另一个表运算而来
update customersa -- 使用别名
set city_name = ( select b.city_name from tmp_cust_cityb where b.customer_id = a.customer_id)
where exists ( select 1
from tmp_cust_cityb
where b.customer_id = a.customer_id
)
-- update超过2个值
update customersa -- 使用别名
set (city_name,customer_type) = ( select b.city_name,b.customer_type
from tmp_cust_cityb
where b.customer_id = a.customer_id)
where exists ( select 1
from tmp_cust_cityb
where b.customer_id = a.customer_id
)
注意在这个语句中,
= ( select b.city_name,b.customer_type
from tmp_cust_cityb
where b.customer_id = a.customer_id
)
与
( select 1
from tmp_cust_cityb
where b.customer_id = a.customer_id
)
是两个独立的子查询,查看执行计划可知,对b表 / 索引扫描了2篇;
如果舍弃where条件,则默认对A表进行全表
更新,但由于( select b.city_name from tmp_cust_cityb where where b.customer_id = a.customer_id)
有可能不能提供"足够多"值,因为tmp_cust_city只是一部分客户的信息,
所以报错(如果指定的列 -- city_name可以为NULL则另当别论):
01407 , 00000 ,"cannot update ( % s) to NULL "
// * Cause:
// * Action:
一个替代的方法可以采用:
update customersa -- 使用别名
set city_name = nvl(( select b.city_name from tmp_cust_cityb where b.customer_id = a.customer_id),a.city_name)
或者
set city_name = nvl(( select b.city_name from tmp_cust_cityb where b.customer_id = a.customer_id), ' 未知 ' )
-- 当然这不符合业务逻辑了
4 )上述3)在一些情况下,因为B表的纪录只有A表的20 - 30 % 的纪录数,
考虑A表使用INDEX的情况,使用cursor也许会比关联update带来更好的性能:
set serveroutput on
declare
cursor city_cur is
select customer_id,city_name
from tmp_cust_city
order by customer_id;
begin
for my_cur in city_curloop
update customers
set city_name = my_cur.city_name
where customer_id = my_cur.customer_id;
/**/ /**此处也可以单条/分批次提交,避免锁表情况**/
-- ifmod(city_cur%rowcount,10000)=0then
-- dbms_output.put_line('----');
-- commit;
-- endif;
end loop;
end ;
5 )关联update的一个特例以及性能再探讨
在oracle的update语句语法中,除了可以update表之外,也可以是视图,所以有以下1个特例:
update ( select a.city_name,b.city_name as new_name
from customersa,
tmp_cust_cityb
where b.customer_id = a.customer_id
)
set city_name = new_name
这样能避免对B表或其索引的2次扫描,但前提是A(customer_id)b(customer_id)必需是unique index
或primary key 。否则报错:
01779 , 00000 ,"cannotmodifya column whichmaps to anon key - preserved table "
// * Cause:Anattemptwasmade to insert or update columns of a join view which
// map to anon - key - preserved table .
// * Action:Modifytheunderlyingbasetablesdirectly.
6 )oracle另一个常见错误
回到3)情况,由于某些原因,tmp_cust_citycustomer_id不是唯一index / primary key
update customersa -- 使用别名
set city_name = ( select b.city_name from tmp_cust_cityb where b.customer_id = a.customer_id)
where exists ( select 1
from tmp_cust_cityb
where b.customer_id = a.customer_id
)
当对于一个给定的a.customer_id
( select b.city_name from tmp_cust_cityb where b.customer_id = a.customer_id)
返回多余1条的情况,则会报如下错误:
01427 , 00000 ," single - rowsubquery returns morethanonerow"
// * Cause:
// * Action:
一个比较简单近似于不负责任的做法是
update customersa -- 使用别名
set city_name = ( select b.city_name from tmp_cust_cityb where b.customer_id = a.customer_id)
如何理解 01427 错误,在一个很复杂的多表连接update的语句,经常因考虑不周,出现这个错误,
仍已上述例子来描述,一个比较简便的方法就是将A表代入值表达式中,使用group by 和
having 字句查看重复的纪录
( select b.customer_id,b.city_name, count ( * )
from tmp_cust_cityb,customersa
where b.customer_id = a.customer_id
group by b.customer_id,b.city_name
having count ( * ) >= 2
)
2.日期处理
Oracle的解惑一二to_date()与24小时制表示法及mm分钟的显示:
一、在使用Oracle的to_date函数来做日期转换时,很多Java程序员也许会和我一样,直觉的采用“yyyy - MM - ddHH:mm:ss”的格式作为格式进行转换,但是在Oracle中会引起错误:“ORA 01810 格式代码出现两次”。
如: select to_date( ' 2005-01-0113:14:20 ' , ' yyyy-MM-ddHH24:mm:ss ' ) from dual;
原因是SQL中不区分大小写,MM和mm被认为是相同的格式代码,所以Oracle的SQL采用了mi代替分钟。
select to_date( ' 2005-01-0113:14:20 ' , ' yyyy-MM-ddHH24:mi:ss ' ) from dual;
二、另要以24小时的形式显示出来要用HH24
select to_char(sysdate, ' yyyy-MM-ddHH24:mi:ss ' ) from dual; // mi是分钟
select to_char(sysdate, ' yyyy-MM-ddHH24:mm:ss ' ) from dual; // mm会显示月份
一、在使用Oracle的to_date函数来做日期转换时,很多Java程序员也许会和我一样,直觉的采用“yyyy - MM - ddHH:mm:ss”的格式作为格式进行转换,但是在Oracle中会引起错误:“ORA 01810 格式代码出现两次”。
如: select to_date( ' 2005-01-0113:14:20 ' , ' yyyy-MM-ddHH24:mm:ss ' ) from dual;
原因是SQL中不区分大小写,MM和mm被认为是相同的格式代码,所以Oracle的SQL采用了mi代替分钟。
select to_date( ' 2005-01-0113:14:20 ' , ' yyyy-MM-ddHH24:mi:ss ' ) from dual;
二、另要以24小时的形式显示出来要用HH24
select to_char(sysdate, ' yyyy-MM-ddHH24:mi:ss ' ) from dual; // mi是分钟
select to_char(sysdate, ' yyyy-MM-ddHH24:mm:ss ' ) from dual; // mm会显示月份