main()
{
int i=0,j=0;
int get,flag;
int result;
int length;
DWORD index[5]={0,0,0,0,0};
/* 設定 com port 的初始狀態 */
result = init_com_port(com_port1);
/*** Write Buffer ***/
OutBuf[1] = 0x01;
OutBuf[2] = 0x00;
OutBuf[3] = 0x00;
OutBuf[4] = 0x01;
OutBuf[5] = 0x00;
flag=0;i=1;
while(i=1)
{
//First Station
OutBuf[0] = 0x01;
CRC16(OutBuf,6);
// 先將要輸出的資料放在 OutBuf
Sleep(DELAY_TINE);
write_to_com(com_port1);
// 讀到的資料在 InBuf
Sleep(DELAY_TINE);
index[0]=read_from_com(com_port1,0);
//Second Station
OutBuf[0] = 0x02;
CRC16(OutBuf,6);
// 先將要輸出的資料放在 OutBuf
Sleep(DELAY_TINE);
write_to_com(com_port1);
//讀到的資料在 InBuf
Sleep(DELAY_TINE);
index[1]=read_from_com(com_port1,index[0]);
//Third Station
//OutBuf[0] = 0x03;
//CRC16(OutBuf,6);
// 先將要輸出的資料放在 OutBuf
//Sleep(DELAY_TINE);
//write_to_com(com_port1);
// 讀到的資料在 InBuf
//Sleep(DELAY_TINE);
//index[2]=read_from_com(com_port1,index[1]);
//Fourth Station
//OutBuf[0] = 0x04;
//CRC16(OutBuf,6);
// 先將要輸出的資料放在 OutBuf
//Sleep(DELAY_TINE);
//write_to_com(com_port1);
// 讀到的資料在 InBuf
//Sleep(DELAY_TINE);
//index[3]=read_from_com(com_port1,index[2]);
//Fiveth Station
//OutBuf[0] = 0x05;
//CRC16(OutBuf,6);
// 先將要輸出的資料放在 OutBuf
//Sleep(DELAY_TINE);
//write_to_com(com_port1);
// 讀到的資料在 InBuf
//Sleep(DELAY_TINE);
//index[4]=read_from_com(com_port1,index[3]);
//Assign Read PLC data to OldBuf
if(flag==0)
{
for(j=0;j<REAL_LENGTH;j++)
OldBuf[j]=InBuf[j];
//Initial write read data to file
length=index[0]+index[1]+index[2]+index[3]+index[4];
ofstream outfile(FILE_PATH);
for(j=0;j<length;j++)
outfile<<InBuf[j];
outfile.close;
cout<<"/nWrite File To Save OK/n";
flag++;
}
//if OldBuf not equail InBuf then write data to File
WRITE_FILE_FLAG=0;
for(j=0;j<REAL_LENGTH;j++)
if(OldBuf[j]!=InBuf[j])
{
WRITE_FILE_FLAG=1;
OldBuf[j]=InBuf[j];
}
//Write read data to file
if(WRITE_FILE_FLAG==1)
{
length=index[0]+index[1]+index[2]+index[3]+index[4];
ofstream outfile(FILE_PATH);
for(j=0;j<length;j++)
outfile<<InBuf[j];
outfile.close;
cout<<"/nWrite File To Save OK/n";
}
//Exit Program
if(kbhit())
{
get=0;
get=getch();
if(get == 0)get=getch();
if(get == ESC
break;
}
} // while loop
} /*** End of main ***/
/******************************************************
*** Function Name : CRC16 ***
*** Function Descr: Cyclic Redundancy Check ***
*** Remark ***
******************************************************/
CRC16(unsigned char buf[], int lgn)
{
unsigned char parity_tab[8] = {0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80};
unsigned char bbl, ddl, bbh, ddh, tt, tt1, tt2;
int i, j;
lgn+=2 ;
bbl = 0xff;
ddl = 0xff;
bbh = 0xff;
ddh = 0xff;
for (i = 0; i < lgn - 2; i++)
{
tt = buf[i];
bbl = bbl ^ bbl;
ddl = ddl ^ tt;
tt2 = 0;
for (j = 0; j < 8; j++)
{
if ((ddl & parity_tab[j]) != 0)
tt2 += 1;
}
if ((tt2 & 0x01) != 0)
bbl = 0x07;
bbh = ddl;
if ((bbl & 0x01) != 0)
tt = 1;
else
tt = 0;
if ((bbh & 0x01) != 0)
tt1 = 1;
else
tt1 = 0;
bbh = bbh >> 1;
bbl = bbl >> 1;
if (tt == 1)
bbh = bbh | 0x80;
if (tt1 == 1)
bbl = bbl | 0x80;
bbh = bbh ^ ddl;
if ((bbl & 0x01) != 0)
tt = 1;
else
tt = 0;
if ((bbh & 0x01) != 0)
tt1 = 1;
else
tt1 = 0;
bbh = bbh >> 1;
bbl = bbl >> 1;
if (tt == 1)
bbh = bbh | 0x80;
if (tt1 == 1)
bbl = bbl | 0x80;
bbl = bbl ^ ddh;
ddl = bbl;
ddh = bbh;
}
buf[lgn - 2] = ddl;
buf[lgn - 1] = ddh;
} /*** End of CRC16 ***/
{
int i=0,j=0;
int get,flag;
int result;
int length;
DWORD index[5]={0,0,0,0,0};
/* 設定 com port 的初始狀態 */
result = init_com_port(com_port1);
/*** Write Buffer ***/
OutBuf[1] = 0x01;
OutBuf[2] = 0x00;
OutBuf[3] = 0x00;
OutBuf[4] = 0x01;
OutBuf[5] = 0x00;
flag=0;i=1;
while(i=1)
{
//First Station
OutBuf[0] = 0x01;
CRC16(OutBuf,6);
// 先將要輸出的資料放在 OutBuf
Sleep(DELAY_TINE);
write_to_com(com_port1);
// 讀到的資料在 InBuf
Sleep(DELAY_TINE);
index[0]=read_from_com(com_port1,0);
//Second Station
OutBuf[0] = 0x02;
CRC16(OutBuf,6);
// 先將要輸出的資料放在 OutBuf
Sleep(DELAY_TINE);
write_to_com(com_port1);
//讀到的資料在 InBuf
Sleep(DELAY_TINE);
index[1]=read_from_com(com_port1,index[0]);
//Third Station
//OutBuf[0] = 0x03;
//CRC16(OutBuf,6);
// 先將要輸出的資料放在 OutBuf
//Sleep(DELAY_TINE);
//write_to_com(com_port1);
// 讀到的資料在 InBuf
//Sleep(DELAY_TINE);
//index[2]=read_from_com(com_port1,index[1]);
//Fourth Station
//OutBuf[0] = 0x04;
//CRC16(OutBuf,6);
// 先將要輸出的資料放在 OutBuf
//Sleep(DELAY_TINE);
//write_to_com(com_port1);
// 讀到的資料在 InBuf
//Sleep(DELAY_TINE);
//index[3]=read_from_com(com_port1,index[2]);
//Fiveth Station
//OutBuf[0] = 0x05;
//CRC16(OutBuf,6);
// 先將要輸出的資料放在 OutBuf
//Sleep(DELAY_TINE);
//write_to_com(com_port1);
// 讀到的資料在 InBuf
//Sleep(DELAY_TINE);
//index[4]=read_from_com(com_port1,index[3]);
//Assign Read PLC data to OldBuf
if(flag==0)
{
for(j=0;j<REAL_LENGTH;j++)
OldBuf[j]=InBuf[j];
//Initial write read data to file
length=index[0]+index[1]+index[2]+index[3]+index[4];
ofstream outfile(FILE_PATH);
for(j=0;j<length;j++)
outfile<<InBuf[j];
outfile.close;
cout<<"/nWrite File To Save OK/n";
flag++;
}
//if OldBuf not equail InBuf then write data to File
WRITE_FILE_FLAG=0;
for(j=0;j<REAL_LENGTH;j++)
if(OldBuf[j]!=InBuf[j])
{
WRITE_FILE_FLAG=1;
OldBuf[j]=InBuf[j];
}
//Write read data to file
if(WRITE_FILE_FLAG==1)
{
length=index[0]+index[1]+index[2]+index[3]+index[4];
ofstream outfile(FILE_PATH);
for(j=0;j<length;j++)
outfile<<InBuf[j];
outfile.close;
cout<<"/nWrite File To Save OK/n";
}
//Exit Program
if(kbhit())
{
get=0;
get=getch();
if(get == 0)get=getch();
if(get == ESC
![](http://www.chinaunix.net/forum/images/smiles/icon_wink.gif)
}
} // while loop
} /*** End of main ***/
/******************************************************
*** Function Name : CRC16 ***
*** Function Descr: Cyclic Redundancy Check ***
*** Remark ***
******************************************************/
CRC16(unsigned char buf[], int lgn)
{
unsigned char parity_tab[8] = {0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80};
unsigned char bbl, ddl, bbh, ddh, tt, tt1, tt2;
int i, j;
lgn+=2 ;
bbl = 0xff;
ddl = 0xff;
bbh = 0xff;
ddh = 0xff;
for (i = 0; i < lgn - 2; i++)
{
tt = buf[i];
bbl = bbl ^ bbl;
ddl = ddl ^ tt;
tt2 = 0;
for (j = 0; j < 8; j++)
{
if ((ddl & parity_tab[j]) != 0)
tt2 += 1;
}
if ((tt2 & 0x01) != 0)
bbl = 0x07;
bbh = ddl;
if ((bbl & 0x01) != 0)
tt = 1;
else
tt = 0;
if ((bbh & 0x01) != 0)
tt1 = 1;
else
tt1 = 0;
bbh = bbh >> 1;
bbl = bbl >> 1;
if (tt == 1)
bbh = bbh | 0x80;
if (tt1 == 1)
bbl = bbl | 0x80;
bbh = bbh ^ ddl;
if ((bbl & 0x01) != 0)
tt = 1;
else
tt = 0;
if ((bbh & 0x01) != 0)
tt1 = 1;
else
tt1 = 0;
bbh = bbh >> 1;
bbl = bbl >> 1;
if (tt == 1)
bbh = bbh | 0x80;
if (tt1 == 1)
bbl = bbl | 0x80;
bbl = bbl ^ ddh;
ddl = bbl;
ddh = bbh;
}
buf[lgn - 2] = ddl;
buf[lgn - 1] = ddh;
} /*** End of CRC16 ***/