(转)[HowTo] Ubuntu, Lighttpd and PHP5

最新推荐文章于 2024-10-10 09:38:48 发布

南京_杨文

最新推荐文章于 2024-10-10 09:38:48 发布

阅读量389

点赞数

文章标签： php lighttpd ubuntu socket server shell

http://hqman.javaeye.com/blog/180374

Here’s the whole procedure for anyone who is interested.

$ sudo apt get install lighttpd php5-cgi
$ sudo lighty-enable-mod fastcgi

Lighty is installed and running with fastcgi support and PHP is installed, too. Now we only have to change some configuration options to actually make PHP run inside lighty.
Open lighty’s fastcgi.conf

$ gksudo gedit /etc/lighttpd/conf-enabled/10-fastcgi.conf

Change:

## Start an FastCGI server for php4 (needs the php4-cgi package)
fastcgi.server    = ( ".php" =>
    ((
        "bin-path" => "/usr/bin/php4-cgi",
        "socket" => "/tmp/php.socket",
        "max-procs" => 2,
        "idle-timeout" => 20,
        "bin-environment" => (
            "PHP_FCGI_CHILDREN" => "4",
            "PHP_FCGI_MAX_REQUESTS" => "10000"
        ),
        "bin-copy-environment" => (
            "PATH", "SHELL", "USER"
        ),
        "broken-scriptfilename" => "enable"
    ))
)

to:

## Start an FastCGI server for php5 (needs the php5-cgi package)
fastcgi.server    = ( ".php" =>
    ((
        "bin-path" => "/usr/bin/php5-cgi",
        "socket" => "/tmp/php.socket",
        "max-procs" => 1,
        "idle-timeout" => 20,
        "bin-environment" => (
            "PHP_FCGI_CHILDREN" => "2",
            "PHP_FCGI_MAX_REQUESTS" => "10000"
        ),
        "bin-copy-environment" => (
            "PATH", "SHELL", "USER"
        ),
        "broken-scriptfilename" => "enable"
    ))
)

You can change the “max-procs” and “PHP_FCGI_CHILDREN” if you really need to, but I found the values as seen above to be perfectly suited for development.
Restart lighty like this:

$ sudo /etc/init.d/lighttpd force-reload