PB11 在 web form 下毕竟工作方式有很大区别,使用过程中发现很多的对话框窗口已经不再调用操作系统的底层函数来实现了,其中最有影响的当属messagebox函数,虽然屏幕上显示这样的提示:
![](http://blogimg.chinaunix.net/blog/upfile/070302192318.gif)
按钮文字是英文的看起来也不是非常难受,但给用户使用时,总感觉美中不足。为次,多次上到sybase newsgroup寻求解决方案,但最后还是否定了从PB版本上的直接解决方法。以下是我从新闻组上交流到的信息(后者前先者后):
Jim O'Neil:
You're going to use a binary editor on a DLL shipped with
PowerBuilder??? I don't even think .NET would let you do that as it
would be a security breach if the assembly were tampered with -
assuming you could even figure out WHAT to change.
PowerBuilder??? I don't even think .NET would let you do that as it
would be a security breach if the assembly were tampered with -
assuming you could even figure out WHAT to change.
DJ posted a quite viable workaround for you, I would recommend that.
In terms of the other 'system dialogs' that are also not
culture-aware, I supposed the job would be bigger/harder.
In terms of the other 'system dialogs' that are also not
culture-aware, I supposed the job would be bigger/harder.
DJ Huang:
No I am not suggesting to change the DLL or implementation internal to PB11. I do ask you to write a modal PB window with OK/Cancel button or other command buttons, to mimic MessageBox look-and-feel
On 1 Mar 2007 03:44:14 -0800, qland <qland@vip.sina.com> wrote:
>Hi "Jim O'Neil
>
>In which DLL file is the function of implementation messagebox ?
>
>I can change text to chinese if I know the DLL file.
>
>>probably obvious given the context) and the implementation is
>
>On 28 Feb 2007 06:50:11 -0800, "Jim O'Neil [Sybase]"
>< joneil_@_sybase_dot_com> wrote:
>
>
>In which DLL file is the function of implementation messagebox ?
>
>I can change text to chinese if I know the DLL file.
>
>>probably obvious given the context) and the implementation is
>
>On 28 Feb 2007 06:50:11 -0800, "Jim O'Neil [Sybase]"
>< joneil_@_sybase_dot_com> wrote:
>
DJ Huang:
qland/Jim, If the Engineering team has no quick solution, then you can try this work around: Create your own POwerBuilder window, type = response window, with a few buttons to simulate the messagebox. Then call your own MessageBox() function. A meesageBox function in your class will hide the system build-in messagebox when you call within that class
>>The Web Forms generation is not using the underlying MessageBox (as is
>>probably obvious given the context) and the implementation is
>>currently such that you will only see English text. My
>>recommendation would be to submit a case under the beta program so
>>that it gets into our system. If you think this is fundamental to
>>being able to use the product to build applications, you might include
>>a note to that effect in your case notes, so the appropriate priority
>>can be given.
>>
>>On 27 Feb 2007 21:21:28 -0800, qland < qland@vip.sina.com> wrote:
>>
>>>
>>>Thank Jim O'Neil
>>>
>>>Some diaglogs like GetFileOpenDialog, GetFolder, etc. have this same
>>>problem, texts of displaying is english.
>>>
>>>my environment is:
>>>
>>>Windows XP sp2 chinese version
>>>IIS 5.0
>>>my machine is Server and Client
>>>
>>>but it's ok if running smart client app by calling :
>>>
>>>#IF Defined PBDOTNET Then
>>> System.Windows.Forms.MessageBox.Show ("This message is from .net")
>>>#END IF
>>>
>>>The text of "OK" button is chinese
>>>
>>>
>>>Thanks
>>>
>>>
>>>On 27 Feb 2007 05:01:53 -0800, "Jim O'Neil [Sybase]"
>>>< joneil_@_sybase_dot_com> wrote:
>>>
>>>>The MessageBox function will use the machine's OS in order to
>>>>determine the text of the buttons NOT the culture info. There are
>>>>several posts you can find in Google on this. The underlying cause is
>>>>that the .NET MessageBox.Show calls the Win32 MessageBox and the
>>>>latter is not culture-aware.
>>>>
>>>>With that said though, if you see Chinese text for the buttons in PB
>>>>Native Mode on the same machine that hosts IIS, then I would conclude
>>>>that machine IS running Chinese Windows. In that case, I the
>>>>MessageBox you see generated for WebForms should reflect the same
>>>>behavior, and what you are reporting should be considered a bug.
>>>>
>>>>I had sent a note into engineering about your question earlier, and
>>>>will follow up with them. I'd be curious if other system dialogs -
>>>>like the GetFileOpenDialog, GetFolder, etc. have this same problem?
>>>>
>>>>
>>>>On 27 Feb 2007 04:07:37 -0800, qland < qland@vip.sina.com> wrote:
>>>>
>>>>>
>>>>>Thanks.
>>>>>
>>>>>I change PBCultureSource property on the configuration tab to "client"
>>>>>or to "server", the result is the same as shown in figure
>>>>>
>>>>>but it's work fine under PB app native mode.
>>>>>
>>>>>On 26 Feb 2007 08:43:04 -0800, "Dave Fish [Team Sybase]"
>>>>>< dfish@_no_spam_sybase.com> wrote:
>>>>>
>>>>>>Actually that is available in the latest engineering drop (build
>>>>>>6056). It is the PBCultureSource property on the configuration tab. By
>>>>>>default it is set to Server. I'm not sure that it would change
>>>>>>anything in this situation though. I believe message boxes get
>>>>>>converted to Javascript alerts so there may be a way to modify the
>>>>>>generated Javascript for the application if the PBCultureSource
>>>>>>property doesn't handle this.
>>>>>>
>>>>>>Regards,
>>>>>>Dave Fish
>>>>>>Sybase
>>>>>>
>>>>>>On 26 Feb 2007 08:34:21 -0800, "Jim O'Neil [Sybase]"
>>>>>>< joneil_@_sybase_dot_com> wrote:
>>>>>>
>>>>>>>Does the language of that button not reflect the server language? I'd
>>>>>>>suggest that is a bug, or at the very least a limitation that needs to
>>>>>>>be documented.
>>>>>>>
>>>>>>>The next beta drop will have a 'culture' property that *may* address
>>>>>>>this.
>>>>>>>
>>>>>>> On 26 Feb 2007 07:47:08 -0800, qland < qland@vip.sina.com> wrote:
>>>>>>>
>>>>>>>>
>>>>>>>>Hi all
>>>>>>>>
>>>>>>>>In webform app,
>>>>>>>>
>>>>>>>>Is there any way to change the button's text language(i.e. chinese )
>>>>>>>>in the messagebox
>>>>>>>>
>>>>>>>>Thank
>>>>>>>>
>>>>>
所以,最后我按DJ Huang的建议,自己使用PB对象来解决了,下图就是新的结果,基本上实现了原来messagebox函数的所有功能,但无法做到后面3个参数的缺省调用。
![](http://blogimg.chinaunix.net/blog/upfile/070302193310.gif)
调用方式还是与原来的messagebox函数类似:
calling this function like this: messageboxx('prompt','information', icontype, buttonname, default) fox example: messageboxx('error?,'aaaa~r~nbbbbbbbb',Exclamation!,AbortRetryIgnore!,2)
》》》》 messageboxx function There is no heavily overrided messagebox in order to keep the original messagebox function. --------------------------------------------------- global type messageboxx from function_object end type forward prototypes global function integer messageboxx (string as_title, string as_info, icon aic_type, button abt_type, integer ai_default) end prototypes global function integer messageboxx (string as_title, string as_info, icon aic_type, button abt_type, integer ai_default);s_messagebox str_recv integer li_rtn str_recv.as_title = as_title str_recv.as_info = as_info str_recv.aic_type = aic_type str_recv.abt_type = abt_type str_recv.ai_default = ai_default openwithparm(w_messagebox, str_recv) li_rtn = message.DoubleParm return li_rtn end function
越来越喜欢PB11的WebForm了,现正在将原来OA中的某些业务逻辑比较复杂的功能采用PB11实现。
2007-3-12 附加一副PB11做的简单程序的界面:
==============================================================
鉴于多位网友咨询本文的有关内容较多,特对本文进行续作,补充有关内容:
1. s_messagebox 结构
global type s_messagebox from structure
string as_title
string as_info
icon aic_type
button abt_type
integer ai_default
end type
string as_title
string as_info
icon aic_type
button abt_type
integer ai_default
end type
2. w_messageboxx 窗口源代码
forward
global type w_messagebox from window
end type
type mle_info from multilineedit within w_messagebox
end type
type cb_ignore from commandbutton within w_messagebox
end type
type cb_abort from commandbutton within w_messagebox
end type
type cb_retry from commandbutton within w_messagebox
end type
type cb_no from commandbutton within w_messagebox
end type
type cb_cancel from commandbutton within w_messagebox
end type
type cb_yes from commandbutton within w_messagebox
end type
type cb_ok from commandbutton within w_messagebox
end type
type p_stopsign from picture within w_messagebox
end type
type p_question from picture within w_messagebox
end type
type p_information from picture within w_messagebox
end type
type p_exclamation from picture within w_messagebox
end type
end forward
global type w_messagebox from window
end type
type mle_info from multilineedit within w_messagebox
end type
type cb_ignore from commandbutton within w_messagebox
end type
type cb_abort from commandbutton within w_messagebox
end type
type cb_retry from commandbutton within w_messagebox
end type
type cb_no from commandbutton within w_messagebox
end type
type cb_cancel from commandbutton within w_messagebox
end type
type cb_yes from commandbutton within w_messagebox
end type
type cb_ok from commandbutton within w_messagebox
end type
type p_stopsign from picture within w_messagebox
end type
type p_question from picture within w_messagebox
end type
type p_information from picture within w_messagebox
end type
type p_exclamation from picture within w_messagebox
end type
end forward
global type w_messagebox from window
integer width = 2208
integer height = 528
boolean titlebar = true
boolean controlmenu = true
windowtype windowtype = response!
long backcolor = 67108864
string icon = "AppIcon!"
mle_info mle_info
cb_ignore cb_ignore
cb_abort cb_abort
cb_retry cb_retry
cb_no cb_no
cb_cancel cb_cancel
cb_yes cb_yes
cb_ok cb_ok
p_stopsign p_stopsign
p_question p_question
p_information p_information
p_exclamation p_exclamation
end type
global w_messagebox w_messagebox
integer width = 2208
integer height = 528
boolean titlebar = true
boolean controlmenu = true
windowtype windowtype = response!
long backcolor = 67108864
string icon = "AppIcon!"
mle_info mle_info
cb_ignore cb_ignore
cb_abort cb_abort
cb_retry cb_retry
cb_no cb_no
cb_cancel cb_cancel
cb_yes cb_yes
cb_ok cb_ok
p_stopsign p_stopsign
p_question p_question
p_information p_information
p_exclamation p_exclamation
end type
global w_messagebox w_messagebox
type variables
string as_title
string as_info
integer li_rtn = 0
string as_info
integer li_rtn = 0
end variables
on w_messagebox.create
this.mle_info=create mle_info
this.cb_ignore=create cb_ignore
this.cb_abort=create cb_abort
this.cb_retry=create cb_retry
this.cb_no=create cb_no
this.cb_cancel=create cb_cancel
this.cb_yes=create cb_yes
this.cb_ok=create cb_ok
this.p_stopsign=create p_stopsign
this.p_question=create p_question
this.p_information=create p_information
this.p_exclamation=create p_exclamation
this.Control[]={this.mle_info,&
this.cb_ignore,&
this.cb_abort,&
this.cb_retry,&
this.cb_no,&
this.cb_cancel,&
this.cb_yes,&
this.cb_ok,&
this.p_stopsign,&
this.p_question,&
this.p_information,&
this.p_exclamation}
end on
this.mle_info=create mle_info
this.cb_ignore=create cb_ignore
this.cb_abort=create cb_abort
this.cb_retry=create cb_retry
this.cb_no=create cb_no
this.cb_cancel=create cb_cancel
this.cb_yes=create cb_yes
this.cb_ok=create cb_ok
this.p_stopsign=create p_stopsign
this.p_question=create p_question
this.p_information=create p_information
this.p_exclamation=create p_exclamation
this.Control[]={this.mle_info,&
this.cb_ignore,&
this.cb_abort,&
this.cb_retry,&
this.cb_no,&
this.cb_cancel,&
this.cb_yes,&
this.cb_ok,&
this.p_stopsign,&
this.p_question,&
this.p_information,&
this.p_exclamation}
end on
on w_messagebox.destroy
destroy(this.mle_info)
destroy(this.cb_ignore)
destroy(this.cb_abort)
destroy(this.cb_retry)
destroy(this.cb_no)
destroy(this.cb_cancel)
destroy(this.cb_yes)
destroy(this.cb_ok)
destroy(this.p_stopsign)
destroy(this.p_question)
destroy(this.p_information)
destroy(this.p_exclamation)
end on
destroy(this.mle_info)
destroy(this.cb_ignore)
destroy(this.cb_abort)
destroy(this.cb_retry)
destroy(this.cb_no)
destroy(this.cb_cancel)
destroy(this.cb_yes)
destroy(this.cb_ok)
destroy(this.p_stopsign)
destroy(this.p_question)
destroy(this.p_information)
destroy(this.p_exclamation)
end on
event open;
s_messagebox str_recv
integer visible_btns = 0
long ll_cwidth, ll_left, ll_temp
long ll_lspace=100, ll_rspace=100, ll_btnwidth=261, ll_btnspace=36
s_messagebox str_recv
integer visible_btns = 0
long ll_cwidth, ll_left, ll_temp
long ll_lspace=100, ll_rspace=100, ll_btnwidth=261, ll_btnspace=36
str_recv = message.PowerObjectParm
ll_cwidth = lenA(str_recv.as_info)*UnitsToPixels(40, XUnitsToPixels!)
this.width = ll_lspace + PixelsToUnits ( ll_cwidth, XPixelsToUnits!) + ll_rspace
if this.width>2200 then this.width = 2200
this.width = ll_lspace + PixelsToUnits ( ll_cwidth, XPixelsToUnits!) + ll_rspace
if this.width>2200 then this.width = 2200
this.title = str_recv.as_title
this.mle_info.text = str_recv.as_info
if str_recv.aic_type = stopsign! then p_stopsign.visible = true
if str_recv.aic_type = question! then p_question.visible = true
if str_recv.aic_type = information! then p_information.visible = true
if str_recv.aic_type = exclamation! then p_exclamation.visible = true
if str_recv.aic_type = none! then
end if
//确定按钮数目
if str_recv.abt_type = OK! then
visible_btns=1
end if
if str_recv.abt_type = OKCancel! or &
str_recv.abt_type = YesNo! or &
str_recv.abt_type = RetryCancel! then
visible_btns=2
end if
if str_recv.abt_type = YesNoCancel! or &
str_recv.abt_type = AbortRetryIgnore! then
visible_btns=3
end if
ll_temp = cb_ok.width*visible_btns+(visible_btns -1)*ll_btnspace
ll_left = (this.width - ll_temp)/2
if ll_left<0 then
this.width = ll_lspace + ll_temp + ll_rspace
ll_left = ll_lspace
end if
if str_recv.ai_default<1 or str_recv.ai_default > visible_btns then str_recv.ai_default = 1
this.mle_info.text = str_recv.as_info
if str_recv.aic_type = stopsign! then p_stopsign.visible = true
if str_recv.aic_type = question! then p_question.visible = true
if str_recv.aic_type = information! then p_information.visible = true
if str_recv.aic_type = exclamation! then p_exclamation.visible = true
if str_recv.aic_type = none! then
end if
//确定按钮数目
if str_recv.abt_type = OK! then
visible_btns=1
end if
if str_recv.abt_type = OKCancel! or &
str_recv.abt_type = YesNo! or &
str_recv.abt_type = RetryCancel! then
visible_btns=2
end if
if str_recv.abt_type = YesNoCancel! or &
str_recv.abt_type = AbortRetryIgnore! then
visible_btns=3
end if
ll_temp = cb_ok.width*visible_btns+(visible_btns -1)*ll_btnspace
ll_left = (this.width - ll_temp)/2
if ll_left<0 then
this.width = ll_lspace + ll_temp + ll_rspace
ll_left = ll_lspace
end if
if str_recv.ai_default<1 or str_recv.ai_default > visible_btns then str_recv.ai_default = 1
//确定按钮位置并确定: 焦点按钮
if str_recv.abt_type = OK! then
cb_ok.visible = true
cb_ok.x = ll_left
cb_ok.setfocus()
end if
if str_recv.abt_type = OKCancel! then
cb_ok.visible = true
cb_cancel.visible = true
cb_ok.x = ll_left
cb_cancel.x = cb_ok.x + ll_btnwidth + ll_btnspace
if str_recv.ai_default = 1 then cb_ok.setfocus()
if str_recv.ai_default = 2 then cb_cancel.setfocus()
end if
if str_recv.abt_type = YesNo! then
cb_yes.visible = true
cb_no.visible = true
cb_yes.x = ll_left
cb_no.x = cb_yes.x + ll_btnwidth + ll_btnspace
if str_recv.ai_default = 1 then cb_yes.setfocus()
if str_recv.ai_default = 2 then cb_no.setfocus()
end if
if str_recv.abt_type = YesNoCancel! then
cb_yes.visible = true
cb_no.visible = true
cb_cancel.visible = true
cb_yes.x = ll_left
cb_no.x = cb_yes.x + ll_btnwidth + ll_btnspace
cb_cancel.x = cb_no.x + ll_btnwidth + ll_btnspace
if str_recv.ai_default = 1 then cb_yes.setfocus()
if str_recv.ai_default = 2 then cb_no.setfocus()
if str_recv.ai_default = 3 then cb_cancel.setfocus()
end if
if str_recv.abt_type = RetryCancel! then
cb_retry.visible = true
cb_cancel.visible = true
cb_retry.x = ll_left
cb_cancel.x = cb_retry.x + ll_btnwidth + ll_btnspace
if str_recv.ai_default = 1 then cb_retry.setfocus()
if str_recv.ai_default = 2 then cb_cancel.setfocus()
end if
if str_recv.abt_type = AbortRetryIgnore! then
cb_abort.visible = true
cb_retry.visible = true
cb_ignore.visible = true
cb_abort.x = ll_left
cb_retry.x = cb_abort.x + ll_btnwidth + ll_btnspace
cb_ignore.x = cb_retry.x + ll_btnwidth + ll_btnspace
if str_recv.ai_default = 1 then cb_abort.setfocus()
if str_recv.ai_default = 2 then cb_retry.setfocus()
if str_recv.ai_default = 3 then cb_ignore.setfocus()
end if
if str_recv.abt_type = OK! then
cb_ok.visible = true
cb_ok.x = ll_left
cb_ok.setfocus()
end if
if str_recv.abt_type = OKCancel! then
cb_ok.visible = true
cb_cancel.visible = true
cb_ok.x = ll_left
cb_cancel.x = cb_ok.x + ll_btnwidth + ll_btnspace
if str_recv.ai_default = 1 then cb_ok.setfocus()
if str_recv.ai_default = 2 then cb_cancel.setfocus()
end if
if str_recv.abt_type = YesNo! then
cb_yes.visible = true
cb_no.visible = true
cb_yes.x = ll_left
cb_no.x = cb_yes.x + ll_btnwidth + ll_btnspace
if str_recv.ai_default = 1 then cb_yes.setfocus()
if str_recv.ai_default = 2 then cb_no.setfocus()
end if
if str_recv.abt_type = YesNoCancel! then
cb_yes.visible = true
cb_no.visible = true
cb_cancel.visible = true
cb_yes.x = ll_left
cb_no.x = cb_yes.x + ll_btnwidth + ll_btnspace
cb_cancel.x = cb_no.x + ll_btnwidth + ll_btnspace
if str_recv.ai_default = 1 then cb_yes.setfocus()
if str_recv.ai_default = 2 then cb_no.setfocus()
if str_recv.ai_default = 3 then cb_cancel.setfocus()
end if
if str_recv.abt_type = RetryCancel! then
cb_retry.visible = true
cb_cancel.visible = true
cb_retry.x = ll_left
cb_cancel.x = cb_retry.x + ll_btnwidth + ll_btnspace
if str_recv.ai_default = 1 then cb_retry.setfocus()
if str_recv.ai_default = 2 then cb_cancel.setfocus()
end if
if str_recv.abt_type = AbortRetryIgnore! then
cb_abort.visible = true
cb_retry.visible = true
cb_ignore.visible = true
cb_abort.x = ll_left
cb_retry.x = cb_abort.x + ll_btnwidth + ll_btnspace
cb_ignore.x = cb_retry.x + ll_btnwidth + ll_btnspace
if str_recv.ai_default = 1 then cb_abort.setfocus()
if str_recv.ai_default = 2 then cb_retry.setfocus()
if str_recv.ai_default = 3 then cb_ignore.setfocus()
end if
#IF DEFINED PBNATIVE then
//窗口位置设置为center时,实际的位置还是偏上,需要重新设置
this.center = false
Environment envir
GetEnvironment(envir) // 获得屏幕分辨率的大小
this.move((PixelsToUnits(envir.ScreenWidth, XPixelsToUnits!) - this.Width)/2,(PixelsToUnits(envir.ScreenHeight,YPixelsToUnits!)-this.Height)/2 ) // 把窗口移动到屏幕中央
#ELSE
this.center = true
#END IF
//窗口位置设置为center时,实际的位置还是偏上,需要重新设置
this.center = false
Environment envir
GetEnvironment(envir) // 获得屏幕分辨率的大小
this.move((PixelsToUnits(envir.ScreenWidth, XPixelsToUnits!) - this.Width)/2,(PixelsToUnits(envir.ScreenHeight,YPixelsToUnits!)-this.Height)/2 ) // 把窗口移动到屏幕中央
#ELSE
this.center = true
#END IF
end event
type mle_info from multilineedit within w_messagebox
integer x = 270
integer y = 80
integer width = 1792
integer height = 184
integer taborder = 30
integer textsize = -9
integer weight = 400
fontcharset fontcharset = gb2312charset!
fontpitch fontpitch = variable!
string facename = "宋体"
long textcolor = 33554432
long backcolor = 67108864
boolean border = false
boolean autovscroll = true
boolean displayonly = true
end type
integer x = 270
integer y = 80
integer width = 1792
integer height = 184
integer taborder = 30
integer textsize = -9
integer weight = 400
fontcharset fontcharset = gb2312charset!
fontpitch fontpitch = variable!
string facename = "宋体"
long textcolor = 33554432
long backcolor = 67108864
boolean border = false
boolean autovscroll = true
boolean displayonly = true
end type
type cb_ignore from commandbutton within w_messagebox
boolean visible = false
integer x = 1851
integer y = 296
integer width = 261
integer height = 100
integer taborder = 40
integer textsize = -9
integer weight = 400
fontcharset fontcharset = ansi!
fontpitch fontpitch = variable!
string facename = "宋体"
string text = "忽略"
end type
boolean visible = false
integer x = 1851
integer y = 296
integer width = 261
integer height = 100
integer taborder = 40
integer textsize = -9
integer weight = 400
fontcharset fontcharset = ansi!
fontpitch fontpitch = variable!
string facename = "宋体"
string text = "忽略"
end type
event clicked;
closewithreturn(parent, 3)
closewithreturn(parent, 3)
end event
type cb_abort from commandbutton within w_messagebox
boolean visible = false
integer x = 1554
integer y = 296
integer width = 261
integer height = 100
integer taborder = 30
integer textsize = -9
integer weight = 400
fontcharset fontcharset = ansi!
fontpitch fontpitch = variable!
string facename = "宋体"
string text = "终止"
end type
boolean visible = false
integer x = 1554
integer y = 296
integer width = 261
integer height = 100
integer taborder = 30
integer textsize = -9
integer weight = 400
fontcharset fontcharset = ansi!
fontpitch fontpitch = variable!
string facename = "宋体"
string text = "终止"
end type
event clicked;
closewithreturn(parent, 1)
closewithreturn(parent, 1)
end event
type cb_retry from commandbutton within w_messagebox
boolean visible = false
integer x = 1257
integer y = 296
integer width = 261
integer height = 100
integer taborder = 10
integer textsize = -9
integer weight = 400
fontcharset fontcharset = ansi!
fontpitch fontpitch = variable!
string facename = "宋体"
string text = "重试"
end type
boolean visible = false
integer x = 1257
integer y = 296
integer width = 261
integer height = 100
integer taborder = 10
integer textsize = -9
integer weight = 400
fontcharset fontcharset = ansi!
fontpitch fontpitch = variable!
string facename = "宋体"
string text = "重试"
end type
event clicked;
if cb_abort.visible then // AortRetryIgnore!
closewithreturn(parent, 2)
else
closewithreturn(parent, 1) //RetryCancel!
end if
if cb_abort.visible then // AortRetryIgnore!
closewithreturn(parent, 2)
else
closewithreturn(parent, 1) //RetryCancel!
end if
end event
type cb_no from commandbutton within w_messagebox
boolean visible = false
integer x = 960
integer y = 296
integer width = 261
integer height = 100
integer taborder = 30
integer textsize = -9
integer weight = 400
fontcharset fontcharset = ansi!
fontpitch fontpitch = variable!
string facename = "宋体"
string text = "否"
end type
boolean visible = false
integer x = 960
integer y = 296
integer width = 261
integer height = 100
integer taborder = 30
integer textsize = -9
integer weight = 400
fontcharset fontcharset = ansi!
fontpitch fontpitch = variable!
string facename = "宋体"
string text = "否"
end type
event clicked;
closewithreturn(parent, 2)
closewithreturn(parent, 2)
end event
type cb_cancel from commandbutton within w_messagebox
boolean visible = false
integer x = 366
integer y = 296
integer width = 261
integer height = 100
integer taborder = 20
integer textsize = -9
integer weight = 400
fontcharset fontcharset = ansi!
fontpitch fontpitch = variable!
string facename = "宋体"
string text = "取消"
end type
boolean visible = false
integer x = 366
integer y = 296
integer width = 261
integer height = 100
integer taborder = 20
integer textsize = -9
integer weight = 400
fontcharset fontcharset = ansi!
fontpitch fontpitch = variable!
string facename = "宋体"
string text = "取消"
end type
event clicked;
if cb_yes.visible and cb_no.visible then // YesNoCancel!
closewithreturn(parent, 3)
else
closewithreturn(parent, 2) // OKCancel! or RetryCancel!
end if
if cb_yes.visible and cb_no.visible then // YesNoCancel!
closewithreturn(parent, 3)
else
closewithreturn(parent, 2) // OKCancel! or RetryCancel!
end if
end event
type cb_yes from commandbutton within w_messagebox
boolean visible = false
integer x = 663
integer y = 296
integer width = 261
integer height = 100
integer taborder = 20
integer textsize = -9
integer weight = 400
fontcharset fontcharset = ansi!
fontpitch fontpitch = variable!
string facename = "宋体"
string text = "是"
end type
boolean visible = false
integer x = 663
integer y = 296
integer width = 261
integer height = 100
integer taborder = 20
integer textsize = -9
integer weight = 400
fontcharset fontcharset = ansi!
fontpitch fontpitch = variable!
string facename = "宋体"
string text = "是"
end type
event clicked;
closewithreturn(parent, 1)
closewithreturn(parent, 1)
end event
type cb_ok from commandbutton within w_messagebox
boolean visible = false
integer x = 69
integer y = 296
integer width = 261
integer height = 100
integer taborder = 10
integer textsize = -9
integer weight = 400
fontcharset fontcharset = ansi!
fontpitch fontpitch = variable!
string facename = "宋体"
string text = "确定"
end type
boolean visible = false
integer x = 69
integer y = 296
integer width = 261
integer height = 100
integer taborder = 10
integer textsize = -9
integer weight = 400
fontcharset fontcharset = ansi!
fontpitch fontpitch = variable!
string facename = "宋体"
string text = "确定"
end type
event clicked;
closewithreturn(parent, 1)
closewithreturn(parent, 1)
end event
type p_stopsign from picture within w_messagebox
boolean visible = false
integer x = 55
integer y = 56
integer width = 146
integer height = 128
boolean originalsize = true
string picturename = "images/stop.GIF"
boolean focusrectangle = false
end type
boolean visible = false
integer x = 55
integer y = 56
integer width = 146
integer height = 128
boolean originalsize = true
string picturename = "images/stop.GIF"
boolean focusrectangle = false
end type
type p_question from picture within w_messagebox
boolean visible = false
integer x = 55
integer y = 56
integer width = 146
integer height = 128
boolean originalsize = true
string picturename = "images/quest.GIF"
boolean focusrectangle = false
end type
boolean visible = false
integer x = 55
integer y = 56
integer width = 146
integer height = 128
boolean originalsize = true
string picturename = "images/quest.GIF"
boolean focusrectangle = false
end type
type p_information from picture within w_messagebox
boolean visible = false
integer x = 55
integer y = 56
integer width = 146
integer height = 128
boolean originalsize = true
string picturename = "images/info.GIF"
boolean focusrectangle = false
end type
boolean visible = false
integer x = 55
integer y = 56
integer width = 146
integer height = 128
boolean originalsize = true
string picturename = "images/info.GIF"
boolean focusrectangle = false
end type
type p_exclamation from picture within w_messagebox
boolean visible = false
integer x = 55
integer y = 56
integer width = 146
integer height = 128
boolean originalsize = true
string picturename = "images/excl.GIF"
boolean focusrectangle = false
end type
boolean visible = false
integer x = 55
integer y = 56
integer width = 146
integer height = 128
boolean originalsize = true
string picturename = "images/excl.GIF"
boolean focusrectangle = false
end type