madplay移植到mini2440

最新推荐文章于 2024-09-25 17:20:24 发布

jian0826

最新推荐文章于 2024-09-25 17:20:24 发布

阅读量601

点赞数

分类专栏： mini2440 linux madplay 文章标签： library build include 编译器优化测试

本文链接：https://blog.csdn.net/jian0826/article/details/6695470

版权

linux 同时被 3 个专栏收录

6 篇文章 0 订阅

订阅专栏

madplay

1 篇文章 0 订阅

订阅专栏

mini2440

0 篇文章 0 订阅

订阅专栏

移植环境：

主机：VMWare--Fedora 9

开发板：Mini2440--256MB Nand,Kernel:2.6.32.2

编译器：arm-linux-gcc-4.3.2.tgz

madplay的移植需要以下的几个包：madplay-0.15.2b.tar.gz，libmad-0.15.1b.tar.gz，libid3tag-0.15.1b.tar.gz 和 zlib-1.1.4.tar.gz。

http://sourceforge.net/project/showfiles.php?group_id=12349

http://cdnetworks-kr-1.dl.sourceforge.net/project/mad/libid3tag/0.15.1b/libid3tag-0.15.1b.tar.gz

http://cdnetworks-kr-2.dl.sourceforge.net/project/mad/libmad/0.15.1b/libmad-0.15.1b.tar.gz

http://www.gzip.org/zlib/zlib-1.1.4.tar.gz

下载完成后，将这四个文件传送到Fedora系统中的madplay目录下

在madplay目录下建立一个build文件夹用来存放编译生成的文件

[root@localhost madplay]# mkdir build

编译zlib-1.1.4

[root@localhost madplay]# tar xvzf zlib-1.1.4.tar.gz

[root@localhost madplay]# cd zlib-1.1.4

[root@localhost zlib-1.1.4]# vi configure

将

24 AR=${AR-"ar rc"}

25 RANLIB=${RANLIB-"ranlib"}

63 cc=${CC-gcc}

修改为：

AR=${AR-"arm-linux-ar rc"}

RANLIB=${RANLIB-"arm-linux-ranlib"}

cc=${CC-arm-linux-gcc}

[root@localhost zlib-1.1.4]# ./configure --prefix=/opt/software/madplay/build

[root@localhost zlib-1.1.4]# make

[root@localhost zlib-1.1.4]# make install

[root@localhost zlib-1.1.4]# cd ..

[root@localhost madplay]# cd build/

[root@localhost build]# ls

include lib

生成了include lib连个目录，及相应的文件。

编译libid3tag-0.15.1b

[root@localhost madplay]# tar xvzf libid3tag-0.15.1b.tar.gz

[root@localhost madplay]# cd libid3tag-0.15.1b

[root@localhost libid3tag-0.15.1b]# ./configure CC=arm-linux-gcc --prefix=/opt/software/madplay/build --host=arm-linux --disable-debugging --enable-static CPPFLAGS=-I/opt/software/madplay/build/include LDFLAGS=-L/opt/software/madplay/build/lib

[root@localhost libid3tag-0.15.1b]# make

[root@localhost libid3tag-0.15.1b]# make install

编译libmad-0.15.1b

[root@localhost madplay]# tar -xvzf libmad-0.15.1b.tar.gz

[root@localhost madplay]# cd libmad-0.15.1b

[root@localhost libid3tag-0.15.1b]# make

[root@localhost libid3tag-0.15.1b]# make install

编译libmad-0.15.1b

[root@localhost madplay]# tar -xvzf libmad-0.15.1b.tar.gz

[root@localhost madplay]# cd libmad-0.15.1b

[root@localhost libmad-0.15.1b]# ./configure CC=arm-linux-gcc --host=arm-linux --prefix=/opt/software/madplay/build --disable-shared

[root@localhost libmad-0.15.1b]# make

[root@localhost libmad-0.15.1b]# make install

编译madplay-0.15.2b

[root@localhost madplay]# tar xvzf madplay-0.15.2b.tar.gz

[root@localhost madplay]# cd madplay-0.15.2b

[root@localhost madplay-0.15.2b]# ./configure CC=arm-linux-gcc --host=arm-linux --prefix=/opt/software/madplay/build --enable-static --disable-shared CPPFLAGS=-I/opt/software/madplay/build/include LDFLAGS=-L/opt/software/madplay/build/lib

[root@localhost madplay-0.15.2b]# make

[root@localhost madplay-0.15.2b]# make install

编译成功后生成的可执行文件madplay在madplay/build/bin目录下，为了和开发板上自带的madplay区别，将madplay重命名为mymadplay，

[root@localhost bin]# mv madplay mymadplay

优化：

[root@localhost bin]# arm-linux-strip mymadplay

查看所需的库文件。

[root@localhost bin]# arm-linux-readelf -d mymadplay

Dynamic section at offset 0x25ef0 contains 29 entries:

Tag Type Name/Value

0x00000001 (NEEDED) Shared library: [libid3tag.so.0]

0x00000001 (NEEDED) Shared library: [libm.so.6]

0x00000001 (NEEDED) Shared library: [libc.so.6]

0x0000000f (RPATH) Library rpath: [/opt/software/madplay/build/lib]

0x0000001d (RUNPATH) Library runpath:

libm.so.6，libc.so.6在busybox制作根文件系统是已经生成在/lib目录下了，所以只要将/opt/software/madplay/build/lib目录下的libid3tag.so.0文件拷到/lib目录下即可，但是libid3tag.so.0仅仅是一个链接文件，所以，删除libid3tag.a libid3tag.la libmad.a libmad.la libz.a文件，然后将lib文件打包，拷贝到开发板然后解压即可。