Linux移植过程遇到的问题

原文地址：希望今天能完成linux3.3.8在OK6410上的部分移植 作者：always_std

今天解决仅解决了3个小问题，make zImage 成功，还是值得欣慰的。

但是kernel烧进去后还是无法启动，DNW显示卡在Uncompressing Linux... done, booting the kernel.

就不动了，怀疑哪个ID设置错误。。。

看来不是ID错误

解决方案：在配置内核时选上在Device  Drivers->Character  devices->Serial  drivers中选择加载Samsung  SoC  serial  support  ,然后再选上Support  for  console  on  Samsung  SoC  serial  port 

现在打印出来： Uncompressing Linux... done, booting the kernel.

[    0.000000] Booting Linux on physical CPU 0

[    0.000000] Initializing cgroup subsys cpuset

[    0.000000] Initializing cgroup subsys cpu

[    0.000000] Linux version 3.3.8 (root@yinkai-X38-DQ6) (gcc version 4.2.2) #4 Mon Jul 16 19:24:19 CST 2012

[    0.000000] CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387d

[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache

[    0.000000] Machine: ok6410

[    0.000000] Memory policy: ECC disabled, Data cache writeback

[    0.000000] CPU S3C6410 (id 0x36410101)

[    0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics

[    0.000000] camera: no parent clock specified

[    0.000000] S3C64XX: PLL settings, A=800000000, M=532000000, E=24000000

[    0.000000] S3C64XX: HCLK2=266666666, HCLK=133333333, PCLK=66666666

[    0.000000] mout_apll: source is fout_apll (1), rate is 800000000

[    0.000000] mout_epll: source is epll (1), rate is 24000000

[    0.000000] mout_mpll: source is mpll (1), rate is 532000000

[    0.000000] usb-bus-host: source is clk_48m (0), rate is 48000000

[    0.000000] audio-bus: source is mout_epll (0), rate is 24000000

[    0.000000] audio-bus: source is mout_epll (0), rate is 24000000

[    0.000000] audio-bus: source is mout_epll (0), rate is 24000000

[    0.000000] irda-bus: source is mout_epll (0), rate is 24000000

[    0.000000] camera: no parent clock specified

[    0.000000] CPU: found DTCM0 8k @ 00000000, not enabled

[    0.000000] CPU: moved DTCM0 8k to fffe8000, enabled

[    0.000000] CPU: found DTCM1 8k @ 00000000, not enabled

[    0.000000] CPU: moved DTCM1 8k to fffea000, enabled

[    0.000000] CPU: found ITCM0 8k @ 00000000, not enabled

[    0.000000] CPU: moved ITCM0 8k to fffe0000, enabled

[    0.000000] CPU: found ITCM1 8k @ 00000000, not enabled

[    0.000000] CPU: moved ITCM1 8k to fffe2000, enabled

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024

[    0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=cramfs console=ttySAC0,115200

[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)

[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

[    0.000000] allocated 524288 bytes of page_cgroup

[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups

[    0.000000] Memory: 256MB = 256MB total

[    0.000000] Memory: 251096k/251096k available, 11048k reserved, 0K highmem

[    0.000000] Virtual kernel memory layout:

[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

[    0.000000]     DTCM    : 0xfffe8000 - 0xfffec000   (  16 kB)

[    0.000000]     ITCM    : 0xfffe0000 - 0xfffe4000   (  16 kB)

[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)

[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)

[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)

[    0.000000]       .text : 0xc0008000 - 0xc0699530   (6726 kB)

[    0.000000]       .init : 0xc069a000 - 0xc06e0000   ( 280 kB)

[    0.000000]       .data : 0xc06e0000 - 0xc072e618   ( 314 kB)

[    0.000000]        .bss : 0xc072f024 - 0xc0808674   ( 870 kB)

[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

[    0.000000] NR_IRQS:246 nr_irqs:246 246

[    0.000000] VIC @f6000000: id 0x00041192, vendor 0x41

[    0.000000] VIC @f6010000: id 0x00041192, vendor 0x41

[    0.000000] Console: colour dummy device 80x30

[    0.010000] Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)

[    0.050000] pid_max: default: 32768 minimum: 301

[    0.050000] Security Framework initialized

[    0.050000] AppArmor: AppArmor initialized

[    0.050000] Mount-cache hash table entries: 512

[    0.050000] Initializing cgroup subsys cpuacct

[    0.050000] Initializing cgroup subsys memory

[    0.050000] Initializing cgroup subsys devices

[    0.050000] Initializing cgroup subsys freezer

[    0.050000] Initializing cgroup subsys net_cls

[    0.050000] CPU: Testing write buffer coherency: ok

[    0.050000] ftrace: allocating 18660 entries in 55 pages

[    0.110000] hw perfevents: enabled with v6 PMU driver, 3 counters available

[    0.110000] Setting up static identity map for 0x5049ad88 - 0x5049ade4

[    0.110000] devtmpfs: initialized

[    0.110000] gpiochip_add: registered GPIOs 38 to 53 on device: GPF

[    0.110000] gpiochip_add: registered GPIOs 74 to 89 on device: GPI

[    0.110000] gpiochip_add: registered GPIOs 91 to 102 on device: GPJ

[    0.110000] gpiochip_add: registered GPIOs 161 to 176 on device: GPO

[    0.110000] gpiochip_add: registered GPIOs 178 to 192 on device: GPP

[    0.110000] gpiochip_add: registered GPIOs 194 to 202 on device: GPQ

[    0.110000] gpiochip_add: registered GPIOs 144 to 159 on device: GPN

[    0.110000] gpiochip_add: registered GPIOs 0 to 7 on device: GPA

[    0.110000] gpiochip_add: registered GPIOs 9 to 15 on device: GPB

[    0.110000] gpiochip_add: registered GPIOs 17 to 24 on device: GPC

[    0.110000] gpiochip_add: registered GPIOs 26 to 30 on device: GPD

[    0.110000] gpiochip_add: registered GPIOs 32 to 36 on device: GPE

[    0.110000] gpiochip_add: registered GPIOs 55 to 61 on device: GPG

[    0.110000] gpiochip_add: registered GPIOs 137 to 142 on device: GPM

[    0.110000] gpiochip_add: registered GPIOs 63 to 72 on device: GPH

[    0.110000] gpiochip_add: registered GPIOs 104 to 119 on device: GPK

[    0.110000] gpiochip_add: registered GPIOs 121 to 135 on device: GPL

[    0.110000] print_constraints: dummy: 

[    0.110000] NET: Registered protocol family 16

[    0.120000] ok6410: Option string ok6410=0

[    0.120000] ok6410: selected LCD display is 480x272

[    0.120000] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.

[    0.120000] hw-breakpoint: maximum watchpoint size is 4 bytes.

[    0.120000] S3C6410: Initialising architecture

[    0.130000] bio: create slab <bio-0> at 0

[    0.130000] SCSI subsystem initialized

[    0.130000] usbcore: registered new interface driver usbfs

[    0.130000] usbcore: registered new interface driver hub

[    0.130000] usbcore: registered new device driver usb

[    0.130000] NetLabel: Initializing

[    0.130000] NetLabel:  domain hash size = 128

[    0.130000] NetLabel:  protocols = UNLABELED CIPSOv4

[    0.130000] NetLabel:  unlabeled traffic allowed by default

[    0.160000] AppArmor: AppArmor Filesystem Enabled

[    0.190000] NET: Registered protocol family 2

[    0.190000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)

[    0.200000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)

[    0.200000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)

[    0.200000] TCP: Hash tables configured (established 8192 bind 8192)

[    0.200000] TCP reno registered

[    0.200000] UDP hash table entries: 256 (order: 0, 4096 bytes)

[    0.200000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

[    0.200000] NET: Registered protocol family 1

[    0.200000] audit: initializing netlink socket (disabled)

[    0.200000] type=2000 audit(0.200:1): initialized

[    0.340000] VFS: Disk quotas dquot_6.5.2

[    0.340000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[    0.350000] fuse init (API version 7.18)

[    0.350000] msgmni has been set to 490

[    0.350000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

[    0.350000] io scheduler noop registered

[    0.350000] io scheduler deadline registered

[    0.350000] io scheduler cfq registered (default)

[    0.350000] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[    0.360000] s3c6400-uart.0: ttySAC0 at MMIO 0x7f005000 (irq = 69) is a S3C6400/10

[    0.370000] console [ttySAC0] enabled

[    0.370000] s3c6400-uart.1: ttySAC1 at MMIO 0x7f005400 (irq = 70) is a S3C6400/10

[    0.380000] s3c6400-uart.2: ttySAC2 at MMIO 0x7f005800 (irq = 71) is a S3C6400/10

[    0.390000] s3c6400-uart.3: ttySAC3 at MMIO 0x7f005c00 (irq = 72) is a S3C6400/10

[    0.410000] brd: module loaded

[    0.420000] loop: module loaded

[    0.420000] Fixed MDIO Bus: probed

[    0.420000] tun: Universal TUN/TAP device driver, 1.6

[    0.430000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

[    0.430000] PPP generic driver version 2.4.2

[    0.440000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    0.450000] s3c2410-ohci s3c2410-ohci: S3C24XX OHCI

[    0.450000] s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1

[    0.460000] s3c2410-ohci s3c2410-ohci: irq 79, io mem 0x74300000

[    0.520000] s3c2410-ohci s3c2410-ohci: init err (00000000 0000)

[    0.520000] ohci_hcd: can't start s3c24xx

[    0.520000] s3c2410-ohci s3c2410-ohci: startup error -75

[    0.520000] s3c2410-ohci s3c2410-ohci: USB bus 1 deregistered

[    0.530000] s3c2410-ohci: probe of s3c2410-ohci failed with error -75

[    0.540000] mousedev: PS/2 mouse device common for all mice

[    0.540000] device-mapper: uevent: version 1.0.3

[    0.550000] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com

[    0.560000] device-mapper: multipath: version 1.3.0 loaded

[    0.560000] device-mapper: multipath round-robin: version 1.0.0 loaded

[    0.570000] cpufreq: Failed to obtain VDDARM: -19

[    0.570000] cpufreq: Only frequency scaling available

[    0.580000] cpuidle: using governor ladder

[    0.580000] TCP cubic registered

[    0.590000] NET: Registered protocol family 10

[    0.590000] NET: Registered protocol family 17

[    0.590000] Registering the dns_resolver key type

[    0.600000] registered taskstats version 1

[    0.600000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)

[    0.610000] md: Waiting for all devices to be available before autodetect

[    0.610000] md: If you don't use raid, use raid=noautodetect

[    0.620000] md: Autodetecting RAID arrays.

[    0.620000] md: Scanned 0 and added 0 devices.

[    0.630000] md: autorun ...

[    0.630000] md: ... autorun DONE.

[    0.640000] VFS: Cannot open root device "mtdblock2" or unknown-block(0,0)

[    0.640000] Please append a correct "root=" boot option; here are the available partitions:

[    0.650000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)

[    0.660000] [<c000fdc8>] (unwind_backtrace+0x0/0xfc) from [<c000d1f4>] (dump_stack+0x1c/0x20)

[    0.670000] [<c000d1f4>] (dump_stack+0x1c/0x20) from [<c001c764>] (panic+0x80/0x1f4)

[    0.670000] [<c001c764>] (panic+0x80/0x1f4) from [<c069adc4>] (mount_block_root+0x12c/0x2d8)

[    0.680000] [<c069adc4>] (mount_block_root+0x12c/0x2d8) from [<c069afc4>] (mount_root+0x54/0x6c)

[    0.690000] [<c069afc4>] (mount_root+0x54/0x6c) from [<c069b13c>] (prepare_namespace+0x160/0x1f4)

[    0.700000] [<c069b13c>] (prepare_namespace+0x160/0x1f4) from [<c069a664>] (kernel_init+0x114/0x15c)

[    0.710000] [<c069a664>] (kernel_init+0x114/0x15c) from [<c0009f70>] (kernel_thread_exit+0x0/0x8)

这个错误在于kernel配置fs时出现问题，解决方案：

kernel 配置时：device drivers -> Memory Technology Device (MTD) support --->Caching block device access to MTD devices 选上

现在进行到：[    0.590000] Kernel panic - not syncing: Attempted to kill init!

n:      serial

Out:     serial

Err:     serial

Hit any key to stop autoboot:   0 

NAND read: device 0 offset 0x100000, size 0x500000

  5242880 bytes read: OK

Boot with zImage

Starting kernel ...

Uncompressing Linux... done, booting the kernel.

[     0.000000] Booting Linux on physical CPU 0

[     0.000000] Initializing cgroup subsys cpuset

[     0.000000] Initializing cgroup subsys cpu

[     0.000000] Linux version 3.3.8 (root@u1104x32) (gcc version 4.2.2) #5 Tue Jul 17 17:35:08 CST 2012

[     0.000000] CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387d

[     0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache

[     0.000000] Machine: ok6410

[     0.000000] Memory policy: ECC disabled, Data cache writeback

[     0.000000] CPU S3C6410 (id 0x36410101)

[     0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics

[     0.000000] camera: no parent clock specified

[     0.000000] S3C64XX: PLL settings, A=532000000, M=532000000, E=24000000

[     0.000000] S3C64XX: HCLK2=266000000, HCLK=133000000, PCLK=66500000

[     0.000000] mout_apll: source is fout_apll (1), rate is 532000000

[     0.000000] mout_epll: source is epll (1), rate is 24000000

[     0.000000] mout_mpll: source is mpll (1), rate is 532000000

[     0.000000] usb-bus-host: source is clk_48m (0), rate is 48000000

[     0.000000] audio-bus: source is mout_epll (0), rate is 24000000

[     0.000000] audio-bus: source is mout_epll (0), rate is 24000000

[     0.000000] audio-bus: source is mout_epll (0), rate is 24000000

[     0.000000] irda-bus: source is mout_epll (0), rate is 24000000

[     0.000000] camera: no parent clock specified

[     0.000000] CPU: found DTCM0 8k @ 00000000, not enabled

[     0.000000] CPU: moved DTCM0 8k to fffe8000, enabled

[     0.000000] CPU: found DTCM1 8k @ 00000000, not enabled

[     0.000000] CPU: moved DTCM1 8k to fffea000, enabled

[     0.000000] CPU: found ITCM0 8k @ 00000000, not enabled

[     0.000000] CPU: moved ITCM0 8k to fffe0000, enabled

[     0.000000] CPU: found ITCM1 8k @ 00000000, not enabled

[     0.000000] CPU: moved ITCM1 8k to fffe2000, enabled

[     0.000000] Built 1 zonelists in Zone order, mobility grouping on.   Total pages: 65024

[     0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=cramfs console=ttySAC0,115200

[     0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)

[     0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

[     0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

[     0.000000] allocated 524288 bytes of page_cgroup

[     0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups

[     0.000000] Memory: 256MB = 256MB total

[     0.000000] Memory: 251052k/251052k available, 11092k reserved, 0K highmem

[     0.000000] Virtual kernel memory layout:

[     0.000000]     vector   : 0xffff0000 - 0xffff1000   (   4 kB)

[     0.000000]     DTCM     : 0xfffe8000 - 0xfffec000   (   16 kB)

[     0.000000]     ITCM     : 0xfffe0000 - 0xfffe4000   (   16 kB)

[     0.000000]     fixmap   : 0xfff00000 - 0xfffe0000   ( 896 kB)

[     0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)

[     0.000000]     lowmem   : 0xc0000000 - 0xd0000000   ( 256 MB)

[     0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

[     0.000000]     modules : 0xbf000000 - 0xbfe00000   (   14 MB)

[     0.000000]       .text : 0xc0008000 - 0xc06b7c78   (6848 kB)

[     0.000000]       .init : 0xc06b8000 - 0xc06ff000   ( 284 kB)

[     0.000000]       .data : 0xc0700000 - 0xc0755278   ( 341 kB)

[     0.000000]         .bss : 0xc0756024 - 0xc08122f4   ( 753 kB)

[     0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

[     0.000000] NR_IRQS:246 nr_irqs:246 246

[     0.000000] VIC @f6000000: id 0x00041192, vendor 0x41

[     0.000000] VIC @f6010000: id 0x00041192, vendor 0x41

[     0.000000] Console: colour dummy device 80x30

[     0.010000] Calibrating delay loop... 528.79 BogoMIPS (lpj=2643968)

[     0.060000] pid_max: default: 32768 minimum: 301

[     0.070000] Security Framework initialized

[     0.070000] AppArmor: AppArmor initialized

[     0.070000] Mount-cache hash table entries: 512

[     0.070000] Initializing cgroup subsys cpuacct

[     0.070000] Initializing cgroup subsys memory

[     0.070000] Initializing cgroup subsys devices

[     0.070000] Initializing cgroup subsys freezer

[     0.070000] Initializing cgroup subsys net_cls

[     0.070000] Initializing cgroup subsys blkio

[     0.070000] CPU: Testing write buffer coherency: ok

[     0.070000] ftrace: allocating 19131 entries in 57 pages

[     0.130000] hw perfevents: enabled with v6 PMU driver, 3 counters available

[     0.130000] Setting up static identity map for 0x504b12c8 - 0x504b1324

[     0.130000] devtmpfs: initialized

[     0.140000] gpiochip_add: registered GPIOs 38 to 53 on device: GPF

[     0.140000] gpiochip_add: registered GPIOs 74 to 89 on device: GPI

[     0.140000] gpiochip_add: registered GPIOs 91 to 102 on device: GPJ

[     0.140000] gpiochip_add: registered GPIOs 161 to 176 on device: GPO

[     0.140000] gpiochip_add: registered GPIOs 178 to 192 on device: GPP

[     0.140000] gpiochip_add: registered GPIOs 194 to 202 on device: GPQ

[     0.140000] gpiochip_add: registered GPIOs 144 to 159 on device: GPN

[     0.140000] gpiochip_add: registered GPIOs 0 to 7 on device: GPA

[     0.140000] gpiochip_add: registered GPIOs 9 to 15 on device: GPB

[     0.140000] gpiochip_add: registered GPIOs 17 to 24 on device: GPC

[     0.140000] gpiochip_add: registered GPIOs 26 to 30 on device: GPD

[     0.140000] gpiochip_add: registered GPIOs 32 to 36 on device: GPE

[     0.140000] gpiochip_add: registered GPIOs 55 to 61 on device: GPG

[     0.140000] gpiochip_add: registered GPIOs 137 to 142 on device: GPM

[     0.140000] gpiochip_add: registered GPIOs 63 to 72 on device: GPH

[     0.140000] gpiochip_add: registered GPIOs 104 to 119 on device: GPK

[     0.140000] gpiochip_add: registered GPIOs 121 to 135 on device: GPL

[     0.140000] print_constraints: dummy: 

[     0.140000] NET: Registered protocol family 16

[     0.140000] ok6410: Option string ok6410=0

[     0.140000] ok6410: selected LCD display is 480x272

[     0.140000] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.

[     0.140000] hw-breakpoint: maximum watchpoint size is 4 bytes.

[     0.140000] S3C6410: Initialising architecture

[     0.160000] bio: create slab <bio-0> at 0

[     0.160000] SCSI subsystem initialized

[     0.160000] usbcore: registered new interface driver usbfs

[     0.160000] usbcore: registered new interface driver hub

[     0.160000] usbcore: registered new device driver usb

[     0.160000] NetLabel: Initializing

[     0.160000] NetLabel:   domain hash size = 128

[     0.160000] NetLabel:   protocols = UNLABELED CIPSOv4

[     0.160000] NetLabel:   unlabeled traffic allowed by default

[     0.200000] AppArmor: AppArmor Filesystem Enabled

[     0.230000] NET: Registered protocol family 2

[     0.230000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)

[     0.230000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)

[     0.230000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)

[     0.230000] TCP: Hash tables configured (established 8192 bind 8192)

[     0.230000] TCP reno registered

[     0.230000] UDP hash table entries: 256 (order: 0, 4096 bytes)

[     0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

[     0.230000] NET: Registered protocol family 1

[     0.230000] audit: initializing netlink socket (disabled)

[     0.230000] type=2000 audit(0.230:1): initialized

[     0.440000] VFS: Disk quotas dquot_6.5.2

[     0.440000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[     0.440000] fuse init (API version 7.18)

[     0.440000] msgmni has been set to 490

[     0.450000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

[     0.450000] io scheduler noop registered

[     0.450000] io scheduler deadline registered

[     0.450000] io scheduler cfq registered (default)

[     0.450000] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled

[     0.470000] s3c6400-uart.0: ttySAC0 at MMIO 0x7f005000 (irq = 69) is a S3C6400/10

[     0.480000] console [ttySAC0] enabled

[     0.480000] s3c6400-uart.1: ttySAC1 at MMIO 0x7f005400 (irq = 70) is a S3C6400/10

[     0.490000] s3c6400-uart.2: ttySAC2 at MMIO 0x7f005800 (irq = 71) is a S3C6400/10

[     0.500000] s3c6400-uart.3: ttySAC3 at MMIO 0x7f005c00 (irq = 72) is a S3C6400/10

[     0.520000] brd: module loaded

[     0.540000] loop: module loaded

[     0.540000] S3C24XX NAND Driver, (c) 2004 Simtec Electronics

[     0.540000] s3c24xx-nand s3c6400-nand: Tacls=4, 30ns Twrph0=8 60ns, Twrph1=6 45ns

[     0.550000] s3c24xx-nand s3c6400-nand: System booted from NAND

[     0.550000] s3c24xx-nand s3c6400-nand: NAND soft ECC

[     0.560000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung NAND 2GiB 3,3V 8-bit)

[     0.570000] No oob scheme defined for oobsize 218

[     0.570000] ------------[ cut here ]------------

[     0.570000] kernel BUG at drivers/mtd/nand/nand_base.c:3269!

[     0.570000] Internal error: Oops - BUG: 0 [#1]

[     0.570000] Modules linked in:

[     0.570000] CPU: 0     Not tainted   (3.3.8 #5)

[     0.570000] PC is at nand_scan_tail+0xc8/0x62c

[     0.570000] LR is at console_unlock+0x1d4/0x234

[     0.570000] pc : [<c032f1e8>]     lr : [<c001d638>]     psr: 60000013

[     0.570000] sp : cf835e20   ip : c0702028   fp : cf835e3c

[     0.570000] r10: 00000000   r9 : c070d7f0   r8 : c070d7e8

[     0.570000] r7 : cf8ac040   r6 : cf949800   r5 : cf949a40   r4 : cf949a40

[     0.570000] r3 : 1d11931a   r2 : 1d11931a   r1 : 000026e4   r0 : 0000003b

[     0.570000] Flags: nZCv   IRQs on   FIQs on   Mode SVC_32   ISA ARM   Segment kernel

[     0.570000] Control: 00c5387d   Table: 50004008   DAC: 00000017

[     0.570000] Process swapper (pid: 1, stack limit = 0xcf834268)

[     0.570000] Stack: (0xcf835e20 to 0xcf836000)

[     0.570000] 5e20: cf949a40 cfa0d4e0 cf949800 cf8ac040 cf835e84 cf835e40 c0336148 c032f12c

[     0.570000] 5e40: 00000000 00000000 c070d7f8 00000001 00000000 00000001 cf835e74 c070d7f0

[     0.570000] 5e60: c080ca44 c0740ba8 c0740ba8 cfa0d480 00000000 00000000 cf835e94 cf835e88

[     0.570000] 5e80: c02ca530 c0335f08 cf835eb4 cf835e98 c02c8ef0 c02ca518 c070d7f0 c070d824

[     0.570000] 5ea0: c0740ba8 c02c9154 cf835ed4 cf835eb8 c02c91e8 c02c8dc8 cf835ed4 00000000

[     0.570000] 5ec0: cf835ed8 c0740ba8 cf835efc cf835ed8 c02c7954 c02c9160 cf80f1cc cf89fc90

[     0.570000] 5ee0: c060368c c06fdff8 c0740ba8 c0734248 cf835f0c cf835f00 c02c8c98 c02c7900

[     0.570000] 5f00: cf835f3c cf835f10 c02c887c c02c8c80 c060368c 00000000 00000000 c06fdff8

[     0.570000] 5f20: c0740ba8 00000013 c06d9370 cf834000 cf835f64 cf835f40 c02c9780 c02c86e8

[     0.570000] 5f40: cf835f64 00000000 c06fdff8 c06fe5a4 00000013 c06d9370 cf835f74 cf835f68

[     0.570000] 5f60: c02ca878 c02c9724 cf835f84 cf835f78 c06d938c c02ca834 cf835fd4 cf835f88

[     0.570000] 5f80: c0008774 c06d937c c0710eb4 00000000 c06fe5a4 00000013 00000000 00000000

[     0.570000] 5fa0: cf835fbc cf835fb0 c0040a28 c06fe45c c06fdff8 c06fe5a4 00000013 00000000

[     0.570000] 5fc0: 00000000 00000000 cf835ff4 cf835fd8 c06b8600 c0008658 00000000 00000000

[     0.570000] 5fe0: c06b8550 c0009f70 00000000 cf835ff8 c0009f70 c06b855c ffffffff ffffffff

[     0.570000] [<c032f1e8>] (nand_scan_tail+0xc8/0x62c) from [<c0336148>] (s3c24xx_nand_probe+0x24c/0x508)

[     0.570000] [<c0336148>] (s3c24xx_nand_probe+0x24c/0x508) from [<c02ca530>] (platform_drv_probe+0x24/0x28)

[     0.570000] [<c02ca530>] (platform_drv_probe+0x24/0x28) from [<c02c8ef0>] (driver_probe_device+0x134/0x1b4)

[     0.570000] [<c02c8ef0>] (driver_probe_device+0x134/0x1b4) from [<c02c91e8>] (__driver_attach+0x94/0x98)

[     0.570000] [<c02c91e8>] (__driver_attach+0x94/0x98) from [<c02c7954>] (bus_for_each_dev+0x60/0x8c)

[     0.570000] [<c02c7954>] (bus_for_each_dev+0x60/0x8c) from [<c02c8c98>] (driver_attach+0x24/0x2c)

[     0.570000] [<c02c8c98>] (driver_attach+0x24/0x2c) from [<c02c887c>] (bus_add_driver+0x1a0/0x258)

[     0.570000] [<c02c887c>] (bus_add_driver+0x1a0/0x258) from [<c02c9780>] (driver_register+0x68/0x144)

[     0.570000] [<c02c9780>] (driver_register+0x68/0x144) from [<c02ca878>] (platform_driver_register+0x50/0x64)

[     0.570000] [<c02ca878>] (platform_driver_register+0x50/0x64) from [<c06d938c>] (s3c2410_nand_init+0x1c/0x28)

[     0.570000] [<c06d938c>] (s3c2410_nand_init+0x1c/0x28) from [<c0008774>] (do_one_initcall+0x128/0x17c)

[     0.570000] [<c0008774>] (do_one_initcall+0x128/0x17c) from [<c06b8600>] (kernel_init+0xb0/0x15c)

[     0.570000] [<c06b8600>] (kernel_init+0xb0/0x15c) from [<c0009f70>] (kernel_thread_exit+0x0/0x8)

[     0.570000] Code: e3510008 0a0000dc e59f04c4 ebf3bb35 (e7f001f2) 

[     0.580000] ---[ end trace 8f0a1ae9dcfc695e ]---

[     0.590000] Kernel panic - not syncing: Attempted to kill init!