aix网口配置IP

aix网口配置IP

1.查看物理网卡信息

lsdev -Cc adapter

2.查看逻辑接口

lsdev -Cc if

这里显示en和et可以看见各自封装的协议不同，配置网络时，选择标准的网络协议，配置en
en0是Ethernet II protocal interface
et0是802.3 protocal interface
如果配置et逻辑接口，丢包率为50%！系统会认为两张不同的网卡，配置了同一个IP地址！

3.查看网卡和网口的物理位置

#lscfg -vpl ent12

ent12 U78AA.001.WZSKYC2-P1-C3-T1 4-Port 10/100/1000 Base-TX PCI-Express Adapter (14106803)
4-P NIC-TX PCI-E:
EC Level…D77176
Part Number…00E0838
Manufacture ID…YL1026
FRU Number…00E0838
Network Address…3440B5F36341
ROM Level.(alterable)…CL0180
Hardware Location Code…U78AA.001.WZSKYC2-P1-C3-T1

PLATFORM SPECIFIC
Name: ethernet
Node: ethernet@0
Device Type: network
Physical Location: U78AA.001.WZSKYC2-P1-C3-T1

4.配置en12接口网络
利用smit工具配置网络
smit tcpip

Move cursor to desired item and press Enter.

选择 Minimum Configuration & Startup

Further Configuration
Use DHCP for TCPIP Configuration & Startup
IPV6 Configuration
Quality of Service Configuration & Startup
Configure IP Security (IPv4)
Configure IP Security (IPv6)

选择要配置的网络en12

配置IP地址、掩码以及网关

输入完成后，按Enter

至此，IP地址已配置完成，esc+0退出smit
利用ifconfig -a 查看配置是否生效

#ifconfig -a

en12:flags=5e080863,c0<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),PSEG,LARGESEND,CHAIN>
inet 192.168.2.100 netmask 0xffffff00 broadcast 192.168.2.255
tcp_sendspace 131072 tcp_recvspace 65536 rfc1323 0
lo0: flags=e08084b,c0<UP,BROADCAST,LOOPBACK,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,LARGESEND,CHAIN>
inet 127.0.0.1 netmask 0xff000000 broadcast 127.255.255.255
inet6 ::1%1/0
tcp_sendspace 131072 tcp_recvspace 131072 rfc1323 1

查看路由信息
netstat -rn

关闭防火墙

测试网络连通性

ping 192.168.2.254

命令临时配置网络

命令永久配置网络

chdev -l en14 -a netaddr=192.168.3.100 -a netmask=255.255.255.0 -a state=up

原文链接：https://blog.csdn.net/qq_39312123/article/details/108383101