Kevin Jiang

为规范和指导高速公路电子不停车收费系统国产密码算法迁移试点工程的 建设实施，交通运输部公路局组织交通运输部公路科学研究院编制了《高速公路 电子不停车收费（ETC）系统国产密码算法迁移试点工程暂行技术要求》，请试 点省份参照执行。后续编制单位要在总结试点工程成功经验的基础上，再进行修 订完善，以指导全国范围高速公路ETC 系统国产密码算法迁移工程的建设实施。

USB开发大全(第4版)，英文版，作者 Jan Axelson USB开发大全(第4版)，中文版，李鸿鹏等译

MAXIM1103密码键盘开发方案硬件设计原理图

使用OpenSSL实现SM2、SM3算法示例，包括数字签名，密钥交换，加解密，KDF用SM算法

SM2直接调用的libeay32.dll及openssl编程帮助文档.pdf

使用OpenSSL实现SM2、SM3算法示例，包括数字签名，密钥交换，加解密，KDF用SM算法

Microcontroller with USB and Smart Card Reader Interfaces AT83C5122/AT83EC5122/AT85C5122/AT85EC5122/AT89C5122/AT83C5123/AT83EC5123 Features • 80C51 Core : – 6 Clocks per Instruction – Speed up to 16 MHz • 768 Bytes RAM • AT83C5122: 32 Kbytes ROM • AT83C5123: 30 Kbytes ROM • AT85C5122: 32 Kbytes Code RAM and 32 Kbytes ROM • AT89C5122 : 32 Kbytes Flash • AT85EC5122, AT83EC5123, AT83EC5122: Additional 512 Bytes EEPROM (AT24C04) • Multi-protocol Smart Card Interface – Certified According to ISO7816, EMV2000, GIE-CB and WHQM Standards – Asynchronous Protocols T = 0 and T = 1, with Direct and Inverse Modes – Step-up/Down Converter with Programmable Voltage Output: 5V and 3V (60 mA), 1.8V (20 mA) – 4 kV ESD Protection (MIL/STD 833 Class 3) • Alternate Card Support with CLK, IO and RST • USB Module with 7 Endpoints Programmable with In or Out Directions and with ISO, Bulk or Interrupt Transfers • UART with Integrated Baud Rate Generator (BRG) • 8 MHz On-chip Oscillator Analog PLL for 96 MHz Synthesis, Possible 48 MHz Clock Input • Two 16-bit Timer/Counters: T0 and T1 • Hardware Watchdog and Power-fail Detector (PFD) • Idle and Power-down Modes • Self Powered USB • Low Power – 30 mA Maximum Operating Current (at 32 MHz X1) – 100 μA Maximum Power-down Current at 5.4V (without Smart Card and USB) • Voltage Range: 3.6 to 5.5V • For AT8xC5122 version: – Keyboard Interrupt Interface on Port 5 (8 Bits) – Five 8-bit I/O Ports, One 6-bit – SPI Interface (Master Slave) – Packages: VQFP64, PLCC28 – Seven LED Outputs with Programmable Current Sources: 2-4-10 mA • For AT8xC5123 version: – Four LED Outputs with Programmable Current Sources: 2-4-10 mA – Two 8-bit I/O Ports, One 6-bit I/O port, One I/O bit (on LQP32 package) – Packages: LQFP32, PLCC28

TDA8035应用Demo 程序，使用LPC11U14 + TDA8035 * 2，实现读取7816-3异步卡和7816-10同步卡

usb-device-ccid-project-1.4-iar5-at91sam9263-ek ...............................................\at91lib ...............................................\.......\boards ...............................................\.......\......\at91sam9263-ek ...............................................\.......\......\..............\at91sam9263 ...............................................\.......\......\..............\...........\AT91SAM9263.h ...............................................\.......\......\..............\...........\sdram.icf ...............................................\.......\......\..............\...........\sram.icf ...............................................\.......\......\..............\board.h ...............................................\.......\......\..............\board_cstartup_iar.s ...............................................\.......\......\..............\board_lowlevel.c ...............................................\.......\......\..............\board_memories.c ...............................................\.......\......\..............\board_memories.h ...............................................\.......\components ...............................................\.......\..........\iso7816 ...............................................\.......\..........\.......\iso7816_3.h ...............................................\.......\..........\.......\iso7816_4.c ...............................................\.......\..........\.......\iso7816_4.h ...............................................\.......\peripherals ...............................................\.......\...........\aic ...............................................\.......\...........\...\aic.c ...............................................\.......\...........\...\aic.h ...............................................\.......\...........\dbgu ...............................................\.......\...........\....\dbgu.c ...............................................\.......\...........\....\dbgu.h ...............................................\.......\...........\pio ...............................................\.......\...........\...\pio.c ...............................................\.......\...........\...\pio.h ...............................................\.......\...........\...\pio_it.c ...............................................\.......\...........\...\pio_it.h ...............................................\.......\...........\pit ...............................................\.......\...........\...\pit.c ...............................................\.......\...........\...\pit.h ...............................................\.......\...........\usart ...............................................\.......\...........\.....\usart.c ...............................................\.......\...........\.....\usart.h ...............................................\.......\usb ...............................................\.......\...\common ...............................................\.......\...\......\core ...............................................\.......\...\......\....\USBConfigurationDescriptor.c ...............................................\.......\...\......\....\USBConfigurationDescriptor.h ...............................................\.......\...\......\....\USBDeviceDescriptor.h ...............................................\.......\...\......\....\USBDeviceQualifierDescriptor.h ...............................................\.......\...\......\....\USBEndpointDescriptor.c ...............................................\.......\...\......\....\USBEndpointDescriptor.h ...............................................\.......\...\......\....\USBFeatureRequest.c ...............................................\.......\...\......\....\USBFeatureRequest.h ...............................................\.......\...\......\....\USBGenericDescriptor.c ...............................................\.......\...\......\....\USBGenericDescriptor.h ...............................................\.......\...\......\....\USBGenericRequest.c ...............................................\.......\...\......\....\USBGenericRequest.h ...............................................\.......\...\......\....\USBGetDescriptorRequest.c ...............................................\.......\...\......\....\USBGetDescriptorRequest.h ...............................................\.......\...\......\....\USBInterfaceDescriptor.h ...............................................\.......\...\......\....\USBInterfaceRequest.c ...............................................\.......\...\......\....\USBInterfaceRequest.h ...............................................\.......\...\......\....\USBSetAddressRequest.c ...............................................\.......\...\......\....\USBSetAddressRequest.h ...............................................\.......\...\......\....\USBSetConfigurationRequest.c ...............................................\.......\...\......\....\USBSetConfigurationRequest.h ...............................................\.......\...\......\....\USBStringDescriptor.h ...............................................\.......\...\device ...............................................\.......\...\......\ccid ...............................................\.......\...\......\....\cciddriver.c ...............................................\.......\...\......\....\cciddriver.h ...............................................\.......\...\......\....\cciddriverdescriptors.h ...............................................\.......\...\......\core ...............................................\.......\...\......\....\USBD.h ...............................................\.......\...\......\....\USBDCallbacks.h ...............................................\.......\...\......\....\USBDCallbacks_Initialized.c ...............................................\.......\...\......\....\USBDCallbacks_RequestReceived.c ...............................................\.......\...\......\....\USBDCallbacks_Reset.c ...............................................\.......\...\......\....\USBDCallbacks_Resumed.c ...............................................\.......\...\......\....\USBDCallbacks_Suspended.c ...............................................\.......\...\......\....\USBDDriver.c ...............................................\.......\...\......\....\USBDDriver.h ...............................................\.......\...\......\....\USBDDriverCallbacks.h ...............................................\.......\...\......\....\USBDDriverCallbacks_ConfigurationChanged.c ...............................................\.......\...\......\....\USBDDriverCallbacks_InterfaceSettingChanged.c ...............................................\.......\...\......\....\USBDDriverDescriptors.h ...............................................\.......\...\......\....\USBD_OTGHS.c ...............................................\.......\...\......\....\USBD_UDP.c ...............................................\.......\...\......\....\USBD_UDPHS.c ...............................................\.......\utility ...............................................\.......\.......\assert.h ...............................................\.......\.......\led.c ...............................................\.......\.......\led.h ...............................................\.......\.......\math.c ...............................................\.......\.......\math.h ...............................................\.......\.......\trace.h ...............................................\at91sam9263-ek ...............................................\..............\usb-device-ccid-project ...............................................\..............\.......................\ewp ...............................................\..............\.......................\...\at91sam9263-ek.ewd ...............................................\..............\.......................\...\at91sam9263-ek.ewp ...............................................\..............\.......................\main.c ...............................................\..............\.......................\usb-device-ccid-project.eww ...............................................\doc ...............................................\...\css ...............................................\...\...\style.css

原PBOC2.0的第1部分：钱包存折卡片、第2部分：钱包存折应用、第9部分：钱包存折扩展已删除 中国金融集成电路（IC）卡规范 第10部分：借记贷记应用个人化指南.pdf 中国金融集成电路（IC）卡规范 第11部分：非接触式IC卡通讯规范.pdf 中国金融集成电路（IC）卡规范 第12部分：非接触式IC卡支付规范.pdf 中国金融集成电路（IC）卡规范 第13部分：基于借记贷记应用的小额支付规范.pdf 中国金融集成电路（IC）卡规范 第14部分：非接触式IC卡小额支付扩展应用规范.pdf 中国金融集成电路（IC）卡规范 第15部分：电子现金双币支付应用规范.pdf 中国金融集成电路（IC）卡规范 第16部分：IC卡互联网终端规范.pdf 中国金融集成电路（IC）卡规范 第17部分：借记贷记应用安全增强规范.pdf 中国金融集成电路（IC）卡规范 第3部分：与应用无关的IC卡与终端接口规范.pdf 中国金融集成电路（IC）卡规范 第4部分：借记贷记应用规范.pdf 中国金融集成电路（IC）卡规范 第5部分：借记贷记应用卡片规范.pdf 中国金融集成电路（IC）卡规范 第6部分：借记贷记应用终端规范.pdf 中国金融集成电路（IC）卡规范 第7部分：借记贷记应用安全规范.pdf 中国金融集成电路（IC）卡规范 第8部分：与应用无关的非接触式规范.pdf

mot2bin converts a Motorola hex file to binary

SCSI Multimedia Commands – 2 (MMC-2) Revision – 11a August 30, 1999

SCSI Block Commands - 2 (SBC-2) Revision 16 13 November 2004

SCSI Primary Commands - 2 (SPC-2) Revision 20 18 July 2001

SwitchyOptions.bak

2010-05-12 09:36 202,056 pcsc10_v2.02.08.pdf 2005-09-29 11:06 318,349 pcsc1_v2.01.01.pdf 2005-09-29 11:09 219,870 pcsc2_v2.01.01.pdf 2010-04-30 14:08 82,617 pcsc3_v2.01.06_sup.pdf 2010-04-30 14:27 361,869 pcsc3_v2.01.09.pdf 2010-04-30 14:18 534,358 pcsc3_v2.02.00_sup2.pdf 2005-09-29 11:26 478,381 pcsc4_v2.01.01.pdf 2005-09-29 11:27 401,060 pcsc5_v2.01.01.pdf 2005-09-29 11:31 766,842 pcsc6_v2.01.01.pdf 2005-09-29 11:33 258,377 pcsc7_v2.01.01.pdf 2005-09-29 11:36 965,292 pcsc8_v2.01.01.pdf 2005-09-29 11:37 455,355 pcsc9_v2.01.01.pdf 2010-04-30 14:23 74,908 pcscaddendum_v2.0.pdf

串口调试助手V3.8 360会报出有病毒，经本人测试，根本就没有

中国金融集成电路 IC 卡规范第一部分 电子钱包电子存折 应用卡片规范 中国金融集成电路 IC 卡规范第二部分 电子钱包电子存折应用规范 中国金融集成电路 IC 卡规范第三部分 与应用无关的IC 卡与终端接口规范 中国金融集成电路 IC 卡规范第四部分 借记贷记应用规范 中国金融集成电路 IC 卡规范第五部分 借记贷记应用卡片规范 中国金融集成电路 IC 卡规范第六部分 借记贷记应用终端规范 中国金融集成电路 IC 卡规范第七部分 借记贷记应用安全规范 中国金融集成电路 IC 卡规范第八部分 与应用无关的非接触式规范 中国金融集成电路 IC 卡规范第九部分 电子钱包扩展应用指南 中国金融集成电路 IC 卡规范第十部分 借记贷记应用个人化指南 中国金融集成电路 IC 卡规范第十一部分 非接触式IC 卡通讯规范 中国金融集成电路 IC 卡规范第十二部分 非接触式IC卡支付规范 中国金融集成电路 IC 卡规范第十三部分 基于借记贷记应用的小额支付规范">中国金融集成电路 IC 卡规范第一部分 电子钱包电子存折 应用卡片规范 中国金融集成电路 IC 卡规范第二部分 电子钱包电子存折应用规范 中国金融集成电路 IC 卡规范第三部分 与应用无关的IC 卡与终端接口规范 中国金融集成电 [更多]

1.1 特征 .................................................... 1-1 1.2 内部架构概要 ............................................ 1-2 1.3 编程模式 ................................................ 1-3 1.4 数据格式概要 ............................................ 1-4 1.5 操作数寻址方式 .......................................... 1-5 1.6 指令集一览 .............................................. 1-6 2.1 用户编程模式 ............................................. 2-1 2.1.1 通用寄存器 ............................................. 2-1 2.1.2 程序计数器 ............................................. 2-2 2.1.3 条件码/借位 ............................................. 2-2 2.2 管理员编程模式 ........................................... 2-2 2.2.1 替换寄存器组 ........................................... 2-3 2.2.2 处理器状态寄存器 ....................................... 2-4 2.2.2.1 PSR变更 ............................................. 2-6 2.2.2.2 异常识别与处理变更 ................................... 2-6 2.2.2.3 RTE和RFI指令变更 .................................. 2-7 2.2.2.4 MTCR指令变更 ........................................ 2-7 2.2.3 向量基址寄存器 ........................................ 2-7 2.2.4 管理员存储寄存器 ....................................... 2-7 2.2.5 异常影子寄存器 ......................................... 2-7 2.2.6 全局控制寄存器 ......................................... 2-8 2.2.7 全局状态寄存器 ......................................... 2-8 3.1 指令类型和寻址方式 ...................................... 3-1 3.1.1 寄存器--寄存器类指令 .................................. 3-1 3.1.1.1 单寄存器寻址方式 .................................... 3-1 3.1.1.2 双寄存器寻址方式 .................................... 3-1 3.1.1.3 寄存器与5位立即数方式 .............................. 3-2 3.1.1.4 寄存器与5位偏移立即数方式 .......................... 3-2 3.1.1.5 寄存器与7位立即数方式 ............................. 3-2 3.1.1.6 控制寄存器寻址方式 ................................. 3-3 3.1.2 数据存储器访问指令 .................................... 3-3 3.1.2.1 规格化4位立即数寻址方式 ............................ 3-3 3.1.2.2 Load/Store 4个寄存器方式 ........................... 3-3 3.1.2.3 Load/Store 多寄存器方式 ............................. 3-3 3.1.2.4 Load相对字寻址方式 ................................. 3-4 3.1.3 流控制指令 ............................................ 3-4 3.1.3.1 规格化11位位移量方式 .............................. 3-4 3.1.3.2 寄存器寻址方式 ...................................... 3-5 3.1.3.3 间址方式 ............................................ 3-5 3.1.3.4 寄存器与4位负位移寻址方式 .......................... 3-5 3.2 操作码表 ................................................ 3-6 3.3 指令集 .................................................. 3-9 4.1 异常处理一览 ............................................ 4-1 4.2 异常处理步骤 ............................................ 4-2 4.3 异常向量 ................................................ 4-3 4.4 异常类型 ................................................ 4-4 4.4.1 复位异常 (向量位移 0x0) ............................... 4-4 4.4.2 未对界异常(向量位移 0x4) ............................. 4-4 4.4.3 访问异常 (向量位移 0x8) ............................... 4-5 4.4.4 被0除异常 (向量位移 0x0C) ............................ 4-5 4.4.5 非法指令异常 (向量位移 0x10) .......................... 4-5 4.4.6 违反特权异常 (向量位移 0x14) .......................... 4-5 4.4.7 跟踪异常 (向量位移 0x18) .............................. 4-5 4.4.8 断点异常 (向量位移 0x1C) .............................. 4-6 4.4.9 不可恢复错异常 (向量位移 0x20) ........................ 4-7 4.4.10 软件复位异常 (向量位移 0x24) ......................... 4-7 4.4.11 中断异常 ........................................... 4-7 4.4.11.1 正常中断 (INT) ..................................... 4-8 4.4.11.2 快速中断(FINT) ..................................... 4-8 4.4.12 硬件加速器异常 (向量位移 0x30) ....................... 4-8 4.4.13 指令陷阱异常 (向量位移 0x40-0x5C) .................... 4-9 4.5 异常优先级 .............................................. 4-9 4.6 从异常句柄返回 .......................................... 4-11

非接触IC卡原理与应用_陆永宁编着.pdf

Linux那些事儿之我是USB(第2版)-任桥伟-电子工业出版社

Ubuntu-Qt5.2.1安装包及步骤，内部包括Qt静态安装包，以及安装步骤与注意事项等。

TCP调试助手源码，支持服务器端、客户端的TCP连接与测试。

PDF书签导入导出工具，实测有效。

GP规范V2.2-中文版

RSA-Tool 2 Copyright ?2000-2002 by tE! [TMG] Introduction Please read this text carefully. This utility has been made for those who want to use the RSA public key algorithm in their own programs. It offers creation of strong keypairs and a nice integer factorization feature which makes use of several differnt factoring methods including the MPQS. It's possible to factor integers +256 bits in size but please keep in mind that this can take a *lot* of memory and time ! Thus it's not recommended to try factoring bigger numbers on slow machines with a few MB of physical Memory. Don't even think of trying to factor 512 bit numbers for example.. RSA-Tool 2 Features: - Secure keypair generation - Key test dialog - Support of multiple number bases - Auto base-conversion on select - Support of numbers up to 4096 Bits 1. About RSA RSA is a Public Key Cryptosystem developed in 1977 by Ronald Rivest, Adi Shamir and Leonard Adleman. Since 09-20-2000 the U.S. Patent #4,405,829 on this Algorithm EXPIRED! That means that the Algorithm is Public Domain now and can be used by everyone for free, even in commercial software. 2. Parameters P = 1st large prime number Q = 2nd large prime number (sizes of P and Q should not differ too much!) E = Public Exponent (a random number which must fulfil: GCD(E, (P-1)*(Q-1))==1) N = Public Modulus, the product of P and Q: N=P*Q D = Private Exponent: D=E^(-1) mod ((P-1)*(Q-1)) Parameters N and E are public whereas D is -private- and must NEVER be published! P and Q are not longer needed after keygeneration and should be destroyed. To obtain D from the public key (N, E) one needs to try splitting N in its both prime factors P and Q. For a large Modulus N (512 bit and more) with carefully chosen primefactors P and Q this is a very difficult problem. All the security of the RSA encryption scheme relies on that integer factorization problem (tough there's no mathematical proof for it). To fin

对于嵌入式工程师来说一个很不错的文章

USB HID开发必备的资料，包括底层固件的枚举描述符配置，上位机HID设备枚举、查找、连接及通讯

左边是一个TreeView，这个区域显示树型的Asn1层次的数据。 右上是一个显示16进制的View，可以显示，地址，数据，ascII数据。 右下，解释数据的类型，长度，内容，比如名字，字符串，oid，时间等

Qt_Creator快速入门及源码,pdf文档为第一版，源码为第二版，请根据需要下载

C++ GUI Qt 4编程_第二版及源码

蓝牙协议4.0版本

STM32_USB_HID开发资料备份，网上下载的，在CSDN上做个备份

Windows驱动开发技术详解 pdf书+源代码

STM32F0 DISCOVERY开发板官方固件库源码

Copyright 2009 EEMBC All rights reserved. CoreMark is a trademark of EEMBC and EEMBC is a registered trademark of the Embedded Microprocessor Benchmark Consortium.

传说中最后支持Visual C++ 6.0的PSDK版本,想安装一个依然支持VS6的PSDK版本，最后一个能在VS6下工作的PSDK版本是下面的版本：Microsoft Platform SDK, February 2003 版。本安装包分为两部分，此为第二部分，下载后里面有详细的安装步骤。

传说中最后支持Visual C++ 6.0的PSDK版本,想安装一个依然支持VS6的PSDK版本，最后一个能在VS6下工作的PSDK版本是下面的版本：Microsoft Platform SDK, February 2003 版。本安装包分为两部分，此为第一部分，下载后里面有详细的安装步骤。

Don Anderson - Universal Serial Bus System Architecture (MindShare) 2nd _2001

USB System Architecture(2.0)/Second Edition，MINDSHARE, INC.，Don Anderson，Wesley