MEMORY OVERCOMMIT

http://linuxperf.com/?p=102

Overcommit的意思是操作系统承诺给进程的内存大小超过了实际可用的内存。一个保守的操作系统不会允许memory overcommit,有多少就分配多少,再申请就没有了,这其实有些浪费内存,因为进程实际使用到的内存往往比申请的内存要少,比如某个进程malloc()了200MB内存,但实际上只用到了100MB,按照UNIX/Linux的算法,物理内存页的分配发生在使用的瞬间,而不是在申请的瞬间,也就是说未用到的100MB内存根本就没有分配,这100MB内存就闲置了。下面这个概念很重要,是理解memory overcommit的关键:commit(或overcommit)针对的是内存申请,内存申请不等于内存分配,内存只在实际用到的时候才分配。

Linux是允许memory overcommit的,只要你来申请内存我就给你,寄希望于进程实际上用不到那么多内存,但万一用到那么多了呢?那就会发生类似“银行挤兑”的危机,现金(内存)不足了。Linux设计了一个OOM killer机制(OOM = out-of-memory)来处理这种危机:挑选一个进程出来杀死,以腾出部分内存,如果还不够就继续杀…也可通过设置内核参数 vm.panic_on_oom 使得发生OOM时自动重启系统。这都是有风险的机制,重启有可能造成业务中断,杀死进程也有可能导致业务中断,我自己的这个小网站就碰到过这种问题,参见前文。所以Linux 2.6之后允许通过内核参数 vm.overcommit_memory 禁止memory overcommit。

内核参数 vm.overcommit_memory 接受三种取值:

  • 0 – Heuristic overcommit handling. 这是缺省值,它允许overcommit,但过于明目张胆的overcommit会被拒绝,比如malloc一次性申请的内存大小就超过了系统总内存。Heuristic的意思是“试探式的”,内核利用某种算法(对该算法的详细解释请看文末)猜测你的内存申请是否合理,它认为不合理就会拒绝overcommit。
  • 1 – Always overcommit. 允许overcommit,对内存申请来者不拒。
  • 2 – Don’t overcommit. 禁止overcommit。

关于禁止overcommit (vm.overcommit_memory=2) ,需要知道的是,怎样才算是overcommit呢?kernel设有一个阈值,申请的内存总数超过这个阈值就算overcommit,在/proc/meminfo中可以看到这个阈值的大小:

 

1

2

3

# grep -i commit /proc/meminfo

CommitLimit:     5967744 kB

Committed_AS:    5363236 kB

CommitLimit 就是overcommit的阈值,申请的内存总数超过CommitLimit的话就算是overcommit。
这个阈值是如何计算出来的呢?它既不是物理内存的大小,也不是free memory的大小,它是通过内核参数vm.overcommit_ratio或vm.overcommit_kbytes间接设置的,公式如下:
【CommitLimit = (Physical RAM * vm.overcommit_ratio / 100) + Swap】

注:
vm.overcommit_ratio 是内核参数,缺省值是50,表示物理内存的50%。如果你不想使用比率,也可以直接指定内存的字节数大小,通过另一个内核参数 vm.overcommit_kbytes 即可;
如果使用了huge pages,那么需要从物理内存中减去,公式变成:
CommitLimit = ([total RAM] – [total huge TLB RAM]) * vm.overcommit_ratio / 100 + swap
参见https://access.redhat.com/solutions/665023

/proc/meminfo中的 Committed_AS 表示所有进程已经申请的内存总大小,(注意是已经申请的,不是已经分配的),如果 Committed_AS 超过 CommitLimit 就表示发生了 overcommit,超出越多表示 overcommit 越严重。Committed_AS 的含义换一种说法就是,如果要绝对保证不发生OOM (out of memory) 需要多少物理内存。

“sar -r”是查看内存使用状况的常用工具,它的输出结果中有两个与overcommit有关,kbcommit 和 %commit:
kbcommit对应/proc/meminfo中的 Committed_AS;
%commit的计算公式并没有采用 CommitLimit作分母,而是Committed_AS/(MemTotal+SwapTotal),意思是_内存申请_占_物理内存与交换区之和_的百分比。

 

1

2

3

4

$ sar -r

 

05:00:01 PM kbmemfree kbmemused  %memused kbbuffers  kbcached  kbcommit   %commit  kbactive   kbinact   kbdirty

05:10:01 PM    160576   3648460     95.78         0   1846212   4939368     62.74   1390292   1854880         4

 

附:对Heuristic overcommit算法的解释

内核参数 vm.overcommit_memory 的值0,1,2对应的源代码如下,其中heuristic overcommit对应的是OVERCOMMIT_GUESS:

 

1

2

3

4

5

源文件:source/include/linux/mman.h

 

#define OVERCOMMIT_GUESS                0

#define OVERCOMMIT_ALWAYS               1

#define OVERCOMMIT_NEVER                2

Heuristic overcommit算法在以下函数中实现,基本上可以这么理解:
单次申请的内存大小不能超过 【free memory + free swap + pagecache的大小 + SLAB中可回收的部分】,否则本次申请就会失败。

 

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

源文件:source/mm/mmap.c 以RHEL内核2.6.32-642为例

 

0120 /*

0121  * Check that a process has enough memory to allocate a new virtual

0122  * mapping. 0 means there is enough memory for the allocation to

0123  * succeed and -ENOMEM implies there is not.

0124  *

0125  * We currently support three overcommit policies, which are set via the

0126  * vm.overcommit_memory sysctl.  See Documentation/vm/overcommit-accounting

0127  *

0128  * Strict overcommit modes added 2002 Feb 26 by Alan Cox.

0129  * Additional code 2002 Jul 20 by Robert Love.

0130  *

0131  * cap_sys_admin is 1 if the process has admin privileges, 0 otherwise.

0132  *

0133  * Note this is a helper function intended to be used by LSMs which

0134  * wish to use this logic.

0135  */

0136 int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin)

0137 {

0138         unsigned long free, allowed;

0139

0140         vm_acct_memory(pages);

0141

0142         /*

0143          * Sometimes we want to use more memory than we have

0144          */

0145         if (sysctl_overcommit_memory == OVERCOMMIT_ALWAYS)

0146                 return 0;

0147

0148         if (sysctl_overcommit_memory == OVERCOMMIT_GUESS) { //Heuristic overcommit算法开始

0149                 unsigned long n;

0150

0151                 free = global_page_state(NR_FILE_PAGES); //pagecache汇总的页面数量

0152                 free += get_nr_swap_pages(); //free swap的页面数

0153

0154                 /*

0155                  * Any slabs which are created with the

0156                  * SLAB_RECLAIM_ACCOUNT flag claim to have contents

0157                  * which are reclaimable, under pressure.  The dentry

0158                  * cache and most inode caches should fall into this

0159                  */

0160                 free += global_page_state(NR_SLAB_RECLAIMABLE); //SLAB可回收的页面数

0161

0162                 /*

0163                  * Reserve some for root

0164                  */

0165                 if (!cap_sys_admin)

0166                         free -= sysctl_admin_reserve_kbytes >> (PAGE_SHIFT - 10); //给root用户保留的页面数

0167

0168                 if (free > pages)

0169                         return 0;

0170

0171                 /*

0172                  * nr_free_pages() is very expensive on large systems,

0173                  * only call if we're about to fail.

0174                  */

0175                 n = nr_free_pages(); //当前free memory页面数

0176

0177                 /*

0178                  * Leave reserved pages. The pages are not for anonymous pages.

0179                  */

0180                 if (n <= totalreserve_pages)

0181                         goto error;

0182                 else

0183                         n -= totalreserve_pages;

0184

0185                 /*

0186                  * Leave the last 3% for root

0187                  */

0188                 if (!cap_sys_admin)

0189                         n -= n / 32;

0190                 free += n;

0191

0192                 if (free > pages)

0193                         return 0;

0194

0195                 goto error;

0196         }

0197

0198         allowed = vm_commit_limit();

0199         /*

0200          * Reserve some for root

0201          */

0202         if (!cap_sys_admin)

0203                 allowed -= sysctl_admin_reserve_kbytes >> (PAGE_SHIFT - 10);

0204

0205         /* Don't let a single process grow too big:

0206            leave 3% of the size of this process for other processes */

0207         if (mm)

0208                 allowed -= mm->total_vm / 32;

0209

0210         if (percpu_counter_read_positive(&vm_committed_as) < allowed)

0211                 return 0;

0212 error:

0213         vm_unacct_memory(pages);

0214

0215         return -ENOMEM;

0216 }

 

参考:
https://www.kernel.org/doc/Documentation/vm/overcommit-accounting
https://www.win.tue.nl/~aeb/linux/lk/lk-9.html
https://www.kernel.org/doc/Documentation/sysctl/vm.txt
http://lwn.net/Articles/28345/

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值