原文由自在棋子发表于搜狐博客: 前往查看
最近在eclipse开发中用到正则表达式搜索替换,顺便总结。
搜索:^(.*)<h:outputText.*value=.*"#\{(.*)\}"(.*)$
替换:$1<h:outputText value= "#{strings.trim($2,30)}"$3
实现的功能是能找到代码中类似:
<h:outputText value="#{appl.departmentName}" />
的行。并替换为:
<h:outputText value= "#{strings.trim(appl.applicantName,30)}" />
在上一组搜索表达式基础上作了些改进:
搜索:^(.*)<h:outputText(.*\R??.*)value=\p{Space}*"#\{(.*)\}"(.*)$
替换:$1<h:outputText$2value="#{strings.trim($3,30)}"$4
这组条件考虑到了中间带换行的情况。
这种正则表达式的编写有3个问题要注意:
1.有些特殊字符需要转意。例如:{ ( 这种字符被正则表达式语法赋予了新意义,因此要用\{ \( 来代表原字符。
2.用( )对来截取字段中需要保留的变化部分。再用$1 , $2 , $3 ...$n 在替换字段里复用他们。
3.注意eclipse里的换行是 \R ,不是下面文档里的 \r 。
以下是正则表达式语法的详细列举:
x | The character x |
\\ | The backslash character |
\0n | The character with octal value 0n (0 <= n <= 7) |
\0nn | The character with octal value 0nn (0 <= n <= 7) |
\0mnn | The character with octal value 0mnn (0 <= m <= 3, 0 <= n <= 7) |
\xhh | The character with hexadecimal value 0xhh |
\uhhhh | The character with hexadecimal value 0xhhhh |
\t | The tab character ('\ ') |
\n | The newline (line feed) character ('\ ') |
\r | The carriage-return character ('\ ') |
\f | The form-feed character ('\ ') |
\a | The alert (bell) character ('\\u0007') |
\e | The escape character ('\\u001B') |
\cx | The control character corresponding to x |
[abc] | a, b, or c (simple class) |
[^abc] | Any character except a, b, or c (negation) |
[a-zA-Z] | a through z or A through Z, inclusive (range) |
[a-d[m-p]] | a through d, or m through p: [a-dm-p] (union) |
[a-z&&[def]] | d, e, or f (intersection) |
[a-z&&[^bc]] | a through z, except for b and c: [ad-z] (subtraction) |
[a-z&&[^m-p]] | a through z, and not m through p: [a-lq-z](subtraction) |
. | Any character (may or may not match line terminators) |
\d | A digit: [0-9] |
\D | A non-digit: [^0-9] |
\s | A whitespace character: [ \t\n\x0B\f\r] |
\S | A non-whitespace character: [^\s] |
\w | A word character: [a-zA-Z_0-9] |
\W | A non-word character: [^\w] |
\p{Lower} | A lower-case alphabetic character: [a-z] |
\p{Upper} | An upper-case alphabetic character:[A-Z] |
\p{ASCII} | All ASCII:[\x00-\x7F] |
\p{Alpha} | An alphabetic character:[\p{Lower}\p{Upper}] |
\p{Digit} | A decimal digit: [0-9] |
\p{Alnum} | An alphanumeric character:[\p{Alpha}\p{Digit}] |
\p{Punct} | Punctuation: One of !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~ |
\p{Graph} | A visible character: [\p{Alnum}\p{Punct}] |
\p{Print} | A printable character: [\p{Graph}] |
\p{Blank} | A space or a tab: [ \t] |
\p{Cntrl} | A control character: [\x00-\x1F\x7F] |
\p{XDigit} | A hexadecimal digit: [0-9a-fA-F] |
\p{Space} | A whitespace character: [ \t\n\x0B\f\r] |
\p{InGreek} | A character in the Greek block (simple block) |
\p{Lu} | An uppercase letter (simple category) |
\p{Sc} | A currency symbol |
\P{InGreek} | Any character except one in the Greek block (negation) |
[\p{L}&&[^\p{Lu}]] | Any letter except an uppercase letter (subtraction) |
^ | The beginning of a line |
$ | The end of a line |
\b | A word boundary |
\B | A non-word boundary |
\A | The beginning of the input |
\G | The end of the previous match |
\Z | The end of the input but for the final terminator, if any |
\z | The end of the input |
X? | X, once or not at all |
X* | X, zero or more times |
X+ | X, one or more times |
X{n} | X, exactly n times |
X{n,} | X, at least n times |
X{n,m} | X, at least n but not more than m times |
X?? | X, once or not at all |
X*? | X, zero or more times |
X+? | X, one or more times |
X{n}? | X, exactly n times |
X{n,}? | X, at least n times |
X{n,m}? | X, at least n but not more than m times |
X?+ | X, once or not at all |
X*+ | X, zero or more times |
X++ | X, one or more times |
X{n}+ | X, exactly n times |
X{n,}+ | X, at least n times |
X{n,m}+ | X, at least n but not more than m times |
XY | X followed by Y |
X|Y | Either X or Y |
(X) | X, as a capturing group |
\n | Whatever the nth capturing group matched |
\ | Nothing, but quotes the following character |
\Q | Nothing, but quotes all characters until \E |
\E | Nothing, but ends quoting started by \Q |
(?:X) | X, as a non-capturing group |
(?idmsux-idmsux) | Nothing, but turns match flags on - off |
(?idmsux-idmsux:X) | X, as a non-capturing group with the given flags on - off |
(?=X) | X, via zero-width positive lookahead |
(?!X) | X, via zero-width negative lookahead |
(?<=X) | X, via zero-width positive lookbehind |
(?<!X) | X, via zero-width negative lookbehind |
(?>X) | X, as an independent, non-capturing group |