转载自:http://peirenlei.iteye.com/blog/518666
STL map的使用方法
关键字: stl map 用法
一 map内部数据的组织
map内部自建一颗红黑树(一种非严格意义上的平衡二叉树),这颗树具有对数据自动排序的功能,所以在map内部所有的数据都是有序的,后边我们会见识到有序的好处。
二 map的构造函数
map共提供了6个构造函数,这块涉及到内存分配器这些东西,略过不表,在下面我们将接触到一些map的构造方法,这里要说下的就是,我们通常用如下方法构造一个map:
Map<int, string> mapStudent;
三 数据的插入
在构造map容器后,我们就可以往里面插入数据了。这里讲三种插入数据的方法:
第一种:用insert函数插入pair数据,下面举例说明(以下代码虽然是随手写的。在VC下请加入这条语句,屏蔽4786警告 #pragma warning (disable:4786) )
Map<int, string> mapStudent;
mapStudent.insert(pair<int, string>(1, “student_one”));
mapStudent.insert(pair<int, string>(2, “student_two”));
mapStudent.insert(pair<int, string>(3, “student_three”));
map<int, string>::iterator iter;
for(iter = mapStudent.begin(); iter != mapStudent.end(); iter++)
第二种:用insert函数插入value_type数据,下面举例说明
Map<int, string> mapStudent;
mapStudent.insert(map<int, string>::value_type (1, “student_one”));
mapStudent.insert(map<int, string>::value_type (2, “student_two”));
mapStudent.insert(map<int, string>::value_type (3, “student_three”));
map<int, string>::iterator iter;
for(iter = mapStudent.begin(); iter != mapStudent.end(); iter++)
cout<<iter->first<<” ”<<iter->second<<end;
第三种:用数组方式插入数据
Map<int, string> mapStudent;
mapStudent[1] = “student_one”;
mapStudent[2] = “student_two”;
mapStudent[3] = “student_three”;
区别:第一种和第二种在效果上是完成一样的,用insert函数插入数据,在数据的插入上涉及到集合的唯一性这个概念,即当map中有这个关键字时,insert操作是插入数据不了的;但是用数组方式就不同了,它可以覆盖以前该关键字对应的值,用程序说明
mapStudent.insert(map<int, string>::value_type (1, “student_one”));
mapStudent.insert(map<int, string>::value_type (1, “student_two”));
验证插入的成功性:上面这两条语句执行后,map中1这个关键字对应的值是“student_one”,第二条语句并没有生效,那么这就涉及到我们怎么知道insert语句是否插入成功的问题了,可以用pair来获得是否插入成功,通过pair的第二个变量来知道是否插入成功,它的第一个变量返回的是一个map的迭代器,如果插入成功的话Insert_Pair.second应该是true的,否则为false。
程序如下
Pair<map<int, string>::iterator, bool> Insert_Pair;
Insert_Pair = mapStudent.insert(map<int, string>::value_type (1, “student_one”));
Map<int, string> mapStudent;
Pair<map<int, string>::iterator, bool> Insert_Pair;
Insert_Pair = mapStudent.insert(pair<int, string>(1, “student_one”));
if(Insert_Pair.second == true)
{
Cout<<”Insert Successfully”<<endl;
}
else
{
Cout<<”Insert Failure”<<endl;
}
数组插入在数据覆盖上的效果
mapStudent[1] = “student_one”;
mapStudent[1] = “student_two”;
三. map的大小
int nSize = mapStudent.size();
四. 数据的遍历
第一种:应用前向迭代器,上面举例程序中到处都是了,略过不表
第二种:应用反相迭代器,下面举例说明,要体会效果,请自个动手运行程序
map<int, string>::reverse_iterator iter;
for(iter = mapStudent.rbegin(); iter != mapStudent.rend(); iter++)
{
Cout<<iter->first<<” ”<<iter->second<<end;
}
第三种:用数组方式,程序说明如下
int nSize = mapStudent.size()
for(int nIndex = 0; nIndex < nSize; nIndex++)
{
Cout<<mapStudent[nIndex]<<end;
}
五. 数据的查找(包括判定这个关键字是否在map中出现)
第一种:用count函数来判定关键字是否出现,其缺点是无法定位数据出现位置,由于map的特性,一对一的映射关系,就决定了count函数的返回值只有两个,要么是0,要么是1,出现的情况,当然是返回1了
第二种:用find函数来定位数据出现位置,它返回的一个迭代器,当数据出现时,它返回数据所在位置的迭代器,如果map中没有要查找的数据,它返回的迭代器等于end函数返回的迭代器,程序说明
mapStudent.insert(pair<int, string>(1, “student_one”));
mapStudent.insert(pair<int, string>(2, “student_two”));
mapStudent.insert(pair<int, string>(3, “student_three”));
map<int, string>::iterator iter;
iter = mapStudent.find(1);
if(iter != mapStudent.end())
{
Cout<<”Find, the value is ”<<iter->second<<endl;
}
else
{
Cout<<”Do not Find”<<endl;
}
第三种:这个方法用来判定数据是否出现,是显得笨了点,但是,我打算在这里讲解
Lower_bound函数用法,这个函数用来返回要查找关键字的下界(是一个迭代器)
Upper_bound函数用法,这个函数用来返回要查找关键字的上界(是一个迭代器)
例如:map中已经插入了1,2,3,4的话,如果lower_bound(2)的话,返回的2,而upper-bound(2)的话,返回的就是3
equal_range函数返回一个pair,pair里面第一个变量是Lower_bound返回的迭代器,pair里面第二个迭代器是Upper_bound返回的迭代器,如果这两个迭代器相等的话,则说明map中不出现这个关键字,程序说明
iter = mapStudent.lower_bound(3);
{
//返回的是下界3的迭代器
Cout<<iter->second<<endl;
}
iter = mapStudent.upper_bound(2);
{
//返回的是上界3的迭代器
Cout<<iter->second<<endl;
}
Pair<map<int, string>::iterator, map<int, string>::iterator> mapPair;
mapPair = mapStudent.equal_range(2);
if(mapPair.first == mapPair.second)
{
cout<<”Do not Find”<<endl;
}
Else
{
Cout<<”Find”<<endl;
}
六. 数据的清空与判空
清空map中的数据可以用clear()函数,判定map中是否有数据可以用empty()函数,它返回true则说明是空map
七. 数据的删除
这里要用到erase函数,它有三个重载了的函数,下面在例子中详细说明它们的用法
map<int, string>::iterator iter;
iter = mapStudent.find(1);
mapStudent.erase(iter);
//如果要删除1,用关键字删除
Int n = mapStudent.erase(1);//如果删除了会返回1,否则返回0
//用迭代器,成片的删除
//一下代码把整个map清空
mapStudent.earse(mapStudent.begin(), mapStudent.end());
//成片删除要注意的是,也是STL的特性,删除区间是一个前闭后开的集合
八. 其他一些函数用法
这里有swap,key_comp,value_comp,get_allocator等函数,感觉到这些函数在编程用的不是很多,略过不表,有兴趣的话可以自个研究
六. 排序
这里要讲的是一点比较高深的用法了,排序问题,STL中默认是采用小于号来排序的,以上代码在排序上是不存在任何问题的,因为上面的关键字是int型,它本身支持小于号运算,在一些特殊情况,比如关键字是一个结构体,涉及到排序就会出现问题,因为它没有小于号操作,insert等函数在编译的时候过不去,下面给出两个方法解决这个问题
第一种:小于号重载,程序举例
Typedef struct tagStudentInfo
{
Int nID;
String strName;
bool operator < (tagStudentInfo const& _A) const
{
//这个函数指定排序策略,按nID排序,如果nID相等的话,按strName排序
If(nID < _A.nID) return true;
If(nID == _A.nID) return strName.compare(_A.strName) < 0;
Return false;
}
}StudentInfo, *PStudentInfo; //学生信息
第二种:仿函数的应用,这个时候结构体中没有直接的小于号重载,程序说明
Typedef struct tagStudentInfo
{
Int nID;
String strName;
}StudentInfo, *PStudentInfo; //学生信息
Classs sort
{
Public:
Bool operator() (StudentInfo const &_A, StudentInfo const &_B) const
{
If(_A.nID < _B.nID) return true;
If(_A.nID == _B.nID) return _A.strName.compare(_B.strName) < 0;
Return false;
}
};
Int main()
{
//用学生信息映射分数
Map<StudentInfo, int, sort>mapStudent;
StudentInfo studentInfo;
studentInfo.nID = 1;
studentInfo.strName = “student_one”;
mapStudent.insert(pair<StudentInfo, int>(studentInfo, 90));
studentInfo.nID = 2;
studentInfo.strName = “student_two”;
mapStudent.insert(pair<StudentInfo, int>(studentInfo, 80));
}
十. 另外
由于STL是一个统一的整体,map的很多用法都和STL中其它的东西结合在一起,比如在排序上,这里默认用的是小于号,即less<>,如果要从大到小排序呢,这里涉及到的东西很多,在此无法一一加以说明。
还要说明的是,map中由于它内部有序,由红黑树保证,因此很多函数执行的时间复杂度都是log2N的,如果用map函数可以实现的功能,而STL Algorithm也可以完成该功能,建议用map自带函数,效率高一些。
下面说下,map在空间上的特性,否则,估计你用起来会有时候表现的比较郁闷,由于map的每个数据对应红黑树上的一个节点,这个节点在不保存你的数据时,是占用16个字节的,一个父节点指针,左右孩子指针,还有一个枚举值(标示红黑的,相当于平衡二叉树中的平衡因子)。