TimerLock 2.6

1. Install Windows Vista without entering any product key. If you have already installed Windows Vista, make sure you don’t use up the 3 times legal rearm limit. Anyway, version 5 will ensure that TimerStop driver is installed even though rearm allowances have been used up.
2. After installation setup complete, boot up Windows Vista system with user id with administrator rights.
3. Disconnect from Internet if necessary.
4. Turn off UAC. (Not necessary required since version 2.0, try only if unsuccessful)
5. Extract the TimerLock.zip or TimerLockSetup.zip to a folder.
6. Run install.bat or TimerLockSetup.exe.
7. When prompted to restart computer, press OK.
8. System should prompt that the patch was installed properly. If not check your system date if it has properly set back.
9. Optional: If you have problem that the activation timer counts down between restarts or reboots, manually apply 2099 trick.
10. Check if your activation remaining timer still counting down with slmgr.vbs -dlv command in elevated command prompt.

http://depositfiles.com/files/664140