转载链接:http://blog.sina.com.cn/s/blog_87c063060101l25y.html
注:还有很多不理解的地方,而且内核版本和目前所看的不同,内容有出入
在编译构建性目标时(如 make vmlinux),顶层 Makefile 的 $(dot-config) 变量值为 1 。
在顶层 Makefile 的 497-504 行看到:
ifeq ($(dot-config),1)
# Read in config
-include include/config/auto.conf
ifeq ($(KBUILD_EXTMOD),)
# Read in dependencies to all Kconfig* files, make sure to run
# oldconfig if changes are detected.
-include include/config/auto.conf.cmd
# To avoid any implicit rule to kick in, define an empty command
$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
# If .config is newer than include/config/auto.conf, someone tinkered
# with it and forgot to run make oldconfig.
# if auto.conf.cmd is missing then we are probably in a cleaned tree so
# we execute the config step to be sure to catch updated Kconfig files
include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
其中,
引用
-include include/config/auto.conf
-include include/config/auto.conf.cmd
这两行尝试包含 auto.conf 和 auto.conf.cmd 这两个文件。由于使用 -include 进行声明,所以即使这两个文件不存在也不会报错退出,比如在第 1 次编译内核,且已经配置好 .config 文件时,这两个文件还未生成。
假如我们已经编译好了 vmlinux 这个目标,那么我们会在 include/config 这个目录下看到 auto.conf 和 auto.conf.cmd 这两个文件。
从 include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd 这条语句可以知道,auto.conf 文件依赖于 $(KCONFIG_CONFIG) 和 include/config/auto.conf.cmd 。其中 $(KCONFIG_CONFIG) 变量的值就是 .config 这个配置文件。那么 include/config/auto.conf.cmd 这个文件应该在什么时候生成?
现在仍然假设 auto.conf 和 auto.conf.cmd 还没有生成,那么由上面的\$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ; 这条语句知道,该语句中的目标没有依赖,也没有生成它的规则命令,所以可想 GNU Make 本身无法生成 auto.conf.cmd 的。然后该条语句后面的一个分号表明,这两个目标被强制是最新的,所以下面这条命令得以执行:
$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
这里我们看到要生成一个目标 silentoldconfig ,这个目标定义在 scripts/kconfig/Makefile 中。因为这里使用 -f 选项重新指定了顶层 Makefile,而目标又是 silentoldconfig ,所以该命令最终会在顶层 Makefile 的 462-464 这里执行
%config: scripts_basic outputmakefile FORCE
$(Q)mkdir -p include/linux include/config
$(Q)$(MAKE) $(build)=scripts/kconfig $@
这时,我们来到 scripts/kconfig/Makefile 文件里。在该文件的 32-34 行看到:
silentoldconfig: $(obj)/conf
$(Q)mkdir -p include/generated
$< -s $(Kconfig)
从上面看到,silentoldconfig 目标需要依赖 conf 这个程序,该程序也在 scripts/kconfig 目录下生成。$< -s $(Kconfig) 该条命令相当于 conf -s $(Kconfig) ,这里 $(Kconfig) 是位于不同平台目录下的 Kconfig 文件,比如在 x86 平台就是 arch/x86/Kconfig 。
conf 程序的源代码的主函数在同目录的 conf.c 文件中,在 main() 函数中看到:
while ((opt = getopt(ac, av, "osdD:nmyrh")) != -1) {
switch (opt) {
case 'o':
input_mode = ask_silent;
break;
case 's':
input_mode = ask_silent;
sync_kconfig = 1;
break;
所以,在使用 s 参数时,sync_kconfig 这个变量会为 1 。同样在 main() 函数还看到:
if (sync_kconfig) {
name = conf_get_configname();
if (stat(name, &tmpstat)) {
fprintf(stderr, _("***\n"
"*** You have not yet configured your kernel!\n"
"*** (missing kernel config file \"%s\")\n"
"***\n"
"*** Please run some configurator (e.g. \"make oldconfig\" or\n"
"*** \"make menuconfig\" or \"make xconfig\").\n"
"***\n"), name);
exit(1);
}
}
上面代码中,如果我们从未配置过内核,那么就会打印出错误信息,然后退出。这里假设已经配置过内核,并生成了 .config 文件,那么在 main() 函数中会来到:
switch (input_mode) {
case set_default:
if (!defconfig_file)
defconfig_file = conf_get_default_confname();
if (conf_read(defconfig_file)) {
printf(_("***\n"
"*** Can't find default configuration \"%s\"!\n"
"***\n"), defconfig_file);
exit(1);
}
break;
case ask_silent:
case ask_all:
case ask_new:
conf_read(NULL);
break;
由于使用 s 选项,则 input_mode 为 ask_silent,所以这里会执行 conf_read(NULL); 函数。conf_read(NULL); 函数用来读取 .config 文件。读取的各种相关内容主要存放在一个 struct symbol 结构链表里,而各个结构的相关指针则放在一个 symbol_hash[] 的数组中,对于数组中元素的寻找通过 fnv32 哈希算法进行定位。
最后会来到 conf.c 中的底部:
if (sync_kconfig) {
if (conf_get_changed() && conf_write(NULL)) {
fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
exit(1);
}
if (conf_write_autoconf()) {
fprintf(stderr, _("\n*** Error during update of the kernel configuration.\n\n"));
return 1;
}
} else {
if (conf_write(NULL)) {
fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
exit(1);
}
}
实际上也只有当处理 silentoldconfig 目标是 sync_kconfig 变量才会为 1 。上面代码中的 conf_write_autoconf() 函数就用来生成 auto.conf, auto.conf.cmd 以及 autoconf.h 这 3 个文件。
在 if (conf_get_changed() && conf_write(NULL)) 这个判断里,conf_get_changed() 函数判断 .config 文件是否做过变动,如果是,那么会调用 conf_write(NULL) 来重新写 .config 文件。实际上,对于 defconfig, oldconfig, menuconfig 等目标来说,conf 程序最终也是调用 conf_write() 函数将配置结果写入 .config 文件中(最后那个 else 里的内容便是)。
确保了 .config 已经最新后,那么调用 conf_write_autoconf() 生成 auto.conf,auto.conf.cmd 以及 autoconf.h 这 3 个文件。
来到 conf_write_autoconf() 函数:
在 conf_write_autoconf() 里,调用 file_write_dep(“include/config/auto.conf.cmd”); 函数将相关内容写入 auto.conf.cmd 文件。在生成的 auto.conf.cmd 文件中可以看到:
include/config/auto.conf: \
$(deps_config)
可以看到 auto.conf 文件中的内容依赖于 $(deps_config) 变量里定义的东西,这些东西基本上是各个目录下的 Kconfig 以及其它一些相关文件。
auto.config 和 .config 的差别是在 auto.config 里去掉了 .config 中的注释项目以及空格行,其它的都一样。
仍然在 conf_write_autoconf() 里,分别建立了 .tmpconfig,.tmpconfig_tristate 和 .tmpconfig.h 这 3 个临时文件:
out = fopen(".tmpconfig", "w");
if (!out)
return 1;
tristate = fopen(".tmpconfig_tristate", "w");
if (!tristate) {
fclose(out);
return 1;
}
out_h = fopen(".tmpconfig.h", "w");
if (!out_h) {
fclose(out);
fclose(tristate);
return 1;
}
然后将文件头的注释部分分别写入到这几个临时文件中:
sym = sym_lookup("KERNELVERSION", 0);
sym_calc_value(sym);
time(&now);
fprintf(out, "#\n"
"# Automatically generated make config: don't edit\n"
"# Linux kernel version: %s\n"
"# %s"
"#\n",
sym_get_string_value(sym), ctime(&now));
fprintf(tristate, "#\n"
"# Automatically generated - do not edit\n"
"\n");
fprintf(out_h, "\n"
"#define AUTOCONF_INCLUDED\n",
sym_get_string_value(sym), ctime(&now));
接着在 for_all_symbols(i, sym) 这个循环里(是一个宏)里将相关内容分别写入到这几个文件中。
在最后一段代码中,将这几个临时文件进行改名:
name = getenv("KCONFIG_AUTOHEADER");
if (!name)
name = "include/generated/autoconf.h";
if (rename(".tmpconfig.h", name))
return 1;
name = getenv("KCONFIG_TRISTATE");
if (!name)
name = "include/config/tristate.conf";
if (rename(".tmpconfig_tristate", name))
return 1;
name = conf_get_autoconfig_name();
if (rename(".tmpconfig", name))
return 1;
上面代码中的 conf_get_autoconfig_name() 实现为:
const char *conf_get_autoconfig_name(void)
{
char *name = getenv("KCONFIG_AUTOCONFIG");
return name ? name : "include/config/auto.conf";
}
从上面可以看到,分别生成了以下几个文件:
引用
include/generated/autoconf.h
include/config/tristate.conf
include/config/auto.conf
其中 include/generated/autoconf.h 头文件由内核本身使用,主要用来预处理 C 代码。比如在 .config 或 auto.conf 中定义要编译为模块的项,如:
CONFIG_DEBUG_NX_TEST=m
在 autoconf.h 中会被定义为:
#define CONFIG_DEBUG_NX_TEST_MODULE 1
在 .config 或 auto.conf 后接字符串值的项,如:
CONFIG_DEFCONFIG_LIST=”/lib/modules/$UNAME_RELEASE/.config”
在 autoconfig.h 中会被定义为:
#define CONFIG_DEFCONFIG_LIST “/lib/modules/$UNAME_RELEASE/.config”
同样对应于 int 型的项如 CONFIG_HZ=1000 在 autoconf.h 中被定义为 #define CONFIG_HZ 1000 。