delphi获取硬盘序列号的dll代码，支持win7

library GetDiskSN;


{ Important note about DLL memory management: ShareMem must be the
  first unit in your library's USES clause AND your project's (select
  Project-View Source) USES clause if your DLL exports any procedures or
  functions that pass strings as parameters or function results. This
  applies to all strings passed to and from your DLL--even those that
  are nested in records and classes. ShareMem is the interface unit to
  the BORLNDMM.DLL shared memory manager, which must be deployed along
  with your DLL. To avoid using BORLNDMM.DLL, pass string information
  using PChar or ShortString parameters. }


uses
  SysUtils,
  Classes,
  Windows;


{$R *.res}
function GetIdeSerialNumber: PChar;
const
  IDENTIFY_BUFFER_SIZE = 512;
type
  TIDERegs = packed record
    bFeaturesReg: Byte;     // Used for specifying SMART "commands".
    bSectorCountReg: Byte;  // IDE sector count register
    bSectorNumberReg: Byte; // IDE sector number register
    bCylLowReg: Byte;       // IDE low order cylinder value
    bCylHighReg: Byte;      // IDE high order cylinder value
    bDriveHeadReg: Byte;    // IDE drive/head register
    bCommandReg: Byte;      // Actual IDE command.
    bReserved: Byte;        // reserved for future use. Must be zero.
  end;
  TSendCmdInParams = packed record
    // Buffer size in bytes
    cBufferSize: Longword;
    // Structure with drive register values.
    irDriveRegs: TIDERegs;
    // Physical drive number to send command to (0,1,2,3).
    bDriveNumber: Byte;
    bReserved: array[0..2] of Byte;
    dwReserved: array[0..3] of Longword;
    bBuffer: array[0..0] of Byte; // Input buffer.
  end;
  TIdSector = packed record
    wGenConfig: Word;
    wNumCyls: Word;
    wReserved: Word;
    wNumHeads: Word;
    wBytesPerTrack: Word;
    wBytesPerSector: Word;
    wSectorsPerTrack: Word;
    wVendorUnique: array[0..2] of Word;
    sSerialNumber: array[0..19] of Char;
    wBufferType: Word;
    wBufferSize: Word;
    wECCSize: Word;
    sFirmwareRev: array[0..7] of Char;
    sModelNumber: array[0..39] of Char;
    wMoreVendorUnique: Word;
    wDoubleWordIO: Word;
    wCapabilities: Word;
    wReserved1: Word;
    wPIOTiming: Word;
    wDMATiming: Word;
    wBS: Word;
    wNumCurrentCyls: Word;
    wNumCurrentHeads: Word;
    wNumCurrentSectorsPerTrack: Word;
    ulCurrentSectorCapacity: Longword;
    wMultSectorStuff: Word;
    ulTotalAddressableSectors: Longword;
    wSingleWordDMA: Word;
    wMultiWordDMA: Word;
    bReserved: array[0..127] of Byte;
  end;
  PIdSector     = ^TIdSector;
  TDriverStatus = packed record
    // 驱动器返回的错误代码，无错则返回0
    bDriverError: Byte;
    // IDE出错寄存器的内容，只有当bDriverError 为 SMART_IDE_ERROR 时有效
    bIDEStatus: Byte;
    bReserved: array[0..1] of Byte;
    dwReserved: array[0..1] of Longword;
  end;
  TSendCmdOutParams = packed record
    // bBuffer的大小
    cBufferSize: Longword;
    // 驱动器状态
    DriverStatus: TDriverStatus;
    // 用于保存从驱动器读出的数据的缓冲区，实际长度由cBufferSize决定
    bBuffer: array[0..0] of Byte;
  end;
var
  hDevice: THandle;
  cbBytesReturned: Longword;
  SCIP: TSendCmdInParams;
  aIdOutCmd: array[0..(SizeOf(TSendCmdOutParams) + IDENTIFY_BUFFER_SIZE - 1) - 1] of
    Byte;
  IdOutCmd: TSendCmdOutParams absolute aIdOutCmd;
  procedure ChangeByteOrder(var Data; Size: Integer);
  var
    Ptr: PChar;
    i: Integer;
    c: Char;
  begin
    Ptr := @Data;
    for I := 0 to (Size shr 1) - 1 do
    begin
      c          := Ptr^;
      Ptr^       := (Ptr + 1)^;
      (Ptr + 1)^ := c;
      Inc(Ptr, 2);
    end;
  end;
begin
  Result := ''; // 如果出错则返回空串
  if SysUtils.Win32Platform = VER_PLATFORM_WIN32_NT then
  begin // Windows NT, Windows 2000
        // 提示! 改变名称可适用于其它驱动器，如第二个驱动器： '\\.\PhysicalDrive1\'
    hDevice := CreateFile('\\.\PhysicalDrive0', GENERIC_READ or GENERIC_WRITE,
      FILE_SHARE_READ or FILE_SHARE_WRITE, nil, OPEN_EXISTING, 0, 0);
  end
  else // Version Windows 95 OSR2, Windows 98
    hDevice := CreateFile('\\.\SMARTVSD', 0, 0, nil, CREATE_NEW, 0, 0);
  if hDevice = INVALID_HANDLE_VALUE then
    Exit;
  try
    FillChar(SCIP, SizeOf(TSendCmdInParams) - 1, #0);
    FillChar(aIdOutCmd, SizeOf(aIdOutCmd), #0);
    cbBytesReturned := 0;
    // Set up data structures for IDENTIFY command.
    with SCIP do
    begin
      cBufferSize := IDENTIFY_BUFFER_SIZE;
      // bDriveNumber := 0;
      with irDriveRegs do
      begin
        bSectorCountReg := 1;
        bSectorNumberReg := 1;
        // if Win32Platform=VER_PLATFORM_WIN32_NT then bDriveHeadReg := $A0
        // else bDriveHeadReg := $A0 or ((bDriveNum and 1) shl 4);
        bDriveHeadReg := $A0;
        bCommandReg := $EC;
      end;
    end;
    if not DeviceIoControl(hDevice, $0007C088, @SCIP,
      SizeOf(TSendCmdInParams) - 1, @aIdOutCmd, SizeOf(aIdOutCmd),
      cbBytesReturned, nil) then
      Exit;
  finally
    CloseHandle(hDevice);
  end;
  with PIdSector(@IdOutCmd.bBuffer)^ do
  begin
    ChangeByteOrder(sSerialNumber, SizeOf(sSerialNumber));
    (PChar(@sSerialNumber) + SizeOf(sSerialNumber))^ := #0;
    Result := PChar(@sSerialNumber);
  end;
end;
exports
GetIdeSerialNumber index 1;
begin
end.