ubuntu下开始自动挂载硬盘分区

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#

#第1列是需要挂载的文件系统或存储设备，这里为我Windows上的G盘，分区为/dev/sda8.
#第2列是挂载点
#第3列指定文件系统或分区的类型
# 第4列为挂载选项，详细参考man mount. 下面列出一些常用的选项：
#   auto: 系统自动挂载，fstab默认就是这个选项
#   ro: read-only
#   rw: read-write
#   defaults: rw, suid, dev, exec, auto, nouser, and async.
#第5列为dump选项，设置是否让备份程序dump备份文件系统，0为忽略，1为备份。
# 第6列为fsck选项，告诉fsck程序以什么顺序检查文件系统，0为忽略

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sda10 during installation
UUID=a7fe1b7b-3432-4c10-952e-983a2f6069c7 /               ext4    errors=remount-ro 0       1
# /boot was on /dev/sda8 during installation
UUID=67777a60-3649-4944-8798-b3932e3ff309 /boot           ext4    defaults        0       2
# swap was on /dev/sda9 during installation
UUID=81153da7-3296-4c3b-8781-7b9bf0c2625e none            swap    sw              0       0

#add by myself 
#C:Windows7 was on /dev/sda1 
UUID=3CD402A4D402610E /media/Windows7           auto    defaults        0       0

#D: SoftWare /dev/sda5
UUID=000FEF31000386BD /media/SoftWare           auto    defaults        0       0


#E: Media /dev/sda6
UUID=000AB29A000005C8 /media/Media           auto    defaults        0       0


#F: Document /dev/sda7
UUID=C04A65BE4A65B1B8 /media/Document           auto    defaults        0       0