进程是处于执行期的程序以及它所管理的资源(如打开的文件、挂起的信号、进程状态、地址空间等等)的总称。注意,程序并不是进程,实际上两个或多个进程不仅有可能执行同一程序,而且还有可能共享地址空间等资源。 Linux 内核通过一个被称为进程描述符的task_struct结构体来管理进程,这个结构体包含了一个进程所需的所有信息。它定义在linux-2.6.38.8/include/linux/sched.h文件中。在linux 中每一个进程都由task_struct 数据结构 来定义. task_struct就是我们通常所说的PCB.她是对进程控制的唯一手段也是最有效的手段. 当我们调用fork() 时, 系统会为我们产生一个task_struct结构.然后从父进程,那里继承一些数据, 并把新的进程插入到进程树中, 以待进行进程管理.因此了解task_struct的结构对于我们理解任务调度(在linux 中任务和进程是同一概念)的关键.在进行剖析task_struct的定义之前. 我们先按照我们的理论推一下它的结构.
1, 进程状态 ,将纪录进程在等待,运行,或死锁
2, 调度信息, 由哪个调度函数调度,怎样调度等
3, 进程的通讯状况
4,因为要插入进程树,必须有联系父子兄弟的指针, 当然是task_struct型
5,时间信息, 比如计算好执行的时间, 以便cpu 分配
6,标号 ,决定改进程归属
7,可以读写打开的一些文件信息
8, 进程上下文和内核上下文
9,处理器上下文
10,内存信息 因为每一个PCB都是这样的, 只有这些结构, 才能满足一个进程的所有要求.
本文将尽力就task_struct结构体所有成员的用法进行简要说明。
volatile long state; int exit_state;
state成员的可能取值如下:
#define TASK_RUNNING 0 #define TASK_INTERRUPTIBLE 1 #define TASK_UNINTERRUPTIBLE 2 #define __TASK_STOPPED 4 #define __TASK_TRACED 8 #define EXIT_ZOMBIE 16 #define EXIT_DEAD 32 #define TASK_DEAD 64 #define TASK_WAKEKILL 128 #define TASK_WAKING 256
系统中的每个进程都必然处于以上所列进程状态中的一种。
EXIT_ZOMBIE和EXIT_DEAD也可以存放在exit_state成员中。进程状态的切换过程和原因大致如下图(图片来自《Linux Kernel Development》):
2、进程标识符(PID)
[cpp]
2,进程标识符(PID)
在CONFIG_BASE_SMALL配置为0的情况下,PID的取值范围是0到32767,即系统中的进程数最大为32768个。
#define PID_MAX_DEFAULT (CONFIG_BASE_SMALL ? 0x1000 : 0x8000)
在Linux系统中,一个线程组中的所有线程使用和该线程组的领头线程(该组中的第一个轻量级进程)相同的PID,并被存放在tgid成员中。只有线程组的领头线程的pid成员才会被设置为与tgid相同的值。注意,getpid()系统调用返回的是当前进程的tgid值而不是pid值。
3、进程内核栈
进程通过alloc_thread_info函数分配它的内核栈,通过free_thread_info函数释放所分配的内核栈。
static inline struct thread_info *alloc_thread_info( struct task_struct *tsk) { #ifdef CONFIG_DEBUG_STACK_USAGE gfp_t mask = GFP_KERNEL | __GFP_ZERO; #else gfp_t mask = GFP_KERNEL; #endif return ( struct thread_info *)__get_free_pages(mask, THREAD_SIZE_ORDER); } static inline void free_thread_info( struct thread_info *ti) { free_pages((unsigned long )ti, THREAD_SIZE_ORDER); }
其中,THREAD_SIZE_ORDER宏在linux-2.6.38.8/arch/arm/include/asm/thread_info.h文件中被定义为1,也就是说alloc_thread_info函数通过调用__get_free_pages函数分配2个页的内存(它的首地址是8192字节对齐的)。
union thread_union { struct thread_info thread_info; unsigned long stack[THREAD_SIZE/ sizeof ( long )]; };
当进程从用户态切换到内核态时,进程的内核栈总是空的,所以ARM的sp寄存器指向这个栈的顶端。因此,内核能够轻易地通过sp寄存器获得当前正在CPU上运行的进程。
static inline struct task_struct *get_current( void ) { return current_thread_info()->task; } #define current (get_current()) static inline struct thread_info *current_thread_info( void ) { register unsigned long sp asm ( "sp" ); return ( struct thread_info *)(sp & ~(THREAD_SIZE - 1)); }
进程内核栈与进程描述符的关系如下图:
4、标记
flags成员的可能取值如下:
#define PF_KSOFTIRQD 0x00000001 /* I am ksoftirqd */ #define PF_STARTING 0x00000002 /* being created */ #define PF_EXITING 0x00000004 /* getting shut down */ #define PF_EXITPIDONE 0x00000008 /* pi exit done on shut down */ #define PF_VCPU 0x00000010 /* I'm a virtual CPU */ #define PF_WQ_WORKER 0x00000020 /* I'm a workqueue worker */ #define PF_FORKNOEXEC 0x00000040 /* forked but didn't exec */ #define PF_MCE_PROCESS 0x00000080 /* process policy on mce errors */ #define PF_SUPERPRIV 0x00000100 /* used super-user privileges */ #define PF_DUMPCORE 0x00000200 /* dumped core */ #define PF_SIGNALED 0x00000400 /* killed by a signal */ #define PF_MEMALLOC 0x00000800 /* Allocating memory */ #define PF_USED_MATH 0x00002000 /* if unset the fpu must be initialized before use */ #define PF_FREEZING 0x00004000 /* freeze in progress. do not account to load */ #define PF_NOFREEZE 0x00008000 /* this thread should not be frozen */ #define PF_FROZEN 0x00010000 /* frozen for system suspend */ #define PF_FSTRANS 0x00020000 /* inside a filesystem transaction */ #define PF_KSWAPD 0x00040000 /* I am kswapd */ #define PF_OOM_ORIGIN 0x00080000 /* Allocating much memory to others */ #define PF_LESS_THROTTLE 0x00100000 /* Throttle me less: I clean memory */ #define PF_KTHREAD 0x00200000 /* I am a kernel thread */ #define PF_RANDOMIZE 0x00400000 /* randomize virtual address space */ #define PF_SWAPWRITE 0x00800000 /* Allowed to write to swap */ #define PF_SPREAD_PAGE 0x01000000 /* Spread page cache over cpuset */ #define PF_SPREAD_SLAB 0x02000000 /* Spread some slab caches over cpuset */ #define PF_THREAD_BOUND 0x04000000 /* Thread bound to specific cpu */ #define PF_MCE_EARLY 0x08000000 /* Early kill for mce process policy */ #define PF_MEMPOLICY 0x10000000 /* Non-default NUMA mempolicy */ #define PF_MUTEX_TESTER 0x20000000 /* Thread belongs to the rt mutex tester */ #define PF_FREEZER_SKIP 0x40000000 /* Freezer should not count it as freezable */ #define PF_FREEZER_NOSIG 0x80000000 /* Freezer won't send signals to it */
5、表示进程亲属关系的成员
struct task_struct *real_parent; struct task_struct *parent; struct list_head children; struct list_head sibling; struct task_struct *group_leader;
在Linux系统中,所有进程之间都有着直接或间接地联系,每个进程都有其父进程,也可能有零个或多个子进程。拥有同一父进程的所有进程具有兄弟关系。
real_parent指向其父进程,如果创建它的父进程不再存在,则指向PID为1的init进程。
parent指向其父进程,当它终止时,必须向它的父进程发送信号。它的值通常与real_parent相同。
children表示链表的头部,链表中的所有元素都是它的子进程。
sibling用于把当前进程插入到兄弟链表中。
group_leader指向其所在进程组的领头进程。
6、ptrace系统调用
unsigned int ptrace; struct list_head ptraced; struct list_head ptrace_entry; unsigned long ptrace_message; siginfo_t *last_siginfo; ifdef CONFIG_HAVE_HW_BREAKPOINT atomic_t ptrace_bp_refcnt; endif
成员ptrace被设置为0时表示不需要被跟踪,它的可能取值如下:
#define PT_PTRACED 0x00000001 #define PT_DTRACE 0x00000002 /* delayed trace (used on m68k, i386) */ #define PT_TRACESYSGOOD 0x00000004 #define PT_PTRACE_CAP 0x00000008 /* ptracer can follow suid-exec */ #define PT_TRACE_FORK 0x00000010 #define PT_TRACE_VFORK 0x00000020 #define PT_TRACE_CLONE 0x00000040 #define PT_TRACE_EXEC 0x00000080 #define PT_TRACE_VFORK_DONE 0x00000100 #define PT_TRACE_EXIT 0x00000200
7、Performance Event
#ifdef CONFIG_PERF_EVENTS struct perf_event_context *perf_event_ctxp[perf_nr_task_contexts]; struct mutex perf_event_mutex; struct list_head perf_event_list; #endif
Performance Event是一款随 Linux 内核代码一同发布和维护的性能诊断工具。这些成员用于帮助PerformanceEvent分析进程的性能问题。
关于Performance Event工具的介绍可参考文章http://www.ibm.com/developerworks/cn/linux/l-cn-perf1/index.html?ca=drs-#major1和http://www.ibm.com/developerworks/cn/linux/l-cn-perf2/index.html?ca=drs-#major1。
8、进程调度
int prio, static_prio, normal_prio; unsigned int rt_priority; const struct sched_class *sched_class; struct sched_entity se; struct sched_rt_entity rt; unsigned int policy; cpumask_t cpus_allowed;
实时优先级范围是0到MAX_RT_PRIO-1(即99),而普通进程的静态优先级范围是从MAX_RT_PRIO到MAX_PRIO-1(即100到139)。值越大静态优先级越低。
#define MAX_USER_RT_PRIO 100 #define MAX_RT_PRIO MAX_USER_RT_PRIO #define MAX_PRIO (MAX_RT_PRIO + 40) #define DEFAULT_PRIO (MAX_RT_PRIO + 20)
static_prio用于保存静态优先级,可以通过nice系统调用来进行修改。
rt_priority用于保存实时优先级。
normal_prio的值取决于静态优先级和调度策略。
prio用于保存动态优先级。
policy表示进程的调度策略,目前主要有以下五种:
#define SCHED_NORMAL 0 #define SCHED_FIFO 1 #define SCHED_RR 2 #define SCHED_BATCH 3 #define SCHED_IDLE 5
SCHED_NORMAL用于普通进程,通过CFS调度器实现。SCHED_BATCH用于非交互的处理器消耗型进程。SCHED_IDLE是在系统负载很低时使用。
SCHED_FIFO(先入先出调度算法)和SCHED_RR(轮流调度算法)都是实时调度策略。
sched_class结构体表示调度类,目前内核中有实现以下四种:
static const struct sched_class fair_sched_class; static const struct sched_class rt_sched_class; static const struct sched_class idle_sched_class; static const struct sched_class stop_sched_class;
se和rt都是调用实体,一个用于普通进程,一个用于实时进程,每个进程都有其中之一的实体。
cpus_allowed用于控制进程可以在哪里处理器上运行。
9、进程地址空间
struct mm_struct *mm, *active_mm; #ifdef CONFIG_COMPAT_BRK unsigned brk_randomized:1; #endif #if defined(SPLIT_RSS_COUNTING) struct task_rss_stat rss_stat; #endif
mm指向进程所拥有的内存描述符,而active_mm指向进程运行时所使用的内存描述符。对于普通进程而言,这两个指针变量的值相同。但是,内核线程不拥有任何内存描述符,所以它们的mm成员总是为NULL。当内核线程得以运行时,它的active_mm成员被初始化为前一个运行进程的active_mm值。
brk_randomized的用法在http://lkml.indiana.edu/hypermail/linux/kernel/1104.1/00196.html上有介绍,用来确定对随机堆内存的探测。
rss_stat用来记录缓冲信息。
10、判断标志
int exit_code, exit_signal; int pdeath_signal; unsigned int personality; unsigned did_exec:1; unsigned in_execve:1; unsigned in_iowait:1; unsigned sched_reset_on_fork:1;
exit_code用于设置进程的终止代号,这个值要么是_exit()或exit_group()系统调用参数(正常终止),要么是由内核提供的一个错误代号(异常终止)。
exit_signal被置为-1时表示是某个线程组中的一员。只有当线程组的最后一个成员终止时,才会产生一个信号,以通知线程组的领头进程的父进程。
pdeath_signal用于判断父进程终止时发送信号。
personality用于处理不同的ABI,它的可能取值如下:
enum { PER_LINUX = 0x0000, PER_LINUX_32BIT = 0x0000 | ADDR_LIMIT_32BIT, PER_LINUX_FDPIC = 0x0000 | FDPIC_FUNCPTRS, PER_SVR4 = 0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO, PER_SVR3 = 0x0002 | STICKY_TIMEOUTS | SHORT_INODE, PER_SCOSVR3 = 0x0003 | STICKY_TIMEOUTS | WHOLE_SECONDS | SHORT_INODE, PER_OSR5 = 0x0003 | STICKY_TIMEOUTS | WHOLE_SECONDS, PER_WYSEV386 = 0x0004 | STICKY_TIMEOUTS | SHORT_INODE, PER_ISCR4 = 0x0005 | STICKY_TIMEOUTS, PER_BSD = 0x0006, PER_SUNOS = 0x0006 | STICKY_TIMEOUTS, PER_XENIX = 0x0007 | STICKY_TIMEOUTS | SHORT_INODE, PER_LINUX32 = 0x0008, PER_LINUX32_3GB = 0x0008 | ADDR_LIMIT_3GB, PER_IRIX32 = 0x0009 | STICKY_TIMEOUTS, PER_IRIXN32 = 0x000a | STICKY_TIMEOUTS, PER_IRIX64 = 0x000b | STICKY_TIMEOUTS, PER_RISCOS = 0x000c, PER_SOLARIS = 0x000d | STICKY_TIMEOUTS, PER_UW7 = 0x000e | STICKY_TIMEOUTS | MMAP_PAGE_ZERO, PER_OSF4 = 0x000f, PER_HPUX = 0x0010, PER_MASK = 0x00ff, };
did_exec用于记录进程代码是否被execve()函数所执行。
in_execve用于通知LSM是否被do_execve()函数所调用。详见补丁说明:http://lkml.indiana.edu/hypermail/linux/kernel/0901.1/00014.html。
in_iowait用于判断是否进行iowait计数。
sched_reset_on_fork用于判断是否恢复默认的优先级或调度策略。
11、时间
cputime_t utime, stime, utimescaled, stimescaled; cputime_t gtime; #ifndef CONFIG_VIRT_CPU_ACCOUNTING cputime_t prev_utime, prev_stime; #endif unsigned long nvcsw, nivcsw; struct timespec start_time; struct timespec real_start_time; struct task_cputime cputime_expires; struct list_head cpu_timers[3]; #ifdef CONFIG_DETECT_HUNG_TASK unsigned long last_switch_count; #endif
utime/stime用于记录进程在用户态/内核态下所经过的节拍数(定时器)。prev_utime/prev_stime是先前的运行时间,请参考补丁说明http://lkml.indiana.edu/hypermail/linux/kernel/1003.3/02431.html。
utimescaled/stimescaled也是用于记录进程在用户态/内核态的运行时间,但它们以处理器的频率为刻度。
gtime是以节拍计数的虚拟机运行时间(guest time)。
nvcsw/nivcsw是自愿(voluntary)/非自愿(involuntary)上下文切换计数。last_switch_count是nvcsw和nivcsw的总和。
start_time和real_start_time都是进程创建时间,real_start_time还包含了进程睡眠时间,常用于/proc/pid/stat,补丁说明请参考http://lkml.indiana.edu/hypermail/linux/kernel/0705.0/2094.html。
cputime_expires用来统计进程或进程组被跟踪的处理器时间,其中的三个成员对应着cpu_timers[3]的三个链表。
12、信号处理
struct signal_struct *signal; struct sighand_struct *sighand; sigset_t blocked, real_blocked; sigset_t saved_sigmask; struct sigpending pending; unsigned long sas_ss_sp; size_t sas_ss_size; int (*notifier)( void *priv); void *notifier_data; sigset_t *notifier_mask;
signal指向进程的信号描述符。
sighand指向进程的信号处理程序描述符。
blocked表示被阻塞信号的掩码,real_blocked表示临时掩码。
pending存放私有挂起信号的数据结构。
sas_ss_sp是信号处理程序备用堆栈的地址,sas_ss_size表示堆栈的大小。
设备驱动程序常用notifier指向的函数来阻塞进程的某些信号(notifier_mask是这些信号的位掩码),notifier_data指的是notifier所指向的函数可能使用的数据。
13、其他
(1)、用于保护资源分配或释放的自旋锁
(2)、进程描述符使用计数,被置为2时,表示进程描述符正在被使用而且其相应的进程处于活动状态。
(3)、用于表示获取大内核锁的次数,如果进程未获得过锁,则置为-1。
(4)、在SMP上帮助实现无加锁的进程切换(unlocked context switches)
#ifdef CONFIG_SMP #ifdef __ARCH_WANT_UNLOCKED_CTXSW int oncpu; #endif #endif
(5)、preempt_notifier结构体链表
#ifdef CONFIG_PREEMPT_NOTIFIERS struct hlist_head preempt_notifiers; #endif
(6)、FPU使用计数
unsigned char fpu_counter;
(7)、blktrace是一个针对Linux内核中块设备I/O层的跟踪工具。
#ifdef CONFIG_BLK_DEV_IO_TRACE unsigned int btrace_seq; #endif
(8)、RCU同步原语
#ifdef CONFIG_PREEMPT_RCU int rcu_read_lock_nesting; char rcu_read_unlock_special; struct list_head rcu_node_entry; #endif /* #ifdef CONFIG_PREEMPT_RCU */ #ifdef CONFIG_TREE_PREEMPT_RCU struct rcu_node *rcu_blocked_node; #endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */ #ifdef CONFIG_RCU_BOOST struct rt_mutex *rcu_boost_mutex; #endif /* #ifdef CONFIG_RCU_BOOST */
(9)、用于调度器统计进程的运行信息
#if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT) struct sched_info sched_info; #endif
(10)、用于构建进程链表
(11)、to limit pushing to one attempt
#ifdef CONFIG_SMP struct plist_node pushable_tasks; #endif
补丁说明请参考:http://lkml.indiana.edu/hypermail/linux/kernel/0808.3/0503.html
(12)、防止内核堆栈溢出
#ifdef CONFIG_CC_STACKPROTECTOR unsigned long stack_canary; #endif
在GCC编译内核时,需要加上-fstack-protector选项。
(13)、PID散列表和链表
struct pid_link pids[PIDTYPE_MAX]; struct list_head thread_group;
(14)、do_fork函数
struct completion *vfork_done; int __user *set_child_tid; int __user *clear_child_tid;
在执行do_fork()时,如果给定特别标志,则vfork_done会指向一个特殊地址。
如果copy_process函数的clone_flags参数的值被置为CLONE_CHILD_SETTID或CLONE_CHILD_CLEARTID,则会把child_tidptr参数的值分别复制到set_child_tid和clear_child_tid成员。这些标志说明必须改变子进程用户态地址空间的child_tidptr所指向的变量的值。
(15)、缺页统计
unsigned long min_flt, maj_flt;
(16)、进程权能
const struct cred __rcu *real_cred; const struct cred __rcu *cred; struct cred *replacement_session_keyring;
(17)、相应的程序名
char comm[TASK_COMM_LEN];
(18)、文件
int link_count, total_link_count; struct fs_struct *fs; struct files_struct *files;
fs用来表示进程与文件系统的联系,包括当前目录和根目录。
files表示进程当前打开的文件。
(19)、进程通信(SYSVIPC)
#ifdef CONFIG_SYSVIPC struct sysv_sem sysvsem; #endif
(20)、处理器特有数据
struct thread_struct thread ;
(21)、命名空间
(22)、进程审计
struct audit_context *audit_context; #ifdef CONFIG_AUDITSYSCALL uid_t loginuid; unsigned int sessionid; #endif
(23)、secure computing
(24)、用于copy_process函数使用CLONE_PARENT 标记时
u32 parent_exec_id; u32 self_exec_id;
(25)、中断
#ifdef CONFIG_GENERIC_HARDIRQS struct irqaction *irqaction; #endif #ifdef CONFIG_TRACE_IRQFLAGS unsigned int irq_events; unsigned long hardirq_enable_ip; unsigned long hardirq_disable_ip; unsigned int hardirq_enable_event; unsigned int hardirq_disable_event; int hardirqs_enabled; int hardirq_context; unsigned long softirq_disable_ip; unsigned long softirq_enable_ip; unsigned int softirq_disable_event; unsigned int softirq_enable_event; int softirqs_enabled; int softirq_context; #endif
(26)、task_rq_lock函数所使用的锁
(27)、基于PI协议的等待互斥锁,其中PI指的是priority inheritance(优先级继承)
#ifdef CONFIG_RT_MUTEXES struct plist_head pi_waiters; struct rt_mutex_waiter *pi_blocked_on; #endif
(28)、死锁检测
#ifdef CONFIG_DEBUG_MUTEXES struct mutex_waiter *blocked_on; #endif
(29)、lockdep,参见内核说明文档linux-2.6.38.8/Documentation/lockdep-design.txt
#ifdef CONFIG_LOCKDEP # define MAX_LOCK_DEPTH 48UL u64 curr_chain_key; int lockdep_depth; unsigned int lockdep_recursion; struct held_lock held_locks[MAX_LOCK_DEPTH]; gfp_t lockdep_reclaim_gfp; #endif
(30)、JFS文件系统
(31)、块设备链表
struct bio_list *bio_list;
(32)、内存回收
struct reclaim_state *reclaim_state;
(33)、存放块设备I/O数据流量信息
struct backing_dev_info *backing_dev_info;
(34)、I/O调度器所使用的信息
struct io_context *io_context;
(35)、记录进程的I/O计数
struct task_io_accounting ioac; if defined(CONFIG_TASK_XACCT) u64 acct_rss_mem1; u64 acct_vm_mem1; cputime_t acct_timexpd; endif
在Ubuntu 11.04上,执行cat获得进程1的I/O计数如下:
[cpp]
$ sudo cat /proc/1/io
[cpp] view plain copy
rchar: 164258906
wchar: 455212837
syscr: 388847
syscw: 92563
read_bytes: 439251968
write_bytes: 14143488
cancelled_write_bytes: 2134016
输出的数据项刚好是task_io_accounting结构体的所有成员。
(36)、CPUSET功能
[cpp]
#ifdef CONFIG_CPUSETS
nodemask_t mems_allowed; /* Protected by alloc_lock */
int mems_allowed_change_disable;
int cpuset_mem_spread_rotor;
int cpuset_slab_spread_rotor;
#endif
(37)、Control Groups
[cpp]
#ifdef CONFIG_CGROUPS
/* Control Group info protected by css_set_lock */
struct css_set __rcu *cgroups;
/* cg_list protected by css_set_lock and tsk->alloc_lock */
struct list_head cg_list;
#endif
#ifdef CONFIG_CGROUP_MEM_RES_CTLR /* memcg uses this to do batch job */
struct memcg_batch_info {
int do_batch; /* incremented when batch uncharge started */
struct mem_cgroup *memcg; /* target memcg of uncharge */
unsigned long bytes; /* uncharged usage */
unsigned long memsw_bytes; /* uncharged mem+swap usage */
} memcg_batch;
#endif
(38)、futex同步机制
[cpp]
#ifdef CONFIG_FUTEX
struct robust_list_head __user *robust_list;
#ifdef CONFIG_COMPAT
struct compat_robust_list_head __user *compat_robust_list;
#endif
struct list_head pi_state_list;
struct futex_pi_state *pi_state_cache;
#endif
(39)、非一致内存访问(NUMA Non-Uniform Memory Access)
[cpp]
#ifdef CONFIG_NUMA
struct mempolicy *mempolicy; /* Protected by alloc_lock */
short il_next;
#endif
(40)、文件系统互斥资源
[cpp]
atomic_t fs_excl; /* holding fs exclusive resources */
(41)、RCU链表
[cpp]
struct rcu_head rcu;
(42)、管道
[cpp]
struct pipe_inode_info *splice_pipe;
(43)、延迟计数
[cpp]
#ifdef CONFIG_TASK_DELAY_ACCT
struct task_delay_info *delays;
#endif
(44)、fault injection,参考内核说明文件linux-2.6.38.8/Documentation/fault-injection/fault-injection.txt
[cpp]
#ifdef CONFIG_FAULT_INJECTION
int make_it_fail;
#endif
(45)、FLoating proportions
[cpp]
struct prop_local_single dirties;
(46)、Infrastructure for displayinglatency
[cpp]
#ifdef CONFIG_LATENCYTOP
int latency_record_count;
struct latency_record latency_record[LT_SAVECOUNT];
#endif
(47)、time slack values,常用于poll和select函数
[cpp]
unsigned long timer_slack_ns;
unsigned long default_timer_slack_ns;
(48)、socket控制消息(control message)
[cpp]
struct list_head *scm_work_list;
(49)、ftrace跟踪器
[cpp]
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
/* Index of current stored address in ret_stack */
int curr_ret_stack;
/* Stack of return addresses for return function tracing */
struct ftrace_ret_stack *ret_stack;
/* time stamp for last schedule */
unsigned long long ftrace_timestamp;
/*
* Number of functions that haven't been traced
* because of depth overrun.
*/
atomic_t trace_overrun;
/* Pause for the tracing */
atomic_t tracing_graph_pause;
#endif
#ifdef CONFIG_TRACING
/* state flags for use by tracers */
unsigned long trace;
/* bitmask of trace recursion */
unsigned long trace_recursion;
#endif /* CONFIG_TRACING */