Ubuntu下搭建TQ2440的程序下载dnw环境

首先要安装libusb-dev这个库,

sudo apt-get install libusb-dev

/* dnw2 linux main file. This depends on libusb.
*
* Author:         Fox <hulifox008@163.com>
* License:        GPL
*
*/



#include <stdio.h>
#include <usb.h>
#include <errno.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>

#define                 QQ2440_SECBULK_IDVENDOR                0x5345
#define                QQ2440_SECBULK_IDPRODUCT        0x1234


struct usb_dev_handle * open_port()
{
        struct usb_bus *busses, *bus;

        usb_init();
        usb_find_busses();
        usb_find_devices();

        busses = usb_get_busses();
        for(bus=busses;bus;bus=bus->next)
        {
                 struct usb_device *dev;
                for(dev=bus->devices;dev;dev=dev->next)
                {
                printf("idVendor:0x%x\t,ipProduct:0x%x\n",dev->descriptor.idVendor,dev->descriptor.idProduct);
                        if( QQ2440_SECBULK_IDVENDOR==dev->descriptor.idVendor
                        &&  QQ2440_SECBULK_IDPRODUCT==dev->descriptor.idProduct)
                        {
                                printf("Target usb device found!\n");
                                struct usb_dev_handle *hdev = usb_open(dev);
                                if(!hdev) 
                                {
                                        perror("Cannot open device");        
                                }
                                else
                                {
                                        if(0!=usb_claim_interface(hdev, 0))
                                        {
                                                perror("Cannot claim interface");
                                                usb_close(hdev);
                                                hdev = NULL;
                                        }
                                }
                                return hdev;
                        }
                }
        }
        
        printf("Target usb device not found!\n");

        return NULL;
}

void usage()
{
        printf("Usage: dnw2 <file>\n\n");
}

unsigned char* prepare_write_buf(char *filename, unsigned int *len)
{
        unsigned char *write_buf = NULL;
        struct stat fs;

        int fd = open(filename, O_RDONLY);
        if(-1==fd)
        {
                perror("Cannot open file");
                return NULL;
        }
        if(-1==fstat(fd, &fs))
        {
                perror("Cannot get file size");
                goto error;
        }
        write_buf = (unsigned char*)malloc(fs.st_size+10);
        if(NULL==write_buf)
        {
                perror("malloc failed");
                goto error;
        }

        if(fs.st_size != read(fd, write_buf+8, fs.st_size))
        {
                perror("Reading file failed");
                goto error;
        }

        printf("Filename : %s\n", filename);
        printf("Filesize : %d bytes\n", fs.st_size);

        *((u_int32_t*)write_buf) = 0x30000000;                //download address
        *((u_int32_t*)write_buf+1) = fs.st_size + 10;        //download size;

        *len = fs.st_size + 10;
        return write_buf;

error:
        if(fd!=-1) close(fd);
        if(NULL!=write_buf) free(write_buf);
        fs.st_size = 0;
        return NULL;
        
}

int main(int argc, char *argv[])
{
        if(2!=argc)
        {
                usage();
                return 1;
        }

        struct usb_dev_handle *hdev = open_port();
        if(!hdev)
        {
                return 1;
        }

        unsigned int len = 0;
        unsigned char* write_buf = prepare_write_buf(argv[1], &len);
        if(NULL==write_buf) return 1;

        unsigned int remain = len;
        unsigned int towrite;
        printf("Writing data ...\n");
        while(remain)
        {
                towrite = remain>512 ? 512 : remain; 
                if(towrite != usb_bulk_write(hdev, 0x03, write_buf+(len-remain), towrite, 3000))
                {
                        perror("usb_bulk_write failed");
                        break;
                }
                remain-=towrite;
                printf("\r%d%\t %d bytes     ", (len-remain)*100/len, len-remain);
                fflush(stdout);
        }
        if(0==remain) printf("Done!\n");
        return 0;
}

把它保存为文件如：dnw2.c
接着编译: gcc dnw2.c -o dnw2 -lusb
编译完得到的dnw2就是usb下载的PC端了。