（转）WinCE（s3c2410)的LCD驱动程序编写指南(续2）

  5. 在（ 4 ）中修改了 DISPLAY 显示缓冲区的开始地址 , 因此要在“ s2410.h ”中做相应的修改：
…/WINCE420/PLATFORM/SMDK2410/INC/s2410.h
#define DMA_BUFFER_BASE                    0xAC000000
#define DMA_PHYSICAL_BASE                0x30000000

//#define FRAMEBUF_BASE                      (DMA_BUFFER_BASE + 0x00100000)
//#define FRAMEBUF_DMA_BASE           (DMA_PHYSICAL_BASE + 0x00100000)
#define FRAMEBUF_BASE                        (DMA_BUFFER_BASE + 0x00060000)
#define FRAMEBUF_DMA_BASE              (DMA_PHYSICAL_BASE + 0x00060000)



6. 在（ 4 ）中修改了 DISPLAY 显示缓冲区的大小 , 因此要在“ s 3c 2410disp.cpp ”中做相应的修改：
       …/WINCE420/PLATFORM/SMDK2410/DRIVERS/DISPLAY/S 3C 2410LCD/s 3c 2410disp.cpp
红色部分为修改后的内容：
void S 3C 2410DISP::InitializeHardware (void)
{
       *********
       m_VirtualFrameBuffer = (DWORD)VirtualAlloc(0, (0x 1A 0000), MEM_RESERVE, PAGE_NOACCESS);
       if (m_VirtualFrameBuffer == NULL)
       {
           RETAILMSG(0,(TEXT("m_VirtualFrameBuffer is not allocated/n/r")));
              return;
       }
       else if (!VirtualCopy((PVOID)m_VirtualFrameBuffer, (PVOID)gdwLCDVirtualFrameBase, (0x 1A 0000), PAGE_READWRITE | PAGE_NOCACHE))
       {
           RETAILMSG(0, (TEXT("m_VirtualFrameBuffer is not mapped/n/r")));
           VirtualFree((PVOID)m_VirtualFrameBuffer, 0, MEM_RELEASE);
           return;
       }
       *********
}

在（ 4 ）中修改了 DISPLAY 显示缓冲区的开始地址 , 还要对注册表文件“ platform.reg ”做相应的修改：
       …/ WINCE420/PLATFORM/SMDK2410/FILES/platform.reg
[HKEY_LOCAL_MACHINE/Drivers/Display/S 3C 2410/CONFIG]
"DisplayDll"="s 3c 2410disp.dll"
;"LCDVirtualFrameBase"=dword:ac100000
;"LCDPhysicalFrameBase"=dword:30100000
"LCDVirtualFrameBase"=dword:ac060000
"LCDPhysicalFrameBase"=dword:30060000

7.