kali配置网络（2）

实验环境：kali虚拟机，4G运行
实验目的：使用dhcp分配kali的IP地址
实验步骤：
1，配置虚拟机网络适配器

2，配置网卡

┌──(root💀kali)-[~]
└─# vim /etc/network/interfaces                 网卡配置路径
auto  lo
iface lo inet loopback

3，进行验证

┌──(root💀kali)-[~]
└─# systemctl restart   networking        重启网卡                                  
┌──(root💀kali)-[~]
└─# ifconfig eth0                                  查看网卡信息
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.22.137  netmask 255.255.255.0  broadcast 192.168.22.255
        inet6 fe80::20c:29ff:fed2:2719  prefixlen 64  scopeid 0x20<link>
        ether 00:0c:29:d2:27:19  txqueuelen 1000  (Ethernet)
        RX packets 8129  bytes 5984487 (5.7 MiB)
        RX errors 4  dropped 7  overruns 0  frame 0
        TX packets 8150  bytes 846147 (826.3 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 18  base 0x2000  

┌──(root💀kali)-[~]
└─# ping www.baidu.com             ping百度看网络状态是否正常
PING www.a.shifen.com (39.156.66.18) 56(84) bytes of data.
64 bytes from 39.156.66.18: icmp_seq=1 ttl=128 time=21.0 ms
^C64 bytes from 39.156.66.18: icmp_seq=2 ttl=128 time=25.4 ms

--- www.a.shifen.com ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 10028ms
rtt min/avg/max/mdev = 20.962/23.187/25.413/2.225 ms

【至此，kali使用dhcp分配IP地址实验完成】