2020-11-29

#include <LiquidCrystal.h>
#include <Keypad.h>

long int set1;
long int set2;
long int set3;
long int set4;
long int j;
int t1, t2, t3, t4, t5, t6;
int r1, r2, r3;
char key;
String r[8];
String hours;
String minutes;
String seconds;

const byte ROWS = 4; // Four rows
const byte COLS = 4; // Three columns

char keys[ROWS][COLS] = {
  {'1','2','3','A'},
  {'4','5','6','B'},
  {'7','8','9','C'},
  {'*','0','#','D'}
};

byte rowPins[ROWS] = { 6, 7, 8, 9 };// Connect keypad ROW0, ROW1, ROW2 and ROW3 to these Arduino pins
byte colPins[COLS] = { 10, 11, 12, 13 };// Connect keypad COL0, COL1 and COL2 to t

LiquidCrystal lcd(A0, A1, 5, 4, 3, 2); // Creates an LC object. Parameters: (rs, enable, d4, d5, d6, d7)

Keypad kpd = Keypad( makeKeymap(keys), rowPins, colPins, ROWS, COLS );

void setFeedingTime()
{
  bool feed = true;
  int i=0;

  lcd.clear();
  lcd.setCursor(0,0);
  lcd.print("Set feeding Time");
  lcd.clear();
  lcd.print("HH:MM:SS");
  lcd.setCursor(0,1);

  while(1){
    key = kpd.getKey();
    char j;

  if(key!=NO_KEY){
    lcd.setCursor(j,1);
    lcd.print(key);   
    r[i] = key-48;
    i++;
    j++;

    if (j==2 || j == 5)
    {
      lcd.print(":"); j++;
    }
    delay(500);
  }

  if (key == 'D')
  {key=0; break; }
  }
  lcd.clear();
}


void setup()
{
  lcd.begin(16,2);
  Serial.begin(9600);
  pinMode(A0, OUTPUT);
  pinMode(A1, OUTPUT);
  pinMode(A3, INPUT);
  pinMode(A4, OUTPUT);
}


void loop()
{
  lcd.setCursor(0,0);
  lcd.print("Arduino Timer");
  if(digitalRead((A3) == 1))
  {
    lcd.clear();
    setFeedingTime();
    for(int i = 0;i < 6;i++)
    {
      Serial.print(r[i]);
      Serial.println();
    }
    hours = String(r[0]) +String(r[1]);
    minutes = String(r[2] + r[3]);
    seconds = String(r[4] + r[5]);

    set1 = (hours.toInt()*3600);
    set2 = (minutes.toInt()*60);
    set3 = seconds.toInt();
    set4 = (hours.toInt() * 3600) + (minutes.toInt() * 60) + seconds.toInt();
    Serial.print("set4");
    Serial.print(set4);
    Serial.println();

    lcd.setCursor(0,0);
    lcd.print("Countdoem begins");
    delay(1000);
    lcd.clear();

    for(long int j = set4;j >= 0;j--)
    {
      Serial.println(j);

      lcd.setCursor(0,0);
      lcd.print("HH:MM:SS");

      long int HH = j / 3600;
      lcd .setCursor(0,1);
      Serial.println(HH);
      if(HH < 10)
      {
        lcd.print("0");
      }
      lcd.print(HH);
      lcd.print(":");

      long int MM = (j - (HH*3600))/60;
      lcd.setCursor(3,1);
      Serial.println(MM);
      if(MM < 10)
      {
        lcd.print('0');
      }
      lcd.print(MM);
      lcd.print(":");

      long int SS = j - ((HH*3600) + (MM*60));
      lcd.setCursor(6,1);
      Serial.println(SS);
      if(SS < 10)
      {
        lcd.print("0");
      }
      lcd.print(SS);
      delay(1000);

      if(digitalRead(A3) == 1)
      {
        break;
      }

      if(j == 0)
      {
        lcd.clear();
        lcd.setCursor(0,0);
        lcd.print("TImer Stop");
        lcd.setCursor(2,1);
        lcd.print("Ring-Ring");

        for(int k = 0;k <= 100; k++)
        {
          digitalWrite(A4,HIGH);
          delay(300);
          digitalWrite(A4.LOW);
          delay(300);

          if(digitalRead(A3) == 1)
          {
            break;
          }
         }
      }
    }
  }
}