OSPF配置（不同区域OSPF配置如何做，看这里）

1.拓扑图：
2.图中实现pc4和pc5进行通信，而且L1和L3处于不同的OSPF区域如何配置呢？
配置如下：
[r1]dis cu

version 7.1.075, Alpha 7571

sysname r1

ospf 1
area 0.0.0.0
network 192.168.1.0 0.0.0.255
network 192.168.2.0 0.0.0.255

system-working-mode standard
xbar load-single
password-recovery enable
lpu-type f-series

vlan 1
interface GigabitEthernet0/0
port link-mode route
combo enable copper
ip address 192.168.1.1 255.255.255.0

interface GigabitEthernet0/1
port link-mode route
combo enable copper
ip address 192.168.2.1 255.255.255.0
[r2]dis cu

version 7.1.075, Alpha 7571

sysname r2

ospf 1
area 0.0.0.0
network 192.168.2.0 0.0.0.255
area 0.0.0.1
network 192.168.3.0 0.0.0.255
vlan 1

interface GigabitEthernet0/0
port link-mode route
combo enable copper
ip address 192.168.2.2 255.255.255.0

interface GigabitEthernet0/1
port link-mode route
combo enable copper
ip address 192.168.3.1 255.255.255.0
[r3]dis cu

version 7.1.075, Alpha 7571

sysname r3

ospf 1
area 0.0.0.1
network 192.168.3.0 0.0.0.255
network 192.168.4.0 0.0.0.255

system-working-mode standard
xbar load-single
password-recovery enable
lpu-type f-series

vlan 1

interface GigabitEthernet0/0
port link-mode route
combo enable copper
ip address 192.168.3.2 255.255.255.0

interface GigabitEthernet0/1
port link-mode route
combo enable copper
ip address 192.168.4.1 255.255.255.0

经过上面的配置，pc4和pc5 之间实现了通信
如图：