hcia第七天作业

m0_71372800

于 2023-06-08 17:45:20 发布

阅读量151

点赞数

文章标签：网络

本文链接：https://blog.csdn.net/m0_71372800/article/details/131112917

版权

r1配置:

<Huawei>sys
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sysn
[Huawei]sysname
^
Error:Incomplete command found at '^' position.
[Huawei]sysname r1
[r1]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

<r1>sys
Enter system view, return user view with Ctrl+Z.
[r1]int l
[r1]int LoopBack 0
[r1-LoopBack0]ip ad
[r1-LoopBack0]ip address 192.168.1.0 28
Error: The specified IP address is invalid.
[r1-LoopBack0]ip address 192.168.1.1 28
[r1-LoopBack0]q
[r1]int LoopBack 1
[r1-LoopBack1]ip ad
[r1-LoopBack1]ip address 192.168.1.17 28
[r1-LoopBack1]q
[r1]int g0/0/0
[r1-GigabitEthernet0/0/0]ip ad
[r1-GigabitEthernet0/0/0]ip address 192.168.1.33 28
Jun 8 2023 17:20:16-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r1-GigabitEthernet0/0/0]q
[r1]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

<r1>sys
Enter system view, return user view with Ctrl+Z.
[r1]rip
[r1-rip-1]ver
[r1-rip-1]verify-source
[r1-rip-1]version 2
[r1-rip-1]un
[r1-rip-1]undo s
[r1-rip-1]undo silent-interface
[r1-rip-1]undo summary
[r1-rip-1]net
[r1-rip-1]network 192.168.1.0

r2配置:

<r2>sys
Enter system view, return user view with Ctrl+Z.
[r2]int lo
[r2]int LoopBack 0
[r2-LoopBack0]int l
[r2-LoopBack0]ip ad
[r2-LoopBack0]ip address 192.168.1.49 28
[r2-LoopBack0]q
[r2]int LoopBack 1
[r2-LoopBack1]ip address 192.168.1.65 28
[r2-LoopBack1]q
[r2]int g0/0/0
[r2-GigabitEthernet0/0/0]ip ad
[r2-GigabitEthernet0/0/0]ip address 192.168.1.34 28
Jun 8 2023 17:23:39-08:00 r2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r2-GigabitEthernet0/0/0]q
[r2]int g0/0/1
[r2-GigabitEthernet0/0/1]ip ad
[r2-GigabitEthernet0/0/1]ip address 192.168.1.81 28
[r2-GigabitEthernet0/0/1]
Jun 8 2023 17:24:16-08:00 r2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r2-GigabitEthernet0/0/1]q
[r2]v
[r2]vlan
[r2]voice-vlan
[r2]vrrp
[r2]vlan
[r2]rip
[r2]rip
[r2-rip-1]ver
[r2-rip-1]version 2
[r2-rip-1]undo su
[r2-rip-1]undo summary
[r2-rip-1]netw
[r2-rip-1]network 192.168.1.0
[r2-rip-1]ne
[r2-rip-1]network 192.168.1.16
Error: The network address is invalid, and the specified address must be major-n
et address without any subnets.
[r2-rip-1]undo network 192.168.1.0
[r2-rip-1]net
[r2-rip-1]network 192.168.1.48
Error: The network address is invalid, and the specified address must be major-n
et address without any subnets.
[r2-rip-1]network 192.168.1.0

r3配置:

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysn
[Huawei]sysname r3
[r3]
Jun 8 2023 17:14:40-08:00 r3 %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEthern
et0/0/0 has turned into DOWN state.
[r3]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

<r3>
<r3>sys
Enter system view, return user view with Ctrl+Z.
[r3]int lo
[r3]int LoopBack 0
[r3-LoopBack0]ip ad
[r3-LoopBack0]ip address 3.3.3.1 28
[r3-LoopBack0]q
[r3]int g0/0/0
[r3-GigabitEthernet0/0/0]ip ad
[r3-GigabitEthernet0/0/0]ip address 192.168.1.82 28
Jun 8 2023 17:25:24-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r3-GigabitEthernet0/0/0]q
[r3]rip
[r3-rip-1]ver
[r3-rip-1]verify-source
[r3-rip-1]version 2
[r3-rip-1]und
[r3-rip-1]undo s
[r3-rip-1]undo silent-interface
[r3-rip-1]undo summary
[r3-rip-1]nety
[r3-rip-1]net
[r3-rip-1]network 192.168.1.0
[r3-rip-1]q
[r3]disp
[r3]display this
[V200R003C00]
#
sysname r3
#
snmp-agent local-engineid 800007DB03000000000000
snmp-agent
#
clock timezone China-Standard-Time minus 08:00:00
#
portal local-server load portalpage.zip
#
drop illegal-mac alarm
#
set cpu-usage threshold 80 restore 75
#
return
[r3]dis
[r3]display ip r
[r3]display ip rd-filter
[r3]display ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 15 Routes : 15

Destination/Mask Proto Pre Cost Flags NextHop Interface

3.3.3.0/28 Direct 0 0 D 3.3.3.1 LoopBack0
3.3.3.1/32 Direct 0 0 D 127.0.0.1 LoopBack0
3.3.3.15/32 Direct 0 0 D 127.0.0.1 LoopBack0
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
127.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0
192.168.1.0/28 RIP 100 2 D 192.168.1.81 GigabitEthernet
0/0/0
192.168.1.16/28 RIP 100 2 D 192.168.1.81 GigabitEthernet
0/0/0
192.168.1.32/28 RIP 100 1 D 192.168.1.81 GigabitEthernet
0/0/0
192.168.1.48/28 RIP 100 1 D 192.168.1.81 GigabitEthernet
0/0/0
192.168.1.64/28 RIP 100 1 D 192.168.1.81 GigabitEthernet
0/0/0
192.168.1.80/28 Direct 0 0 D 192.168.1.82 GigabitEthernet
0/0/0
192.168.1.82/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/0
192.168.1.95/32 Direct 0 0 D 127.0.0.1 GigabitEthernet
0/0/0
255.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0

[r3]rip
[r3]rip
[r3-rip-1]s
[r3-rip-1]summary
[r3-rip-1]silent-interface l
[r3-rip-1]silent-interface loo
[r3-rip-1]silent-interface loo
[r3-rip-1]silent-interface loo
[r3-rip-1]silent-interface loo
[r3-rip-1]silent-interface loo
[r3-rip-1]silent-interface loo
[r3-rip-1]silent-interface loo
[r3-rip-1]silent-interface loo
[r3-rip-1]silent-interface loook
[r3-rip-1]silent-interface look
[r3-rip-1]silent-interface look
[r3-rip-1]silent-interface look
[r3-rip-1]q