AVI File Format
1 Introduction
1.1 Why another AVI le format documentation?
Even though the AVI le format has been around for more than 10 years, there is no docu-
mentation available which does not only describe the format itself, but which also informs
about issues that come from awed demuxers and awed decoders, and how to circumvent
them.
The goal of this document is not only to explain the AVI format, as it is dened on the
paper, but rather how to use it, when working with awed muxers, awed demuxers, and
awed decompressors.
1.2 Basic data structures
There are 2 types of atoms in AVI les:
1.2.1 Chunks
typedef struct {
DWORD dwFourCC
DWORD dwSize
BYTE data[dwSize] // contains headers or video/audio data
} CHUNK;
1.2.2 Lists
typedef struct {
DWORD dwList
DWORD dwSize
DWORD dwFourCC
BYTE data[dwSize-4] // contains Lists and Chunks
} LIST;
A chunk containing video, audio or subtitle data uses a dwFourCC containing 2 hexadecimal
digits specifying the stream number and 2 letters specifying the data type (dc = video, wb
= audio, tx = text). The values dwFourCC and dwSize have the same meaning in both of
the structures:
dwFourCC describes the type of the chunk (for example 'hdrl' for 'header list'), and dwSize
contains the size of the chunk or list, including the rst byte after the dwSize value. In the
case of Lists, this includes the 4 bytes taken by dwFourCC!
The value of dwList can be 'RIFF' ('RIFF-List') or 'LIST' ('List').
1.3 AVI le types
Basicly, there are 3 types of AVI les:
• AVI 1.0 The original, old AVI le.
• Open-DML An extension to the AVI le format. Version 1.02 has been specied by
28/02/1996. The most important improvements are:
almost unlimited lesize (much more than what NTFS allows, for example)
overhead reduced by 33%
• Hybride-Files: Open-DML les that contain an additional Legacy Index for compat-
ibility reasons. This is not an "ocial" word for those les, but it is describing that
le type pretty well. Hybride les containing only one RIFF List can be treated as
either le type.
This document describes the subset of Open-DML 1.02 le format features, as well as some
additions ('hacks'), which work in common players if the proper (freely available) lters are
installed. Features that work in Open-DML, but not in AVI 1.0, will be indicated to be
Open-DML only.
2 Layout of an AVI le
A RIFF-List where dwFourCC = 'AVI ' shall be called a 'RIFF-AVI-List', a RIFF-List
where dwFourCC = 'AVIX' shall be called a 'RIFF-AVIX-List'.
Every AVI le has the following layout:
RIFF AVI // mandatory
{ RIFF AVIX } // only for Open-DML files
Unlike what a uint32 suggests, the limit for the size of those lists is not 4 GB, but
• for AVI 1.0: size(RIFF-AVI) < 2 GB
• for Open-DML:
size(RIFF-AVI) < 1 GB (!!) (assumed to be 2 GB by some muxing applications,
like VirtualDub!)
size(RIFF-AVIX) < 2 GB
As Windows XP insists on reading the entire rst RIFF AVI list if no Legacy Index (see
page 12) is found, and as that Legacy Index causes overhead, it is recommended to create
RIFF-AVI-Lists as small as possible.
2.1 Headers
The header section of an AVI le looks like this:
The following sections describe the meaning of these lists and chunks.
2.1.1 MainAVIHeader (avih)
This structure is dened as follows:
typedef struct
{
DWORD dwMicroSecPerFrame; // frame display rate (or 0)
DWORD dwMaxBytesPerSec; // max. transfer rate
DWORD dwPaddingGranularity; // pad to multiples of this
// size;
DWORD dwFlags; // the ever-present flags
DWORD dwTotalFrames; // # frames in file
DWORD dwInitialFrames;
DWORD dwStreams;
DWORD dwSuggestedBufferSize;
DWORD dwWidth;
DWORD dwHeight;
DWORD dwReserved[4];
} MainAVIHeader;
Unfortunately, those values do NOT have the meaning they seem to have when looking at
their names.
• dwMicroSecPerFrame
Contains the duration of one video frame in microseconds. This value can be ignored
(see stream header), but shall be written correctly by any AVI writer.
Important: Some broken programs, like AVIFrate, write the framerate value in the
stream header, but not dwMicroSecPerFrame. Thus, dwMicroSecPerFrame should not
be considered reliable!
• dwMaxBytesPerSec
Highest occuring data rate within the le. That value is of no importance either. Its
reliability should not be overrated.
• dwPaddingGranularity
File is padded to a multiple of this
• dwFlags
See below
• dwTotalFrames
Contains the number of video frames in the RIFF-AVI list (it should NOT contain
the total number of frames in the entire le if there are RIFF-AVIX-Lists. Some tools
claiming to handle AVI les even assume this, but it denitely violates the Open-DML
le format specication. Such applications are broken.) As some AVI le muxers write
bad values here, this value should not be considered reliable.
• dwInitialFrames
Ignore that
• dwStreams
Number of streams in the le
• dwSuggestedBufferSize
Size of buer required to hold chunks of the le. The reliability of this value should
not be overrated.
• dwWidth
Width of video stream
• dwHeight
Height of video stream
Available Flags for MainAVIHeader::dwFlags
• AVIF_HASINDEX
The le has an index
• AVIF_MUSTUSEINDEX
The order in which the video and audio chunks must be replayed is determined by the
index and may dier from the order in which those chunks occur in the le.
• AVIF_ISINTERLEAVED
The streams are properly interleaved into each other
• AVIF_WASCAPTUREFILE
The le was captured. The interleave might be weird.
• AVIF_COPYRIGHTED
Ignore it
• AVIF_TRUSTCKTYPE (Open-DML only!)
This ag indicates that the keyframe ags in the index are reliable. If this ag is not
set in an Open-DML le, the keyframe ags could be defective without technically
rendering the le invalid.
2.1.2 The Stream header list - general
There is one strl - List for each stream. If the number of strl - Lists inside the hdrl - List
is dierent from MainAVIHeader::dwStreams, a fatal error should be reported.
2.1.3 The stream header list element: strh
typedef struct {
FOURCC fccType;
FOURCC fccHandler;
DWORD dwFlags;
WORD wPriority;
WORD wLanguage;
DWORD dwInitialFrames;
DWORD dwScale;
DWORD dwRate; /* dwRate / dwScale == samples/second */
DWORD dwStart;
DWORD dwLength; /* In units above... */
DWORD dwSuggestedBufferSize;
DWORD dwQuality;
DWORD dwSampleSize;
RECT rcFrame;
} AVIStreamHeader;
Again, the meaning is not always obvious.
• fccType
Can be
'vids' - video
'auds' - audio
'txts' - subtitle
• fccHandler
FourCC of codec to be used.
• dwFlags
The following ags are dened:
AVISF_DISABLED - Stream should not be activated by default
AVISF_VIDEO_PALCHANGES - Stream is a video stream using palettes where the
palette is changing during playback.
• dwInitialFrames
Number of the rst block of the stream that is present in the le.
• dwRate / dwScale =
samples / second (audio) or
frames / second (video).
dwScale and dwRate should be mutually prime. Tests have shown that for example
10,000,000/400,000 instead of 25/1 results in les that don't work on some hardware
MPEG4 players.
• dwStart
Start time of stream. In the case of VBR audio, this value indicates the number of
silent frames to be played before the stream starts.
• dwLength
size of stream in units as dened in dwRate and dwScale
• dwSuggestedBufferSize
Size of buer necessary to store blocks of that stream. Can be 0 (in that case the
application has to guess), but should not be 0, as Microsoft's AVI splitter does not
handle this case properly in some cases (e.g. MP3-CBR in Open-DML les)
• dwQuality
should indicate the quality of the stream. Not important
• dwSampleSize
number of bytes of one stream atom (that should not be split any further).
2.1.4 The stream header list element: strf
The structure of the strf chunk depends on the media type.
Video streams use the BITMAPINFOHEADER structure, whereas audio streams use the WAVEFORMATEX
structure.
2.1.5 The stream header list element: indx
This chunk contains the upper level index for the stream. See page 13.
2.1.6 The stream header list element: strn
This element contains a name for the stream. That stream name should only use plain
ASCII, especially not UTF-8.
3 AVI Indexes
3.1 old style index
The index as described is the index you will nd in AVI 1.0 les. It is placed after the movi
List in the RIFF AVI List. The data section of the idx1 chunk has the following layout:
AVIINDEXENTRY index_entry[n]
typedef struct {
DWORD ckid;
DWORD dwFlags;
DWORD dwChunkOffset;
DWORD dwChunkLength;
} AVIINDEXENTRY;
Those values have the following meaning:
• ckid
Species a four-character code corresponding to the chunk ID of a data chunk in the
le.
• dwFlags
The following ags are dened:
AVIIF_KEYFRAME: The chunk the entry refers to is a keyframe.
AVIIF_LIST: The entry points to a list, not to a chunk.
AVIIF_FIRSTPART: Indicates this chunk needs the frames following it to be used;
it cannot stand alone.
AVIIF_LASTPART: Indicates this chunk needs the frames preceding it to be used;
it cannot stand alone.
AVIIF_NOTIME: The duration which is applied to the corresponding chunk is 0.
If neither AVIIF_FIRSTPART nor AVIIF_LASTPART is set, the chunk can be used alone,
in other words, it is at least one packet of the corresponding stream. This is important
for storing VBR audio streams in AVI les (see chapter 5.4)
• dwChunkOset
Contains the position of the header of the corresponding Chunk.
Warning: This can be either the absolute position in the le, or the position relatively
to the rst byte of the 'movi' identicator. An AVI File parser must be able to handle
both versions.
• dwChunkLength
Contains the size of the corresponding chunk in bytes.
3.2 Open-DML Index
The general structure of an Open-DML-Index-Chunk is the following:
typedef struct _aviindex_chunk {
FOURCC fcc;
DWORD cb;
WORD wLongsPerEntry;
BYTE bIndexSubType;
BYTE bIndexType;
DWORD nEntriesInUse;
DWORD dwChunkId;
DWORD dwReserved[3];
struct _aviindex_entry {
DWORD adw[wLongsPerEntry];
} aIndex [ ];
} AVIINDEXCHUNK;
Every subtype of Open-DML index structures is compatible to this one. The elements have
the following meaning:
• fcc, cb: Chunk header, same as dwFourCC and dwSize in the CHUNK structure
• wLongsPerEntry: every aIndex[i] has a size of 4*wLongsPerEntry bytes. (the struc-
ture of each aIndex[i] depends on the special type of index)
• bIndexType, bIndexSubType: denes the type of the index
• nEntriesInUse: aIndex[0]..aIndex[nEntriesInUse-1] are valid
• dwChunkId: ID of the stream the index points into, for example '00dc'.
Consequently, one such index chunk can only point to data of one and the same stream.
3.2.1 Upper Level Index ('Super Index')
The upper level index ('super index') points to other index chunks and has the following
structure:
typedef struct _avisuperindex_chunk {
FOURCC fcc;
DWORD cb;
WORD wLongsPerEntry;
BYTE bIndexSubType;
BYTE bIndexType;
DWORD nEntriesInUse;
DWORD dwChunkId;
DWORD dwReserved[3];
struct _avisuperindex_entry {
__int64 qwOffset;
DWORD dwSize;
DWORD dwDuration;
} aIndex[ ];
} AVISUPERINDEX;
The following values are now dened more specically:
• bIndexType = AVI_INDEX_OF_INDEXES
• bIndexSubType = [ AVI_INDEX_2FIELD | 0 ]
• wLongsPerEntry = 4
As you can see, the aIndex array now consists of 4 DWORDs per entry. The values have the
following meaning:
• qwOffset: Position of the index chunk this entry points to in the le
• dwSize: The size of the standard or eld index chunk the entry is pointing to
• dwDuration: The duration, measured in stream ticks as indicated in the AVI stream
header. In case of video or VBR audio, that usually refers to the number of frames.
Important:
VirtualDub 1.4.10 and earlier versions wrote b0rked values for this member in the
audio stream. Thus, an AVI parser should be able to handle les without using this
value!
3.2.2 The Standard Index
This index type contains pointers to video, audio or subtitle chunks. It also is a special form
of the general Open-DML Index and looks like this:
typedef struct _avistdindex_chunk {
FOURCC fcc;
DWORD cb;
WORD wLongsPerEntry;
BYTE bIndexSubType;
BYTE bIndexType;
DWORD nEntriesInUse;
DWORD dwChunkId;
__int64 qwBaseOffset;
DWORD dwReserved3;
struct _avistdindex_entry {
DWORD dwOffset;
DWORD dwSize;
} aIndex[ ];
} AVISTDINDEX;
• wLongsPerEnrty:
As you can see easily, each aIndex[i] takes 8 bytes,
so wLongsPerEntry = 2
• bIndexSubType: = 0
• bIndexType:= AVI_INDEX_OF_CHUNKS
• qwBaseOffset:
This value is added to each dwOffset value of the AVISTDINDEX.
• dwOffset, dwSize: These elements dene the position (qwBaseOffset + dwOffset)
of the data section of the corresponding CHUNK (NOT the chunk header!) and its
length. There are nEntriesInUse such pairs, each one describing one video/audio
frame. Note that Bit 31 of dwSize indicates the frametype: If this bit is set, this frame
is not a keyframe.
Low-overhead mode
The Open-DML specication does not explicitly require that each "data section" the index
contains an entry to be preceded by a chunk header. Thus, several frames can be put into
one chunk, while having one index entry per frame. This way, only few frames have a chunk
header, reducing the overhead by 50% compared to normal Open-DML les. This means, of
course, that the AVIF_MUSTUSEINDEX ag in the main AVI header must be set, to force any
parser to use the index. Files created this way will be called "low overhead AVI les".
This is not an AVI le type on its own. Any parser handling that ag, as well as the Open-
DML index correctly, should be compatible to such les. Microsoft's AVI splitter, as well as
VirtualDub(Mod) can handle such les without problems, without having been updated to
do so.
3.3 Using the Open-DML Index
The preceding section described what the Open-DML Index looks like. This section will deal
with using it.
Each stream contains an 'indx' chunk in its stream header list ('strl'). This chunk is a
Super Index chunk.
As each Standard Index contains one 64 bit oset and then a list of 32 bit osets relatively to
the 64 bit oset, one Standard Index chunk can only point to data within one 4 GB segment.
Thus you need one Standard Index per 4 GB le size per stream.
Unfortunately, it seems that Microsoft did not read the specication properly: If a le
contains more than 3 audio streams, then the Microsoft AVI Splitter will not recognize les
using such large Standard Index chunks. It is required to use smaller pieces. Tests have
shown that pieces with 15000 entries each are small enough to be processed correctly by
Microsoft's AVI splitter.
4 The movi - Lists
The Movi - Lists contain Video, Audio, Subtitle and (secondary) index data. Those can be
grouped into rec - Lists. Example:
LIST movi
LIST rec
01wb
01wb
02wb
03wb
03wb
03wb
00dc
00dc
LIST rec
01wb
02wb
LIST rec
...
...
ix01
ix02
ix03
....
....
The following chunk header IDs are dened:
• ..wb: audio chunk
• ..dc: video chunk
• ..tx: subtitle chunk
• ix..: standard index block
Grouping chunks into rec - Lists prevents excessive seeking when using the Microsoft AVI
splitter for replay, but does not allow playback on some standalone replay devices.
The maximum size of a chunk of a stream should be smaller than the corresponding dwSuggestedBufferSiz
value. Otherwise, some players, especially the Microsoft AVI splitter, could malfunction.
5 Audio types requiring special attention
5.1 MP3
wFormatTag = 0x0055
An MP3 audio stream consists of inseparable frames. MP3 decoders should be able to handle
partial frames, but it is nevertheless recommended to store entire MP3 frames in the AVI
chunks.
The strf chunk is an MPEGLAYER3WAVEFORMAT structure, which is an extention to the
WAVEFORMATEX structure:
typedef struct mpeglayer3waveformat_tag {
WAVEFORMATEX wfx;
WORD wID;
DWORD fdwFlags;
WORD nBlockSize;
WORD nFramesPerBlock;
WORD nCodecDelay;
} MPEGLAYER3WAVEFORMAT;
Important:
This is only valid for MP3 ('MPEG Layer 3'), not for MP1 or MP2 ('MPEG Layer 1 / 2').
If the MP3 stream has a variable bitrate, then you need to convince DirectShow to seek
properly. See section 5.4 (page 20) for more details on VBR audio streams in AVI les.
Unfortunately, whoever came up with the idea didn't think enough about it: It is possible
to create MP3 audio frames larger than 1152 bytes if the sample rate is 32 khz or less. After
reading and understanding section 5.4, you'll see why such audio frames render an MP3
stream unplayable if nBlockSize is set to 1152, which is usually done for MP3. Using a
larger value would resolve this issue. However, some programs read an MP3 stream as VBR
if and only if this value is exactly 1152. In other words, low sample rates in combination
with high bitrates are a problem for MP3 VBR streams in AVI les.
5.2 AC3
wFormatTag = 0x2000
Muxing AC3 into AVI is far more problematic than most other audio formats. The reason
is that a lot of decoders (software as well as hardware) are severely b0rked.
An AC3 stream consists, like MP3, of individual, inseparable frames. It is required that
any audio chunk of an AVI le contains a few (complete!) AC3 frames. Otherwise, some
AC3 decoders will miscalculate the duration of a chunk. As the audio stream is considered
the master stream for playback in DirectShow, this miscalculation will lead to jerky video
playback.
Theoretically, chunks containing one AC3 frame are valid, but there are hardware decoders
which won't work with such streams. If you place more than 6 AC3 frames into one chunk,
you might get increased playback speed. Thus, the recommendation is to place be-
tween 2 and 5 AC3 frames into one AVI chunk.
5.3 DTS
wFormatTag = 0x2001
It seems to work out to place between 2 and 20 DTS frames in one AVI chunk. I have not
yet tried higher values on my own. If you have a hardware DTS decoder, please do some
testing and report back what values work and which ones don't. Just like with AC3, do not
split up any DTS frames.
5.4 VBR audio - general
Just like the video stream of virtually every AVI le does have a variable bitrate and a
constant frame duration (e.g. 40ms), an audio stream of an AVI le can also have variable
bitrate, if the frame duration is constant. This means, placing Vorbis audio in an AVI le
will NOT result in anything playable using the method described below.
As the goal is to make DirectShow seek in the stream like in a video stream, it is required
to use some of the stream header values in the same way they are used with video streams.
That means:
• dwRate contains the sample rate
• dwScale contains the number of samples in one audio frame
• WAVEFORMATEX::nBlockAlign must have a value at least as big as the largest frame of
that stream, measured in bytes.
• dwSampleSize = 0
• Each chunk contains entire stream packets and is therefore marked as such. Neither
AVIIF_LASTPART nor AVIIF_FIRSTPART is set for any chunk. This way, DirectShow
assumes each chunk to contain a packet of the duration indicated in the stream headers.
This way, you can ensure that the M$ AVI Splitter will believe that the duration of every
chunk is
[roundup(chunk size / nBlockAlign)] * dwScale / dwRate
You can, of course, create units larger than one frame to decrease overhead (independantly
from "low overhead muxing" as described on page 16).
However, if a stream is VBR, it is required that every chunk (in the case of "normal" les)
or every piece of audio data the index points to (in the case of "low overhead AVI les")
contains the same number of samples. The dwScale value needs to be set accordingly.
5.5 MPx VBR
• MPEG 1 Layer 3: 1152 samples per frame
• MPEG 2 Layer 3: 576 samples per frame
• MPEG 1/2 Layer 2: Strongly discouraged from being used, because the default MPEG
Layer 2 decoder present on Windows systems does not recognise MPEG Layer 2 streams
when using VBR headers.
5.6 AAC
For AAC, one RAW AAC frame usually spans over 1024 samples. However, depending on
the source container (e.g. ADTS), it is theoretically possible that you are not able to extract
packets of equal duration from your source le. In this case, it is highly recommended not
to mux the AAC stream into AVI, but report a fatal error instead.
AAC and HE-AAC require private data in the corresponding WAVEFORMATEX structures. See
the source code of AVI-Mux GUI (FillASI.cpp) for details.
5.7 VFR Audio - Storing Vorbis in AVI
Generally, the AVI le format does not support variable framerate streams. However, such
streams can nevertheless be stored in AVI les when it is possible to create AVI chunks of
constant duration, so that the stream can be treated as a normal VBR stream. There are
basicly 2 possible ways to do that:
• Building larger "macro frames" of constant duration and placing one such macro frame
into one chunk. This requires a decoder that is able to decode a sequence of independant
frames at once, a decoder which does not require that only one single frame at once
be transmitted. The currently available Vorbis decoders do no meet this requirement.
• The duration of one chunk is set to a very small value, several empty frames are added
after one that is supposed to be long. This, however, causes a lot of overhead.
FFMPEG is using the second idea. However, mpeg is increasing the overhead even more, as
it stores frame headers for each of the padding chunks, wasting 8 bytes each time, instead of
only storing one of them physically, adding an index entry everytime such a chunk is required,
and setting AVIF_MUSTUSEINDEX. For such streams, the following ID is used: wFormatTag
= 0x566F. The Vorbis initialization packets (the rst 3 packets of an OGG/Vorbis le) are
stored as private data in the strf chunk. Each vorbis initialization packet is stored the
following way:
big_endian_int16 size
char data[size];
6 Subtitles in AVI les
This section explains how to store subtitles in AVI les, so that VSFilter can be used to load
and select subtitles.
One subtitle stream is stored in one single chunk. That chunk contains header data, followed
by an entire SRT or SSA le. If that le is using UTF-8 encoding, the BOM should be
included as well. The header is dened as follows:
char[4]; // 'GAB2'
BYTE 0x00;
WORD 0x02; // unicode
DWORD dwSize_name; // length of stream name in bytes
char name[dwSize_name]; // zero-terminated subtitle stream
name encoded in UTF-16
WORD 0x04;
DWORD dwSize; // size of SRT/SSA text file
char data[dwSize]; // entire SRT/SSA file
Stream header chunk
typedef struct {
FOURCC fccType; // "txts"
FOURCC fccHandler; // 00 00 00 00
DWORD dwFlags;
WORD wPriority;
WORD wLanguage;
DWORD dwInitialFrames;
DWORD dwScale;
DWORD dwRate; // dwRate / dwScale == duration in seconds
DWORD dwStart;
DWORD dwLength; // In units above..., should be 1
DWORD dwSuggestedBufferSize;
DWORD dwQuality;
DWORD dwSampleSize; // = 0 -> treated as VBR
RECT rcFrame; // 0, 0, 0, 0
} AVIStreamHeader;
Stream format chunk
This chunk has a size of 0.
Stream name chunk
The strn chunk is ignored by VSlter, so there is no need to read or write it.
7 Garbage in AVI les
One way to set a delay in AVI les is using the AVIStreamHeader::dwStart value (see page
10). However, not every player reads this value, so that such les would not properly play
on them. Some applications, like VirtualDub and derivates (NanDub, VirtualDubMod ) add
some data to the beginning of streams to be delayed.
Unfortunately, those applications don't care about the data format, but rather pad with
zeros. Those zeros are refered to as 'garbage' in this section. The scope is to explain how to
read such les, which requires that the duration of the garbage section be determined.
It is of course required that the beginning of the valid data be found, for example in the case
of MP3, AC3 or DTS by looking for frame headers. Formats which don't use frame headers
that can be detected easily, like AAC, will result in broken streams if zeros are added to the
beginning.
7.1 Constant Bitrate
If the bitrate of a stream is constant, the duration of the garbage section is simply garbage_length
* data_rate.
7.2 Variable Bitrate
In this case, the duration must be retrieved chunk-wise:
As described on page 20, the duration of one chunk is
roundup(size_of_chunk / strf::nBlockAlign) * duration_per_frame.
Consequently, if the beginning of the valid data is the m-th byte in chunk n, the duration
of the garbage section is
sum[i=0..n-1](duration(chunk[i])) + roundup(m/nBlockAlign)
8 Overhead of AVI les
This section describes how to predict the overhead of an AVI le before muxing. Note: In
the case of low overhead AVI les, the wording in this section is not applicable. Basicly, one
video/audio frame causes about 8-9 bytes of overhead in low overhead AVI les.
8.1 General
The overhead of AVI les depends on the number of CHUNKs in the le. Other structures has
only very little inuence on the total overhead. Each CHUNK causes the following amount of
overhead:
• 8 Bytes chunk header (all avi types)
• 16 Bytes for entry in Legacy Index (see page 12) (AVI 1.0 and the RIFF-AVI-List of
Hybride les)
• 8 Bytes for entry in Standard Index (see page 15) (Open-DML)
That means, each CHUNK causes an amount of overhead of 16, 24 or 32 bytes.
8.2 Getting number of CHUNKS
8.2.1 Video
The easier part is the video stream: Each video frame takes one CHUNK.
8.2.2 Audio
The number of chunks for an audio stream depends on its format and packing. For specic
formats, where very special packing is required or considered normal (see page 19), the
overhead can be calculated easily from the settings. Otherwise, more precise information on
the muxing settings is needed.
8.2.3 Examples
Video: 3 hours, 25 fps ( = 3,600,000 / 40ms = 90,000 frames per hour)
Audio: 2x MP3-VBR (with 1 frame per CHUNK and 24 ms per frame)
Audio: 2x AC3 (with 4 frames per CHUNK and 32ms per frame)
-> Video: 270,000 CHUNKs
-> Audio: 2*150,000 + 2*3*28,125 = 468,750 CHUNKs
-> Sum = 738,750 CHUNKs
AVI File Format (AVI文件格式)
最新推荐文章于 2024-06-22 09:06:40 发布