使用nc检测udp端口是否可以正常通讯

netcat，很少用，总把这东西忘了，做个记录，这玩意也有windows版的 http://joncraton.org/blog/46。

[root@domU-12-33-39-01-6C-F1:~] nc -h

usage: nc [-46DdhklnrStUuvzC] [-i interval] [-p source_port]

          [-s source_ip_address] [-T ToS] [-w timeout] [-X proxy_version]

          [-x proxy_address[:port]] [hostname] [port[s]]

        Command Summary:

                -4              Use IPv4

                -6              Use IPv6

                -D              Enable the debug socket option

                -d              Detach from stdin

                -h              This help text

                -i secs         Delay interval for lines sent, ports scanned

                -k              Keep inbound sockets open for multiple connects

                -l              Listen mode, for inbound connects

                -n              Suppress name/port resolutions

                -p port         Specify local port for remote connects

                -r              Randomize remote ports

                -s addr         Local source address

                -T ToS          Set IP Type of Service

                -C              Send CRLF as line-ending

                -t              Answer TELNET negotiation

                -U              Use UNIX domain socket

                -u              UDP mode

                -v              Verbose

                -w secs         Timeout for connects and final net reads

                -X proto        Proxy protocol: "4", "5" (SOCKS) or "connect"

                -x addr[:port]  Specify proxy address and port

                -z              Zero-I/O mode [used for scanning]

        Port numbers can be individual or ranges: lo-hi [inclusive]

用来测试upd端口是否正常

a端：nc -ul 161

b端: nc -u a.a.a.a 161

在b端随便输入字符，看是否能够传到a端。 

通过测试，使用nc传文件要比scp快不少，当然，安全性低了。

a端：nc -l 161 >/opt/test

b端：nc a.a.a.a 161 <test

不要使用udp协议啊，UDP 不保证传输的可靠性