https://access.redhat.com/solutions/3660221
SOLUTION 已验证 - 已更新 2018年十二月17日19:02 -
环境
- Red Hat Enterprise Linux
问题
- Bonding failover is not happening when cable gets disconnected
决议
- Make sure that Link Monitoring Mode is configured for the bond interface. Either miimon or arp_interval parameters need to be configured in /etc/sysconfig/network-scripts/ifcfg-bondX file.
More details can be found here.
根源
- Configuring a bond without a link monitoring mode is not a valid use of the bonding driver.
诊断步骤
Link monitoring mode is not configured for bond interface
转帖者注:
Link Monitoring Mode 应该就是 /etc/sysconfig/network-scripts/ifcfg-bondX文件中的miimon参数,见下:
BONDING_OPTS="miimon=100 mode=0"
或者不用miimon,用ARP monitoring parameters,见我的转帖文章:https://blog.csdn.net/msdnchina/article/details/90315733
中的“Link Monitoring Mode”章节