oracle 参数游标

一、参数游标
   参数游标是带有参数的游标,在定义参数游标之后,当使用不同参数值多次打开游标时,可以产生不同的结果集,语法如下:
cursor cursor_name(parameter_name datatype) is select_statement;
定义参数游标时,游标参数只能指定数据类型,而不能指定长度。
示例如下:

declare
cursor temp_cursor(no number) is select name from cip_temps where id=no;
v_name cip_temps.name%type; 
begin
open temp_cursor(1);
loop
fetch temp_cursor into v_name;
exit when temp_cursor%notfound;
dbms_output.put_line(v_name);
end loop;
close temp_cursor;
end;


二、使用游标更新或删除数据
通过使用显示游标,不仅可以一行一行的处理select语句结果,而且也可以更新或删除当前游标的数据,注意,如果要通过游标更新或删除数据,在定义游标时一定要带有for update子句,语法如下:
cursor cursor_name(parameter_name datatype) is select_statement for updae [of column_reference][nowait];如上所示:for update子句用于在游标结果集数据上加行共享锁,以防止其他用户在相应行上执行DML操作,当select语句要引用到多张表是,使用of子句可以确定哪些表要加锁,如果没有of子句,则会在select语句所引用的全部表上加锁,nowait用于指定不等待锁,为了更新或删除当前游标行数据,必须在update 或delete语句中引用where current of 子句,语法如下:
update table_name set column=.. where current of cursor_name;
delete from table_name  where current of cursor_name;

1、使用游标更新数据

declare
cursor temp_cursor is select name,address,id from cip_temps for update;
v_name cip_temps.name%type;
v_address cip_temps.ADDRESS%type;
v_id cip_temps.id%type;
begin
open temp_cursor;
loop
fetch temp_cursor into v_name,v_address,v_id;
exit when temp_cursor%NOTFOUND;
if(v_id>4) then
update cip_temps set name='name'||to_char(v_id),address='address'||to_char(v_id) where current of temp_cursor;
end if;
end loop;
close temp_cursor;
end;


2、使用游标删除数据 

declare
cursor temp_cursor is select name,address,id from cip_temps for update;
v_name cip_temps.name%type;
v_address cip_temps.ADDRESS%type;
v_id cip_temps.id%type;
begin
open temp_cursor;
loop
fetch temp_cursor into v_name,v_address,v_id;
exit when temp_cursor%NOTFOUND;
if(v_id>2) then
delete from cip_temps where current of temp_cursor;
end if;
end loop;
close temp_cursor;
end;


3、使用of子句在特定表加行共享锁。
如果使用子查询涉及到多张表,那么默认情况下会在所有表上加行共享锁,为了只在特定表上加行共享锁,需要在for update子句后带有of子句,of后面跟字段名,如果跟表名或游标名称,则会报错:标示符无效。示例如下:

declare
cursor gData is select name,address,cip_temps.id from cip_temps,cip_t 
where cip_temps.id=cip_t.id for update  of address;
rs gData%rowtype;
begin
  open gData;
  loop
     fetch gData into rs;
     exit when gData%notfound;
         if rs.id=1 then
            delete from cip_temps where current of gData; 
         else
            update cip_temps set name='塞北的雪' where current of gData;
         end if;
  
  end loop;
  close gData;
end;


4、使用nowait子句
使用for update语句对被作用于行加锁,如果其他会话已经在被作用于行上加锁,那么默认情况下当前会话要一直等待对方释放锁,通过在for update子句中指定 nowait语句,可以避免等待锁,当指定了nowait子句之后,如果其他会话已经在被作用行加锁,那么当前会话会显示错误提示信息,并退出PL/SQL,示例如下:

declare
cursor gData is select name,address,cip_temps.id from cip_temps,cip_t 
where cip_temps.id=cip_t.id for update  nowait;
rs gData%rowtype;
begin
  open gData;
  loop
     fetch gData into rs;
     exit when gData%notfound;
         if rs.id=1 then
            delete from cip_temps where current of gData; 
         else
            update cip_temps set name='塞北的雪' where current of gData;
         end if;
  
  end loop;
  close gData;
end;


三、游标for循环
   使用游标for循环是循环游标最简单的方法,oracle会隐含打开游标、循环提取数据、关闭游标,语法如下:
     for record_name  in cursor_name  loop
           ..........
     end loop;
如上所示:cursor_name是已经定义的游标名称,record_name是oracle隐含定义的记录变量。
1、使用游标for循环
   当使用游标开发程序时,建议使用for循环,从而简化代码程序,示例如下:

declare
cursor temp_cursor is  select name,age,address,id from cip_temps;
begin
for emp_record in temp_cursor loop
dbms_output.put_line(temp_cursor%rowcount||'第一行数据:'||emp_record.name||':'|| emp_record.age||':'||  emp_record.address||':'|| emp_record.id);
end loop;
end;


2、在游标for循环时直接使用子查询

declare   
begin   
for emp_record in (select * from cip_temps) loop   
dbms_output.put_line('第一行数据:'||emp_record.name||':'|| emp_record.age||':'||  emp_record.address||':'|| emp_record.id);   
end loop;   
end;  
 
  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值