imx6ull 启动buildroot 镜像出现各种io错误，使用卡片型号为KLMGGETF

Running sysctl: OK
Populating /dev using udev: [    4.506500] mmc0: Tuning failed, falling back to fixed sampling clock
[    4.609947] udevd[101]: starting version 3.2.14
[    4.814988] I/O error, dev mmcblk0, sector 64415 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 2
[    4.885023] I/O error, dev mmcblk0, sector 64416 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 2
[    4.955685] I/O error, dev mmcblk0, sector 64417 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 2
[    5.067444] mmc0: Tuning failed, falling back to fixed sampling clock
[    5.092370] mmc0: Tuning failed, falling back to fixed sampling clock
[    5.236638] I/O error, dev mmcblk0, sector 106108 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[    5.375065] I/O error, dev mmcblk0, sector 106157 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[    5.386342] I/O error, dev mmcblk0, sector 106158 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[    5.476800] udevd[102]: starting eudev-3.2.14
[    7.026443] I/O error, dev mmcblk0, sector 70747 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 2
[    7.208325] mmc0: cache flush error -84
[    7.638085] EXT4-fs error (device mmcblk0p2): __ext4_get_inode_loc_noinmem:4513: inode #518: block 414: comm udevd: unable to read itable block
[    7.676898] caam-snvs 20cc000.caam-snvs: ipid matched - 0x3e
[    7.682689] caam-snvs 20cc000.caam-snvs: violation handlers armed - non-secure state
[    7.702039] udevd[108]: ctx=0x5e3660 path=/lib/modules/6.6.23/kernel/lib/crc8.ko error=Input/output error
[    7.830484] btnxpuart: Unknown symbol crc8 (err -2)
[    7.836086] imx-sdma 20ec000.dma-controller: firmware found.
[    7.858919] btnxpuart: Unknown symbol crc8_populate_msb (err -2)
[    7.866280] imx-sdma 20ec000.dma-controller: loaded firmware 3.6
[    8.454940] blk_print_req_error: 5 callbacks suppressed
[    8.455007] I/O error, dev mmcblk0, sector 15269208 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[    8.585150] I/O error, dev mmcblk0, sector 15269152 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[    8.748899] I/O error, dev mmcblk0, sector 15268912 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[    8.888912] mmc_erase: group start error -84, status 0x0
[    8.968848] mmc0: tried to HW reset card, got error -84
[    8.974296] I/O error, dev mmcblk0, sector 52674 op 0x9:(WRITE_ZEROES) flags 0x800 phys_seg 0 prio class 2
[    8.988284] I/O error, dev mmcblk0, sector 15268896 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[    9.109946] I/O error, dev mmcblk0, sector 15266800 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[    9.239413] I/O error, dev mmcblk0, sector 15266800 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[    9.248875] Buffer I/O error on dev mmcblk0, logical block 1908350, async page read
[    9.591435] I/O error, dev mmcblk0, sector 49416 op 0x0:(READ) flags 0x80700 phys_seg 5 prio class 2
[    9.604113] I/O error, dev mmcblk0, sector 49288 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 2
[    9.675592] I/O error, dev mmcblk0, sector 49224 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 2
[   10.002153] mmc_erase: erase error -84, status 0x0
[   10.086196] Buffer I/O error on dev mmcblk0p2, logical block 52, async page read
[   10.093657] Buffer I/O error on dev mmcblk0p2, logical block 53, async page read
[   10.109616] Buffer I/O error on dev mmcblk0p2, logical block 54, async page read
[   10.117168] Buffer I/O error on dev mmcblk0p2, logical block 55, async page read
[   10.304129] mmc0: tried to HW reset card, got error -84
[   10.404229] mmc0: tried to HW reset card, got error -84
[   10.411876] Buffer I/O error on dev mmcblk0p2, logical block 88, async page read
[   10.419538] Buffer I/O error on dev mmcblk0p2, logical block 89, async page read
[   10.428447] Buffer I/O error on dev mmcblk0p2, logical block 90, async page read
[   10.436359] Buffer I/O error on dev mmcblk0p2, logical block 91, async page read