防爆认证的标准

防爆标准：GB3836.1通用标准 GB3836.2隔爆标准 GB3836.3增安标准 GB3836.4本安标准 GB3836.9浇封标准

防爆型式：d（隔爆型） e（增安型） ia ib（本安型） ma mb （浇封型)

设备类别：I类：煤矿井下用电气设备； II类：除煤矿外的其他爆炸性气体环境用电气设备。 III类爆炸性粉尘

气体组别：I类:矿井甲烷 II类：IIA:丙烷 IIB：依稀 IIC：氢气

            III类：IIIA：可燃性飞絮  IIB：非导电性粉尘  IIIC：导电性粉尘

• 1

温度组别：爆炸性气体混合物的引燃温度是能被点燃的温度极限值。

防爆标志含义：防爆型式+设备类别+（气体组别）+温度组别

列子：EX d II C T6 (总标、防爆形式、爆炸性物质类别、爆炸性气体级别、设备最高表面温度100度）

隔爆原理：是指把能点燃爆炸性混合物的部件封闭在一个外壳内，该外壳能承受内部爆炸性混合物的爆炸压力并阻止和周围的爆炸性混合物传爆的电气设备

本安原理：通过限制电气设备电路的各种参数或采取保护措施来限制电路的火花放电能量和热能，使其在正常工作和规定的故障状态下产生的电火花和热效应均不能点燃周围环境的爆炸性混合物，从而实现电气防爆。

浇封原理：将电气设备有可能产生点燃爆炸性混合物的电弧、火花或高温的部分浇封在浇封剂中，避免这些电气部件与爆炸性混合物接触，从而使电气设备在正常运行或认可的过载和故障情况下均不能点燃周围的爆炸性混合物，浇封型电气设备有整台设备浇封的，也有部件浇封的。

办理流程：

客户提供产品详细资料给我们如提供电路图，爆炸图，零件图，总装图，原理图，PCB板图， 说明书
Explosion proof standard: gb3836.1 general standard gb3836.2 explosion proof standard gb3836.3 safety standard gb3836.4 intrinsic safety standard gb3836.9 pouring and sealing standard

Explosion proof type: D (explosion-proof) e (increased safety type) ia IB (intrinsically safe) MA MB (cast in seal type)

Equipment category: class I: electrical equipment for underground coal mine; class II: electrical equipment for explosive gas environment except coal mine. Explosive dust of category III

Gas group: class I: mine methane class II: IIA: propane IIB: Lean IIC: hydrogen

Class III: IIIA: Combustible floc IIB: non conductive dust IIIc: conductive dust

Temperature group: the ignition temperature of explosive gas mixture is the temperature limit value that can be ignited.

Meaning of explosion proof sign: explosion proof type + equipment category + (gas group) + temperature group

Column: ex D II C T6 (general standard, explosion-proof form, explosive substance category, explosive gas level, maximum surface temperature of equipment 100 degrees)

Explosion proof principle: refers to the electrical equipment that can close the components that can ignite explosive mixture in a shell which can bear the explosion pressure of the internal explosive mixture and prevent the explosion from spreading with the surrounding explosive mixture

Intrinsic safety principle: limit the spark discharge energy and heat energy of the circuit by limiting various parameters of electrical equipment circuit or take protective measures, so that the electric spark and thermal effect produced under normal operation and specified fault state can not ignite the explosive mixture of surrounding environment, so as to realize electrical explosion-proof.

Sealing principle: the electric equipment may produce arc, spark or high temperature part which may ignite explosive mixture in the pouring sealing agent to avoid contact between these electrical components and explosive mixture, so that the electrical equipment can not ignite the surrounding explosive mixture under normal operation or approved overload and failure. The pouring sealing type electrical equipment has the whole equipment pouring and sealing, There are also parts to be sealed.

Process:

The customer provides us with product details such as circuit diagram, explosion diagram, part drawing, general assembly drawing, schematic diagram, PCB board diagram and instruction manual