1 编写目的
在如今大数据的环境中,磁盘的性能和稳定性是非常重要的一个业务因素。在Linux系统中,smartctl是较为常用的磁盘检测工具。
本文基于Linux系统中smartctl进行分析,目的在于说明相关工具的使用,并对SMART(Self-Monitoring, Analysis and Reporting Technology)做一些分析。
本文使用的专用术语、定义,见表2.1。
表2.1
术语/定义 | 含义 |
SMART | Self-Monitoring, Analysis and Reporting Technology |
本文件应用了以下缩略语,见表2.2。
表2.2
缩略语 | 原 文 | 中文含义 |
SMART | Self-Monitoring, Analysis and Reporting Technology | 自监察分析及报告技术 |
|
|
|
|
|
|
smartctl是smartmontools-5.38-2.el5 rpm中的一个命令行工具,可以执行SMART任务:打印SMART self-test和error报告,开启或关闭SMART自动测试,触发磁盘self-test。
语法:
smartctl [options] device
device:
“/dev/hd[a-t]” IDE/ATA 磁盘
“/dev/sd[a-z]” SCSI devices磁盘。注意,对于SATA磁盘,由于是通过libata
库来访问,所以要增加参数“-d ata”。
参数按照不同的类型来分类。
-h 帮助信息
-V 版本信息
-i 打印基本信息(磁盘设备号、序列号、固件版本…)
-a 打印磁盘所有的SMART信息
-q TYPE 指定输出的安静模式。
TYPE可以有3种选择:
eorsonly 只打印错误日志。
slent 有任何打印。
nserial 不打印序列号
-d TYPE 指定磁盘的类型。如果没有指定,smartctl会根据磁盘的名字来
猜测磁盘类型。
-T TYPE 指定当发生错误时,smartctl的容忍程度,是否继续运行。
TYPE可以有4种选择:
conservative 一有错就会退出
normal 如果必须支持的SMART命令失败,则退出
permissive 忽略一次必须支持的SMART命令失败
verypermissive 忽略所有必须支持的SMART命令失败
-b TYPE 指定当发生校验错误时,smartctl的动作。
TYPE有3种选择:
warn 发出警告,继续执行
exit 退出smartctl
ignore 不发出告警,继续执行
-r TYPE smartmontools开发人员相关。
-n POWERMODE 指定当磁盘处于节能模式时,smartctl是否继续检查,
默认是不检查。
POWERMODE有4种选择:
never 检查
sleep 除了sleep模式,检查。
standby 除了sleep或standby模式,检查。
idle 除了sleep或standby或idle模式,见车。
-s on/off 打开或关闭磁盘的SMART功能
-o on/off 打开或关闭SMART自动离线检测,该功能每4小时就会自动扫描磁盘是
否有缺陷。
-S on/off 打开或关闭“自动保存厂商指定属性”功能。
-H 报告磁盘的是否健康。如果报告不健康,则说明磁盘已经损坏或会在24小时
内损坏。
-c 显示磁盘支持的普通SMART功能,以及这些功能当前的状态。
-A 显示磁盘支持的厂商指定SMART特性。这些特性的编号从1-253,并且有指
定的名字。
-l TYPE 指定显示的log类型。
TYPE有4种选择:
error 只显示error log。
selftest 只显示selftest log
selective 只显示selective self-test log
directory 只显示Log Directory
-v N,OPTION 显示厂商指定SMART特性N时,使用厂商相关的显示方式。
-F TYPE 设置smartctl的行为,当出现一些已知但还没有解决的硬件或软件bug时,
smartctl应该怎么做。
-P TYPE 设置smartctl是否对磁盘使用数据库中已有的参数。
-t TEST 立刻执行测试,可以和-C参数一起使用。
TEST可以有以下几个选择:
offline 离线测试。可以在挂载文件系统的磁盘上使用
short 短时间测试。可以在挂载文件系统的磁盘上使用。
long 长时间测试。可以在挂载文件系统的磁盘上使用。
conveyance [ATA only]传输zi测试。可以在挂载文件系统的磁盘上使用。
select, N-M
select, N+SIZE [ATA only]有选择性测试,测试磁盘的部分LBA。N表示
LBA编号,M表示结束LBA编号,SIZE表示测试的LBA
范围。
-C 在captive模式下运行测试。
注意:(1)-C必须配合-t一起使用,但如果是-t offline,则-C不生效。
(2)-C会使得磁盘很忙,所以最好是在没有挂载文件系统的磁盘上使用。
-X 中断no-captive模式下运行的测试。
查看/dev/sda当前整体监控状态。PASSED表示健康,否则意味着磁盘已经故障,或很快就会发生故障。
smartctl -H /dev/sda
打印/dev/sda所有的SMART信息。
martctl -a /dev/sda
相当于依次执行:
smartctl –i /dev/sda
smartctl -c /dev/sda
smartctl -A /dev/sda
smartctl -l error /dev/sda
smartctl -l selftest /dev/sda
smartctl -l selective /dev/sda
打开或关闭/dev/sda 的SMART功能。
smartctl -s on/off /dev/sda
查看当前SMART功能是否开启,可以使用 –i 参数。
smartctl -i /dev/sda
对/dev/sda进行离线测试,它的结果主要用来更新SMART 属性。
smartctl -t offline /dev/sda
对/dev/sda进行短时间测试。
smartctl -t short /dev/sda
3.2.5.1 观察测试进度
通过-c 参数,可以观察到测试的进度:
# smartctl -c /dev/sda
…
Self-test execution status: ( 242) Self-test routine in progress…
20% of test remaining.
…
3.2.5.2 观察测试结果
通过-l selftest 参数,可以看到/dev/sda测试的结果记录:
“#1”代表的那一次测试,Completed without error表示完成,没有错误。
“#2”代表的那一次测试,Aborted by host表示测试被用户终止,还有90%没有完成。
# smartctl -l selftest /dev/sda
…
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 9535 -
# 2 Extended offline Aborted by host 90% 9534 -
…
通过-A参数,可以看到/dev/sda SMART属性值。
smartctl -A /dev/sda
使用smartctl -A /dev/sda能看到很多磁盘的SMART 属性,可以知道磁盘是否健康。
下面是一个列表,可以知道每个属性的具体含义:
ID | Hex | Attribut name | Description |
01 | 0x01 | Read Error Rate | (Vendor specific raw value.) Stores data related to the rate of hardware read errors that occurred when reading data from a disk surface. The raw value has different structure for different vendors and is often not meaningful as a decimal number. |
02 | 0x02 | Throughput Performance | Overall (general) throughput performance of a hard disk drive. If the value of this attribute is decreasing there is a high probability that there is a problem with the disk. |
03 | 0x03 | Spin-Up Time | Average time of spindle spin up (from zero RPM to fully operational [millisecs]). |
04 | 0x04 | Start/Stop Count | A tally of spindle start/stop cycles. The spindle turns on, and hence the count is increased, both when the hard disk is turned on after having before been turned entirely off (disconnected from power source) and when the hard disk returns from having previously been put to sleep mode. |
05 | 0x05 | Reallocated Sectors Count | Count of reallocated sectors. When the hard drive finds a read/write/verification error, it marks that sector as “reallocated” and transfers data to a special reserved area (spare area). This process is also known as remapping, and reallocated sectors are called “remaps”. The raw value normally represents a count of the bad sectors that have been found and remapped. Thus, the higher the attribute value, the more sectors the drive has had to reallocate. This allows a drive with bad sectors to continue operation; however, a drive which has had any reallocations at all is significantly more likely to fail in the near future.[2]While primarily used as a metric of the life expectancy of the drive, this number also affects performance. As the count of reallocated sectors increases, the read/write speed tends to become worse because the drive head is forced to seek to the reserved area whenever a remap is accessed. A workaround which will preserve drive speed at the expense of capacity is to create a disk partition over the region which contains remaps and instruct the operating system to not use that partition. |
06 | 0x06 | Read Channel Margin | Margin of a channel while reading data. The function of this attribute is not specified. |
07 | 0x07 | Seek Error Rate | (Vendor specific raw value.) Rate of seek errors of the magnetic heads. If there is a partial failure in the mechanical positioning system, then seek errors will arise. Such a failure may be due to numerous factors, such as damage to a servo, or thermal widening of the hard disk. The raw value has different structure for different vendors and is often not meaningful as a decimal number. |
08 | 0x08 | Seek Time Performance | Average performance of seek operations of the magnetic heads. If this attribute is decreasing, it is a sign of problems in the mechanical subsystem. |
09 | 0x09 | Power-On Hours (POH) | Count of hours in power-on state. The raw value of this attribute shows total count of hours (or minutes, or seconds, depending on manufacturer) in power-on state. |
10 | 0x0A | Spin Retry Count | Count of retry of spin start attempts. This attribute stores a total count of the spin start attempts to reach the fully operational speed (under the condition that the first attempt was unsuccessful). An increase of this attribute value is a sign of problems in the hard disk mechanical subsystem. |
11 | 0x0B | Recalibration Retries orCalibration Retry Count | This attribute indicates the count that recalibration was requested (under the condition that the first attempt was unsuccessful). An increase of this attribute value is a sign of problems in the hard disk mechanical subsystem. |
12 | 0x0C | Power Cycle Count | This attribute indicates the count of full hard disk power on/off cycles. |
13 | 0x0D | Soft Read Error Rate | Uncorrected read errors reported to the operating system. |
180 | 0xB4 | Unused Reserved Block Count Total | “Pre-Fail” Attribute used at least in HP devices. |
183 | 0xB7 | SATA Downshift Error Count | Western Digital and Samsung attribute. |
184 | 0xb8 | End-to-End error / IOEDC | This attribute is a part of Hewlett-Packard’s SMART IV technology, as well as part of other vendors’ IO Error Detection and Correction schemas, and it contains a count of parity errors which occur in the data path to the media via the drive’s cache RAM. |
185 | 0xB9 | Head Stability | Western Digital attribute. |
186 | 0xBA | Induced Op-Vibration Detection | Western Digital attribute. |
187 | 0xBB | Reported Uncorrectable Errors | The count of errors that could not be recovered using hardware ECC . |
188 | 0xBC | Command Timeout | The count of aborted operations due to HDD timeout. Normally this attribute value should be equal to zero and if the value is far above zero, then most likely there will be some serious problems with power supply or an oxidized data cable. |
189 | 0xBD | High Fly Writes | HDD producers implement a Fly Height Monitor that attempts to provide additional protections for write operations by detecting when a recording head is flying outside its normal operating range. If an unsafe fly height condition is encountered, the write process is stopped, and the information is rewritten or reallocated to a safe region of the hard drive. This attribute indicates the count of these errors detected over the lifetime of the drive. This feature is implemented in most modern Seagate drives and some of Western Digital’s drives, beginning with the WD Enterprise WDE18300 and WDE9180 Ultra2 SCSI hard drives, and will be included on all future WD Enterprise products.
|
190 | 0xBE | Airflow Temperature (WDC) resp.Airflow Temperature Celsius (HP) | Airflow temperature on Western Digital HDs (Same as temp. [C2], but current value is 50 less for some models. Marked as obsolete.) |
191 | 0xBF | G-sense Error Rate | The count of errors resulting from externally-induced shock & vibration. |
192 | 0xC0 | Power-off Retract Countor Emergency Retract Cycle Count(Fujitsu) | Count of times the heads are loaded off the media. Heads can be unloaded without actually powering off. |
193 | 0xC1 | Load Cycle Count orLoad/Unload Cycle Count(Fujitsu) | Count of load/unload cycles into head landing zone position. The typical lifetime rating for laptop (2.5-in) hard drives is 300,000 to 600,000 load cycles. Some laptop drives are programmed to unload the heads whenever there has not been any activity for about five seconds.Many Linux installations write to the file system a few times a minute in the background. As a result, there may be 100 or more load cycles per hour, and the load cycle rating may be exceeded in less than a year
|
194 | 0xC2 | Temperatureresp.Temperature Celsius | Current internal temperature. |
195 | 0xC3 | Hardware ECC Recovered | (Vendor specific raw value.) The raw value has different structure for different vendors and is often not meaningful as a decimal number. |
196 | 0xC4 | Reallocation Event Count | Count of remap operations. The raw value of this attribute shows the total count of attempts to transfer data from reallocated sectors to a spare area. Both successful & unsuccessful attempts are counted. |
197 | 0xC5 | Current Pending Sector Count | Count of “unstable” sectors (waiting to be remapped, because of read errors). If an unstable sector is subsequently read successfully, this value is decreased and the sector is not remapped. Read errors on a sector will not remap the sector (since it might be readable later); instead, the drive firmware remembers that the sector needs to be remapped, and remaps it the next time it’s written. |
198 | 0xC6 | Uncorrectable Sector Countor Offline Uncorrectableor Off-Line Scan Uncorrectable Sector Count
| The total count of uncorrectable errors when reading/writing a sector. A rise in the value of this attribute indicates defects of the disk surface and/or problems in the mechanical subsystem. |
199 | 0xC7 | UltraDMA CRC Error Count | The count of errors in data transfer via the interface cable as determined by ICRC (Interface Cyclic Redundancy Check). |
200 | 0xC8 | Multi-Zone Error Rate | The count of errors found when writing a sector. The higher the value, the worse the disk’s mechanical condition is. |
200 | 0xC8 | Write Error Rate (Fujitsu) | The total count of errors when writing a sector. |
201 | 0xC9 | Soft Read Error Rate or TA Counter Detected
| Count of off-track errors. |
202 | 0xCA | Data Address Mark errorsor TA Counter Increased
| Count of Data Address Mark errors (or vendor-specific). |
203 | 0xCB | Run Out Cancel | Count of ECC errors |
204 | 0xCC | Soft ECC Correction | Count of errors corrected by software ECC |
205 | 0xCD | Thermal Asperity Rate (TAR) | Count of errors due to high temperature. |
206 | 0xCE | Flying Height | Height of heads above the disk surface. A flying height that’s too low increases the chances of a head crash while a flying height that’s too high increases the chances of a read/write error. |
207 | 0xCF | Spin High Current | Amount of surge current used to spin up the drive. |
208 | 0xD0 | Spin Buzz | Count of buzz routines needed to spin up the drive due to insufficient power. |
209 | 0xD1 | Offline Seek Performance | Drive’s seek performance during its internal tests. |
210 | 0xD2 | Unkonw | (found in a Maxtor 6B200M0 200GB and Maxtor 2R015H1 15GB disks) |
211 | 0xD3 | Vibration During Write | Vibration During Write |
212 | 0xD4 | Shock During Write | Shock During Write |
220 | 0xDC | Disk Shift | Distance the disk has shifted relative to the spindle (usually due to shock or temperature). Unit of measure is unknown. |
222 | 0xDE | Loaded Hours | Time spent operating under data load (movement of magnetic head armature) |
223 | 0xDF | Load/Unload Retry Count | Count of times head changes position. |
224 | 0xE0 | Load Friction | Resistance caused by friction in mechanical parts while operating. |
225 | 0xE1 | Load/Unload Cycle Count | Total count of load cycles |
226 | 0xE2 | Load ‘In’-time | Total time of loading on the magnetic heads actuator (time not spent in parking area). |
227 | 0xE3 | Torque Amplification Count | Count of attempts to compensate for platter speed variations |
228 | 0xE4 | Power-Off Retract Cycle | The count of times the magnetic armature was retracted automatically as a result of cutting power. |
230 | 0xE6 | GMR Head Amplitude | Amplitude of “thrashing” (distance of repetitive forward/reverse head motion) |
231 | 0xE7 | Temperature | Drive Temperature |
232 | 0xE8 | Endurance Remaining | Number of physical erase cycles completed on the drive as a percentage of the maximum physical erase cycles the drive is designed to endure |
232 | 0xE8 | Available Reserved Space | Intel SSD reports the number of available reserved space as a percentage of reserved space in a brand new SSD. |
233 | 0xE9 | Power-On Hours | Number of hours elapsed in the power-on state. |
233 | 0xE9 | Media Wearout Indicator | Intel SSD reports a normalized value of 100 (when the SSD is new) and declines to a minimum value of 1. It decreases while the NAND erase cycles increase from 0 to the maximum-rated cycles. |
240 | 0xF0 | Head Flying Hours | Time while head is positioning |
240 | 0xF0 | Transfer Error Rate(Fujitsu) | Count of times the link is reset during a data transfer. |
241 | 0xF1 | Total LBAs Written | Total count of LBAs written |
242 | 0xF2 | Total LBAs Read | Total count of LBAs read. |
250 | 0xFA | Read Error Retry Rate | Count of errors while reading from a disk |
254 | 0xFE | Free Fall Protection | ount of “Free Fall Events” detected |
使用smartctl –t offline/short/long 可以指定磁盘进行自测。
offline:
这个是默认的自测。
short:
短时自测的目的是快速确认磁盘是否故障。
测试过程有很多项目,都是磁盘厂商自定义的,比如下面的项目:
a) 电气测试项目,测试磁盘内部的电路。具体测试细节有磁盘厂商自己指定,比如:
A) 缓存测试。
B) 读、写电路测试。
C) 读、写磁头测试。
b) 寻道、伺服测试项目,测试磁盘在数据磁道上的寻找和伺服能。
c) 读、校验测试项目,测试磁盘对部分或全盘的读能力。
long:
称为扩展的自测试。测试的项目和short类型,但是时间长得多