Preferences配置说明

<Python>
	// While you can edit this file, it’s best to put your changes in
	//    "User/Preferences.sublime-settings", which overrides the settings in here.
	//
	// Settings may also be placed in file type specific options files, for
	// example, in Packages/Python/Python.sublime-settings for python files.
{
	// Sets the colors used within the text area
	// 主题文件的路径
    "color_scheme": "Packages/Color Scheme – Default/Monokai.tmTheme",
    // Note that the font_face and font_size are overriden in the platform
    // specific settings file, for example,    "Preferences (Linux).sublime-settings”.
    // Because of this, setting them here will have no effect: you must set them
    // in your User File Preferences.
    // 设置字体和大小,必须在Settings-User里重写,这里设置没有任何效果
    "font_face": "Consolas",
    "font_size": 12,
    // Valid options are    "no_bold",    "no_italic",    "no_antialias",    "gray_antialias",
    //    "subpixel_antialias” and    "no_round” (OS X only)
    // 字体选项:no_bold不显示粗体字,no_italic不显示斜体字,no_antialias和no_antialias关闭反锯齿
    // subpixel_antialias和no_round是OS X系统独有的
    "font_options": [],
    // Characters that are considered to separate words
    // 在文字上双击会全选当前的内容,如果里面出现以下字符,就会被截断
    "word_separators": "./\\()\"'-:,.;<>~!@#$%^&*|+=[]{}`~?",
    // Set to false to prevent line numbers being drawn in the gutter
    // 是否显示行号
    "line_numbers": true,
    // Set to false to hide the gutter altogether
    // 是否显示行号边栏
    "gutter": true,
    // Spacing between the gutter and the text
    //行号边栏和文字的间距
    "margin": 4,
    // Fold buttons are the triangles shown in the gutter to fold regions of text
    // 是否显示代码折叠按钮
    "fold_buttons": true,
    // Hides the fold buttons unless the mouse is over the gutter
    // 不管鼠标在不在行号边栏,代码折叠按钮一直显示
    "fade_fold_buttons": true,
    // Columns in which to display vertical rulers
    //列显示垂直标尺,在中括号里填入数字,宽度按字符计算
    "rulers": [],
    // Set to true to turn spell checking on by default
    // 是否打开拼写检查
    "spell_check": false,
    // The number of spaces a tab is considered equal to
    // Tab键制表符宽度
    "tab_size": 4,
    // Set to true to insert spaces when tab is pressed
    // 设为true时,缩进和遇到Tab键时使用空格替代
    "translate_tabs_to_spaces": false,
    // If translate_tabs_to_spaces is true, use_tab_stops will make tab and
    // backspace insert/delete up to the next tabstop
    // translate_tabs_to_spaces设置为true,Tab和Backspace的删除/插入作用于制表符宽度
    // 否则作用于单个空格
    "use_tab_stops": true,
    // Set to false to disable detection of tabs vs. spaces on load
    // false时禁止在载入的时候检测制表符和空格
    "detect_indentation": true,
    // Calculates indentation automatically when pressing enter
    // 按回车时,自动与制表位对齐
    "auto_indent": true,
    // Makes auto indent a little smarter, e.g., by indenting the next line
    // after an if statement in C. Requires auto_indent to be enabled.
    //针对C语言的
    "smart_indent": false,
    // Adds whitespace up to the first open bracket when indenting. Requires
    // auto_indent to be enabled.
    // 需要启用auto_indent,第一次打开括号缩进时插入空格?(没测试出来效果…)
    "indent_to_bracket": true,
    // Trims white space added by auto_indent when moving the caret off the
    // line.
    // 显示对齐的白线是否根据回车、tab等操作自动填补
    "trim_automatic_white_space": true,
    // Disables horizontal scrolling if enabled.
    // May be set to true, false, or    "auto", where it will be disabled for
    // source code, and otherwise enabled.
    // 是否自动换行,如果选auto,需要加双引号
    "word_wrap": false,
    // Set to a value other than 0 to force wrapping at that column rather than the
    // window width
    // 设置窗口内文字区域的宽度
    "wrap_width": 0,
    // Set to false to prevent word wrapped lines from being indented to the same
    // level
    // 防止被缩进到同一级的字换行
    "indent_subsequent_lines": true,
    // Draws text centered in the window rather than left aligned
    // 如果没有定义过,则文件居中显示(比如新建的文件)
    "draw_centered": false,
    // Controls auto pairing of quotes, brackets etc
    // 自动匹配引号,括号等
    "auto_match_enabled": true,
    // Word list to use for spell checking
    // 拼写检查的单词列表路径
    "dictionary": "Packages/Language – English/en_US.dic",
    // Set to true to draw a border around the visible rectangle on the minimap.
    // The color of the border will be determined by the    "minimapBorder” key in
    // the color scheme
    // 代码地图的可视区域部分是否加上边框,边框的颜色可在配色方案上加入minimapBorder键
    "draw_minimap_border": false,
    // If enabled, will highlight any line with a caret
    // 突出显示当前光标所在的行
    "highlight_line": false,
    // Valid values are    "smooth",    "phase",    "blink",    "wide” and    "solid”.
    // 设置光标闪动方式
    "caret_style": "smooth",
    // Set to false to disable underlining the brackets surrounding the caret
    // 是否特殊显示当前光标所在的括号、代码头尾闭合标记
    "match_brackets": true,
    // Set to false if you’d rather only highlight the brackets when the caret is
    // next to one
    // 设为false时,只有光标在括号或头尾闭合标记的两端时,match_brackets才生效
    "match_brackets_content": true,
    // Set to false to not highlight square brackets. This only takes effect if
    // match_brackets is true
    // 是否突出显示圆括号,match_brackets为true生效
    "match_brackets_square": false,
    // Set to false to not highlight curly brackets. This only takes effect if
    // match_brackets is true
    // 是否突出显示大括号,match_brackets为true生效
    "match_brackets_braces": false,
    // Set to false to not highlight angle brackets. This only takes effect if
    // match_brackets is true
    // 是否突出显示尖括号,match_brackets为true生效
    "match_brackets_angle": false,
    // Enable visualization of the matching tag in HTML and XML
    // html和xml下突出显示光标所在标签的两端,影响HTML、XML、CSS等
    "match_tags": true,
    // Highlights other occurrences of the currently selected text
    // 全文突出显示和当前选中字符相同的字符
    "match_selection": true,
    // 设置每一行到顶部,以像素为单位的间距,效果相当于行距
    "line_padding_top": 1,
    // 设置每一行到底部,以像素为单位的间距,效果相当于行距
    "line_padding_bottom": 1,
    // 设置为false时,滚动到文本的最下方时,没有缓冲区
    "scroll_past_end": true,
    // 控制向上或向下到第一行或最后一行时发生什么(没明白也没试出来)
    "move_to_limit_on_up_down": false,
    // 按space或tab时,实际会产生白色的点(一个空格一个点)或白色的横线(tab_size设置的制表符的宽度),选中状态下才能看到
    // 设置为none时,什么情况下都不显示这些点和线
    // 设置为selection时,只显示选中状态下的点和线
    // 设置为all时,则一直显示
    "draw_white_space": "selection",
    // 制表位的对齐白线是否显示,颜色可在主题文件里设置(guide,activeGuide,stackGuide)
    "draw_indent_guides": true,
    // 制表位的对齐白线,draw_normal为一直显示,draw_active为只显示当前光标所在的代码控制域
    "indent_guide_options": ["draw_normal"],
    // 为true时,保存文件时会删除每行结束后多余的空格
    "trim_trailing_white_space_on_save": false,
    // 为true时,保存文件时光标会在文件的最后向下换一行
    "ensure_newline_at_eof_on_save": false,
    // 切换到其它文件标签或点击其它非本软件区域,文件自动保存
    "save_on_focus_lost": false,
    // 编码时不能自动检测编码时,将自动检测ASCII, UTF-8 和 UTF-16
    "fallback_encoding": "Western (Windows 1252)",
    // 默认编码格式
    "default_encoding": "UTF-8",
    // 包含空字节的文件被打开默认为十六进制
    "enable_hexadecimal_encoding": true,
    // 每一行结束的时候用什么字符做终止符
    "default_line_ending": "system",
    // 设置为enabled时,在一个字符串间按Tab将插入一个制表符
    // 设置为true时,按Tab会根据前后环境进行代码自动匹配填补
    "tab_completion": true,
    // 代码提示
    "auto_complete": true,
    // 代码提示的大小限制
    "auto_complete_size_limit": 4194304,
    // 代码提示延迟显示
    "auto_complete_delay": 50,
    // 代码提示的控制范围
    "auto_complete_selector": "source – comment",
    // 触发代码提示的其他情况
    "auto_complete_triggers": [ {"selector": "text.html", "characters": "<"} ],
    // 设为false时,选择提示的代码按回车或点击可以输出出来,但选择true时不会输出而是直接换行
    "auto_complete_commit_on_tab": false,
    "auto_complete_with_fields": false,
    // 设置为false,使用Shift + tab总是插入制表符
    "shift_tab_unindent": true,
    // 选中的文本按Ctrl + f时,自动复制到查找面板的文本框里
    "find_selected_text": true,
    // Data\Packages\Theme – Default\Default.sublime-theme控制软件的主题
    "theme": "Default.sublime-theme",
    // 滚动的速度
    "scroll_speed": 1.0,
    // 左边边栏文件夹动画
    "tree_animation_enabled": true,
    // 标签页的关闭按钮
    "show_tab_close_buttons": true,
    // Valid values are    "system",    "enabled” and    "disabled”
    // 水平垂直滚动条:system和disabled为默认显示方式,enabled为自动隐藏显示
    "overlay_scroll_bars": "system",
 }
</Python>
©️2020 CSDN 皮肤主题: 编程工作室 设计师: CSDN官方博客 返回首页
实付0元
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、C币套餐、付费专栏及课程。

余额充值