openwrt接入usb 4g网络

最新推荐文章于 2024-02-23 17:17:38 发布

eric.pyt

最新推荐文章于 2024-02-23 17:17:38 发布

阅读量1.4w

点赞数 1

分类专栏： openWRT

本文链接：https://blog.csdn.net/pyt1234567890/article/details/107584361

版权

openWRT 专栏收录该内容

21 篇文章 11 订阅

订阅专栏

openwrt 稍加配置可以接入usb 4G网卡，进行上网。本节利用手机usb网络共享功能，进行配置操作
usb 网络共享、usb 4G网卡、pcie 4G网卡，其实本质上透过rndis驱动进行网络转发
openwrt版本19.07

openwrt rndis驱动配置，开启kmod-usb-net-rndis


 .config - OpenWrt Configuration
 > Kernel modules > USB Support ────────────────────────────────────────────────────────────────
  ┌────────────────────────────────────── USB Support ───────────────────────────────────────┐
  │  Arrow keys navigate the menu.  <Enter> selects submenus ---> (or empty submenus ----).  │  
  │  Highlighted letters are hotkeys.  Pressing <Y> includes, <N> excludes, <M> modularizes  │  
  │  features.  Press <Esc><Esc> to exit, <?> for Help, </> for Search.  Legend: [*]         │  
  │  built-in  [ ] excluded  <M> module  < > module capable                                  │  
  │ ┌────────^(-)──────────────────────────────────────────────────────────────────────────┐ │  
  │ │        <*> kmod-usb-net............... Kernel modules for USB-to-Ethernet convertors │ │  
  │ │        < >   kmod-usb-net-asix...... Kernel module for USB-to-Ethernet Asix convertor│ │  
  │ │        < >   kmod-usb-net-asix-ax88179                                               │ │  
  │ │        < >   kmod-usb-net-cdc-eem..................... Support for CDC EEM connection│ │  
  │ │        -*-   kmod-usb-net-cdc-ether.............. Support for cdc ethernet connection│ │  
  │ │        < >   kmod-usb-net-cdc-mbim..................... Kernel module for MBIM Device│ │  
  │ │        < >   kmod-usb-net-cdc-ncm..................... Support for CDC NCM connection│ │  
  │ │        < >   kmod-usb-net-cdc-subset...... Support for CDC Ethernet subset connection│ │  
  │ │        < >   kmod-usb-net-dm9601-ether........ Support for DM9601 ethernet connection│ │  
  │ │        < >   kmod-usb-net-hso.. Kernel module for Option USB High Speed Mobile Device│ │  
  │ │        < >   kmod-usb-net-huawei-cdc-ncm....... Support for Huawei CDC NCM connection│ │  
  │ │        < >   kmod-usb-net-ipheth..................... Apple iPhone USB Ethernet drive│ │  
  │ │        < >   kmod-usb-net-kalmia................... Samsung Kalmia based LTE USB mode│ │  
  │ │        < >   kmod-usb-net-kaweth.. Kernel module for USB-to-Ethernet Kaweth convertor│ │  
  │ │        < >   kmod-usb-net-mcs7830                                                    │ │  
  │ │        < >   kmod-usb-net-pegasus                                                    │ │  
  │ │        < >   kmod-usb-net-pl.................. Prolific PL-2301/2302/25A1 based cable│ │  
  │ │        < >   kmod-usb-net-qmi-wwan.................................... QMI WWAN drive│ │  
  │ │        <*>   kmod-usb-net-rndis......................... Support for RNDIS connection│ │  
  │ │        < >   kmod-usb-net-rtl8150                                                    │ │  
  │ └────────v(+)──────────────────────────────────────────────────────────────────────────┘ │  
  ├──────────────────────────────────────────────────────────────────────────────────────────┤  
  │                 <Select>    < Exit >    < Help >    < Save >    < Load >                 │  
  └──────────────────────────────────────────────────────────────────────────────────────────┘

手机接入usb host，并开启usb网络共享功能，查看网络接口

root@OpenWrt:~# ifconfig -a
br-lan    Link encap:Ethernet  HWaddr 12:34:56:78:90:01
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fd03:43b7:d448::1/60 Scope:Global
          inet6 addr: fe80::1034:56ff:fe78:9001/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1261 errors:0 dropped:0 overruns:0 frame:0
          TX packets:432 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:104083 (101.6 KiB)  TX bytes:53131 (51.8 KiB)

eth0      Link encap:Ethernet  HWaddr 12:34:56:78:90:01
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1454 errors:0 dropped:0 overruns:0 frame:0
          TX packets:440 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:141662 (138.3 KiB)  TX bytes:55733 (54.4 KiB)
          Interrupt:5

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:96 errors:0 dropped:0 overruns:0 frame:0
          TX packets:96 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:6528 (6.3 KiB)  TX bytes:6528 (6.3 KiB)

usb0      Link encap:Ethernet  HWaddr 2A:F1:BF:AE:3C:5A
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan0     Link encap:Ethernet  HWaddr 12:34:56:78:90:00
          inet6 addr: fe80::1034:56ff:fe78:9000/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:564 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:69320 (67.6 KiB)

usb0 ，即为手机网络端口。但此时用ifconfig 是无法查看到！
需要执行如下：

root@OpenWrt:~# udhcpc -i usb0
udhcpc: started, v1.31.1
udhcpc: sending discover
udhcpc: sending discover
udhcpc: sending select for 192.168.42.3
udhcpc: lease of 192.168.42.3 obtained, lease time 3600
udhcpc: ifconfig usb0 192.168.42.3 netmask 255.255.255.0 broadcast 192.168.42.255
udhcpc: setting default routers: 192.168.42.129

此时，用ifconfig可查看到usb0网络端口。
虽然usb 网络端口已经加载，但WLAN 和 LAN都是无法上网的，同时也是无法ping网络

root@OpenWrt:~# ping www.baidu.com
ping: bad address 'www.baidu.com'

进入luci，添加usb0物理网络接口，并将usb0，映射到wlan 和 lan后，才可以接通网络
配置之前，先看下/etc/config/network，和/etc/config/wireless 两个文件，以便修改后，进行对比
network：

config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'

config globals 'globals'
        option ula_prefix 'fd03:43b7:d448::/48'

config interface 'lan'
        option type 'bridge'
        option ifname 'eth0'
        option proto 'static'
        option ipaddr '192.168.1.1'
        option netmask '255.255.255.0'
        option ip6assign '60'

config device 'lan_eth0_dev'
        option name 'eth0'
        option macaddr '12:34:56:78:90:01'

config switch
        option name 'switch0'
        option reset '1'
        option enable_vlan '0'

wireless：

config wifi-device 'radio0'
        option type 'mac80211'
        option channel '11'
        option hwmode '11g'
        option path 'platform/10300000.wmac'
        option htmode 'HT20'
        option disabled '0'

config wifi-iface 'default_radio0'
        option device 'radio0'
        option network 'lan'
        option mode 'ap'
        option ssid 'OpenWrt'
        option encryption 'none'

添加网络接口usb0
进入luci->网络->接口，选择usb0接口，命名为4g
在这里插入图片描述

保存应用后，网络可以ping

root@OpenWrt:~# ping www.baidu.com
PING www.baidu.com (180.101.49.11): 56 data bytes
64 bytes from 180.101.49.11: seq=0 ttl=51 time=15.264 ms
64 bytes from 180.101.49.11: seq=1 ttl=51 time=21.160 ms
64 bytes from 180.101.49.11: seq=2 ttl=51 time=21.360 ms
^C
--- www.baidu.com ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 15.264/19.261/21.360 ms

但无线还没有网络
进入luci->网络->无线，添加无线网络4g
在这里插入图片描述

保存并应用，，之后无线就可以进行上网了

此时，再查看network 和 wireless 配置文件
network:

config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'

config globals 'globals'
        option ula_prefix 'fd03:43b7:d448::/48'

config interface 'lan'
        option type 'bridge'
        option ifname 'eth0'
        option proto 'static'
        option ipaddr '192.168.1.1'
        option netmask '255.255.255.0'
        option ip6assign '60'

config device 'lan_eth0_dev'
        option name 'eth0'
        option macaddr '12:34:56:78:90:01'

config switch
        option name 'switch0'
        option reset '1'
        option enable_vlan '0'

config interface '4g'
        option ifname 'usb0'
        option proto 'dhcp'
        option type 'bridge'

wireless：

config wifi-device 'radio0'
        option type 'mac80211'
        option channel '11'
        option hwmode '11g'
        option path 'platform/10300000.wmac'
        option htmode 'HT20'
        option disabled '0'

config wifi-iface 'default_radio0'
        option device 'radio0'
        option mode 'ap'
        option ssid 'OpenWrt'
        option encryption 'none'
        option network 'lan 4g'

对比配置之前，
network 中，多了物理网络接口4g(usb0)
wireless中，无线的网络来源多了新增加的 4g.

如果将这部分配置，在编译openwrt的时候就加入进去，则无需再手动进行配置
修改源码文件，openwrt/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
在对应的板子配置下面（这里用的板子为mediatek,linkit-smart-7688）添加
ucidef_set_interface_wan “usb0”

	mediatek,linkit-smart-7688|\
	onion,omega2p|\
	onion,omega2|\
	ravpower,rp-wd009|\
	tama,w06|\
	tplink,re200-v2|\
	tplink,re220-v2|\
	tplink,re305-v1|\
	tplink,tl-mr3020-v3|\
	tplink,tl-wr802n-v4|\
	tplink,tl-wa801nd-v5|\
	widora,neo-16m|\
	widora,neo-32m)
		ucidef_add_switch "switch0"
		ucidef_add_switch_attr "switch0" "enable" "false"
		ucidef_set_interface_lan "eth0"

		# eric++
		ucidef_set_interface_wan "usb0"
		;;

编译完成，再次进入系统查看ifconfig，usb0网络已经自动加入☺

root@OpenWrt:/etc/config# ifconfig
br-lan    Link encap:Ethernet  HWaddr 12:34:56:78:90:01
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::1034:56ff:fe78:9001/64 Scope:Link
          inet6 addr: fd34:edd9:e34f::1/60 Scope:Global
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3962 errors:0 dropped:4 overruns:0 frame:0
          TX packets:2775 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:557195 (544.1 KiB)  TX bytes:1618571 (1.5 MiB)

eth0      Link encap:Ethernet  HWaddr 12:34:56:78:90:01
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2394 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1530 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:323501 (315.9 KiB)  TX bytes:695464 (679.1 KiB)
          Interrupt:5

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:338 errors:0 dropped:0 overruns:0 frame:0
          TX packets:338 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:29303 (28.6 KiB)  TX bytes:29303 (28.6 KiB)

usb0      Link encap:Ethernet  HWaddr 12:34:56:78:90:00
          inet addr:192.168.42.149  Bcast:192.168.42.255  Mask:255.255.255.0
          inet6 addr: fe80::1034:56ff:fe78:9000/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1855 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2228 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1050610 (1.0 MiB)  TX bytes:459302 (448.5 KiB)

wlan0     Link encap:Ethernet  HWaddr 12:34:56:78:90:00
          inet6 addr: fe80::1034:56ff:fe78:9000/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1767 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2248 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:310018 (302.7 KiB)  TX bytes:1090399 (1.0 MiB)

查看network，已经多出了WLAN部分

config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'

config globals 'globals'
        option ula_prefix 'fd34:edd9:e34f::/48'

config interface 'lan'
        option type 'bridge'
        option ifname 'eth0'
        option proto 'static'
        option ipaddr '192.168.1.1'
        option netmask '255.255.255.0'
        option ip6assign '60'

config device 'lan_eth0_dev'
        option name 'eth0'
        option macaddr '12:34:56:78:90:01'

config interface 'wan'
        option ifname 'usb0'
        option proto 'dhcp'

config device 'wan_usb0_dev'
        option name 'usb0'
        option macaddr '12:34:56:78:90:00'

config interface 'wan6'
        option ifname 'usb0'
        option proto 'dhcpv6'

config switch
        option name 'switch0'
        option reset '1'
        option enable_vlan '0'

此时无线也是可以上网的哦~~~~~，不明所以然…

以上操作只是保证能够正常上网，但是如若是4GPCIE网卡，比如用的是EC20等，还需要对内核进行配置，使能ttyUSB或者ttyACM。用于模块AT配置。

make kernel_menuconfig
Device Drivers > USB support > USB Modem (CDC ACM) support

 .config - Linux/mips 4.14.195 Kernel Configuration                           
 > Device Drivers > USB support ───────────────────────────────────────────── 
  ┌───────────────────────────── USB support ─────────────────────────────┐   
  │  Arrow keys navigate the menu.  <Enter> selects submenus ---> (or     │   
  │  empty submenus ----).  Highlighted letters are hotkeys.  Pressing    │   
  │  <Y> includes, <N> excludes, <M> modularizes features.  Press         │   
  │  <Esc><Esc> to exit, <?> for Help, </> for Search.  Legend: [*]       │   
  │ ┌────^(-)───────────────────────────────────────────────────────────┐ │   
  │ │    < >   SL811HS HCD support                                      │ │   
  │ │    < >   R8A66597 HCD support                                     │ │   
  │ │    [ ]   HCD test mode support                                    │ │   
  │ │          *** USB Device Class drivers ***                         │ │   
  │ │    <*>   USB Modem (CDC ACM) support                              │ │   
  │ │    < >   USB Printer support                                      │ │   
  │ │    < >   USB Wireless Device Management support                   │ │   
  │ │    < >   USB Test and Measurement Class support                   │ │   
  │ │          *** NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may │ │   
  │ │          *** also be needed; see USB_STORAGE Help for more info **│ │   
  │ │          *** USB Imaging devices ***                              │ │   
  │ │    < >   USB Mustek MDC800 Digital Camera support                 │ │   
  │ │    < >   USB/IP support                                           │ │   
  │ │    < >   Inventra Highspeed Dual Role Controller (TI, ADI, AW, ...│ │   
  │ └────v(+)───────────────────────────────────────────────────────────┘ │   
  ├───────────────────────────────────────────────────────────────────────┤   
  │       <Select>    < Exit >    < Help >    < Save >    < Load >        │   
  └───────────────────────────────────────────────────────────────────────┘

Device Drivers > USB support > USB Serial Converter support > USB driver for GSM and CDMA modems

 .config - Linux/mips 4.14.195 Kernel Configuration                           
 > Device Drivers > USB support > USB Serial Converter support ────────────── 
  ┌──────────────────── USB Serial Converter support ─────────────────────┐   
  │  Arrow keys navigate the menu.  <Enter> selects submenus ---> (or     │   
  │  empty submenus ----).  Highlighted letters are hotkeys.  Pressing    │   
  │  <Y> includes, <N> excludes, <M> modularizes features.  Press         │   
  │  <Esc><Esc> to exit, <?> for Help, </> for Search.  Legend: [*]       │   
  │ ┌────^(-)───────────────────────────────────────────────────────────┐ │   
  │ │    < >   USB Sierra Wireless Driver                               │ │   
  │ │    < >   USB Symbol Barcode driver (serial mode)                  │ │   
  │ │    < >   USB TI 3410/5052 Serial Driver                           │ │   
  │ │    < >   USB REINER SCT cyberJack pinpad/e-com chipcard reader    │ │   
  │ │    < >   USB Xircom / Entrega Single Port Serial Driver           │ │   
  │ │    <*>   USB driver for GSM and CDMA modems                       │ │   
  │ │    < >   USB ZyXEL omni.net LCD Plus Driver                       │ │   
  │ │    < >   USB Opticon Barcode driver (serial mode)                 │ │   
  │ │    < >   Xsens motion tracker serial interface driver             │ │   
  │ │    < >   USB-Wishbone adapter interface driver                    │ │   
  │ │    < >   USB Quatech SSU-100 Single Port Serial Driver            │ │   
  │ │    < >   USB Quatech Serial Driver for USB 2 devices              │ │   
  │ │    < >   USB Renesas uPD78F0730 Single Port Serial Driver         │ │   
  │ │    < >   USB Debugging Device                                     │ │   
  │ └───────────────────────────────────────────────────────────────────┘ │   
  ├───────────────────────────────────────────────────────────────────────┤   
  │       <Select>    < Exit >    < Help >    < Save >    < Load >        │   
  └───────────────────────────────────────────────────────────────────────┘

Device Drivers > Network device support > USB Network Adapters > Host for RNDIS and ActiveSync devices

 .config - Linux/mips 4.14.195 Kernel Configuration                           
 > Device Drivers > Network device support > USB Network Adapters ─────────── 
  ┌──────────────────────── USB Network Adapters ─────────────────────────┐   
  │  Arrow keys navigate the menu.  <Enter> selects submenus ---> (or     │   
  │  empty submenus ----).  Highlighted letters are hotkeys.  Pressing    │   
  │  <Y> includes, <N> excludes, <M> modularizes features.  Press         │   
  │  <Esc><Esc> to exit, <?> for Help, </> for Search.  Legend: [*]       │   
  │ ┌────^(-)───────────────────────────────────────────────────────────┐ │   
  │ │    < >     SMSC LAN75XX based USB 2.0 gigabit ethernet devices    │ │   
  │ │    < >     SMSC LAN95XX based USB 2.0 10/100 ethernet devices     │ │   
  │ │    < >     GeneSys GL620USB-A based cables                        │ │   
  │ │    < >     NetChip 1080 based cables (Laplink, ...)               │ │   
  │ │    < >     Prolific PL-2301/2302/25A1/27A1 based cables           │ │   
  │ │    < >     MosChip MCS7830 based Ethernet adapters                │ │   
  │ │    <*>     Host for RNDIS and ActiveSync devices                  │ │   
  │ │    < >   Simple USB Network Links (CDC Ethernet subset)           │ │   
  │ │    < >   Sharp Zaurus (stock ROMs) and compatible                 │ │   
  │ │    < >   Conexant CX82310 USB ethernet port                       │ │   
  │ │    < >   Samsung Kalmia based LTE USB modem                       │ │   
  │ │    < >   QMI WWAN driver for Qualcomm MSM based 3G and LTE modems │ │   
  │ │    < >   Option USB High Speed Mobile Devices                     │ │   
  │ │    < >   Intellon PLC based usb adapter                           │ │   
  │ └────v(+)───────────────────────────────────────────────────────────┘ │   
  ├───────────────────────────────────────────────────────────────────────┤   
  │       <Select>    < Exit >    < Help >    < Save >    < Load >        │   
  └───────────────────────────────────────────────────────────────────────┘

此时可以看到设备下面模拟串口ttyACM

root@OpenWrt:/dev# ls tty*
tty      ttyACM0  ttyACM1  ttyS0    ttyS1    ttyS2

另外，还要根据4g模块手册，按需添加相应的USB厂商信息，以及零包处理等。。。

仅此记录

eric.pyt

关注

1
点赞
踩
41

收藏

觉得还不错? 一键收藏
2
评论
openwrt接入usb 4g网络

openwrt 稍加配置可以接入usb 4G网卡，进行上网。本节利用手机usb网络共享功能，进行配置操作usb 网络共享、usb 4G网卡、pcie 4G网卡，其实本质上透过rndis驱动进行网络转发openwrt版本19.07openwrt rndis驱动配置，开启kmod-usb-net-rndis .config - OpenWrt Configuration > Kernel modules > USB Support ──────────────────────────.
复制链接

扫一扫