Oracle®融合中间件的Oracle Service Bus的错误消息，以及错误的解决办法 11g Release 1 (11.1.1.3) 11g第1版（11.1.1.3）

Oracle®融合中间件的Oracle Service Bus的错误消息，以及错误的解决办法 11g Release 1 (11.1.1.3) 11g第1版（11.1.1.3）

BEA-473050
 Error: Monitoring has been disabled for the domain 错误：监控已被禁用的域

Description 描述
 Monitoring for this domain has been disabled.监测这一领域已被禁用。 When the monitoring is disabled statistics are not collected.当监控被禁用的统计数据没有收集。 Hence you cannot retrieve statistics while monitoring is disabled.因此，你可以不获取统计信息，同时监控被禁用。 
Cause 导致
 Monitoring for this domain has been disabled.监测这一领域已被禁用。 
Action 行动
 Enable monitoring for this domain.启用此域监测。 Go to Global Settings under System Administration and enable monitoring.转到“系统管理”下的“全局设置”，启用监视。 You need to open a session using change center to do this.你需要打开一个会话，使用更改中心做到这一点。  
 
BEA-473051
 Error: Aggregator did not receive statistics from servers for the current view 错误：聚合没有得到服务器的统计数据当前视图的

Description 描述
 There is a communication failure between Aggregator server and other managed servers.聚合服务器和其他管理服务器之间存在通信故障。 One of the managed servers failed to send statistics to the managed server on which Aggregator is running.的托管服务器的托管服务器上运行聚合器是发送失败的统计数据。 
Cause 导致
 Communication failure between managed servers.管理服务器之间的通信失败。 
Action 行动
 Wait for some time and try again.等待一段时间，然后再试一次。  
 
BEA-473052
 Error: Reset statistic Task Failed e 错误：复位统计任务故障的E

Description 描述
 There is an error while trying to reset the statistics.有一个错误在尝试重置的统计数据。 There may be a problem while creating a session and committing it in the background.有可能是一个问题，而创建一个会话，并承诺在后台。 
Cause 导致
 Session commit failed due to a conflict or due to some configuration problems.会议提交失败，由于冲突或由于一些配置问题。 
Action 行动
 Wait for some time and try again.等待一段时间，然后再试一次。  
 
BEA-473053
 Error: Reset Unsuccessful: Weblogic Session lock held by user 错误：复位不成功：Weblogic的会话锁的用户

Description 描述
 Some one opened a session on Weblogic for editing WLS configuration.有些人开了一个会议，在W​​eblogic上编辑WLS配置。 
Cause 导致
 A lock already exists on WLS Configuration. WLS配置上的锁已经存在。 
Action 行动
 Release the existing lock on weblogic server and try again.释放现有锁在WebLogic Server上，然后再试一次。 Go to weblogic console and Activate or Undo all changes. weblogic控制台，激活或撤消所有更改。  
 
BEA-473054
 Info: (Statistics reset) 信息：（统计复位）

Description 描述
 This message is used as a description for the session created in the background while resetting statistics.此消息被用作复位统计时在后台创建的会话的描述。  
 
BEA-473055
 Error: Failed to get data from resource due to t 错误：无法从资源中获取数据 ， 由于 T

Description 描述
 Information about a service could not be retrieved.无法检索有关服务的信息。 This may be because the service is not found in the domain.这可能是因为该服务未发现域。 
Cause 导致
 Service could have been deleted, renamed, moved or never existed.服务可能已被删除，重命名，移动，或者根本不存在。 
Action 行动
 Check if the service exists and try with correct service ref again.检查服务是否存在，并再次尝试用正确的服务参考。  
 
BEA-473056
 Error: Failed to reset statistics for serviceDesc services due to t 错误：无法重置由于 T serviceDesc服务的统计

Description 描述
 There is an error while trying to reset the statistics.有一个错误在尝试重置的统计数据。 There may be a problem while creating a session and committing it in the background.有可能是一个问题，而创建一个会话，并承诺在后台。 
Cause 导致
 Session commit failed due to a conflict or due to some configuration problems.会议提交失败，由于冲突或由于一些配置问题。 
Action 行动
 Wait for some time and try again.等待一段时间，然后再试一次。  
 
BEA-473057
 Error: Failed to get statistics for services due to t 错误：无法获得的统计信息服务由于 T

Description 描述
 There is a problem while trying to retrieve statistics for a service.这里有一个问题，而试图获取统计信息的服务。 
Cause 导致
 This may be because the arguments passed to the API are not proper.这可能是因为传递给API的参数是不正确的。 
Action 行动
 Check the arguments passed to API and try again.检查传递给API的参数，然后再试一次。  
 
BEA-473058
 Error: Failed to get statistics for services as operation operation returned null. 错误：无法获得的统计信息服务的运行操作返回null。

Description 描述
 Monitoring runtime did not return any statistics for a service.监控运行时没有返回任何统计数据的服务。  
 
BEA-473059
 Error: INTERNAL_PROCESSING_ERROR: desc 产品错误：INTERNAL_PROCESSING_ERROR：DESC

Description 描述
 Used to represent an internal error in the monitoring runtime.用于监测运行时的一个内部错误。 
Cause 导致
 This may be because an unrecognized statistic type is returned by the monitoring runtime.这可能是因为无法识别的统计监测运行时类型，则返回。  
 
BEA-473060
 Error: INTERNAL_PROCESSING_ERROR: desc due to t 错误：INTERNAL_PROCESSING_ERROR：DESC由于 T

Description 描述
 Used to represent an internal error in the monitoring runtime.用于监测运行时的一个内部错误。  
 
BEA-473061
 Warning: Statistics for service service is not yet reported on aggregation server. 警告：尚未上报统计服务服务聚合服务器。

Description 描述
 This can happen if service is turned on for monitoring and statistics for the service are yet to be reported to aggregetor server (this can happen just before check point)这可能发生，如果服务是开启的监测和统计的服务还有待报aggregetor服务器（这可能发生，只是检查点之前） 
Cause 导致
 Aggregator server not received statistics yet.聚合服务器接收的统计。 
Action 行动
 Try after a minute or two.尝试后一到两分钟。  
 
BEA-473062
 Error: paramValue is incorrect value for parameter paramName as it specifies a bitmap which does not represent valid combinations of resource types. 错误：paramValue是不正确的值参数PARAMNAME，为它指定一个位图，这并不代表资源类型的有效组合。

Description 描述
 You should send a valid combination of bits while retrieving statistics.你应该给位的有效组合，而检索统计。 The values from 1 to 15 are allowed.从1到15的值是允许的。 
Cause 导致
 Invalid argument passed.传递的参数无效。 
Action 行动
 Correct the resourceTypes argument and try again.更正resourceTypes参数，然后再试一次。  
 
BEA-473063
 Error: paramValue is incorrect value for parameter paramName as it specifies a bitmap that has bits set for one or more resource types, which are not applicable to business service. 错误：paramValue是不正确的值参数PARAMNAME，为它指定一个位图，位设置的一个或多个资源类型，这是不适用的业务服务。

Description 描述
 This may be because you had set the second bit which is for FLOW_COMPONENT type while retrieving business service statistics.这可能是因为你已经设置了第二位，其中是为FLOW_COMPONENT型，同时获取商业服务统计。 
Cause 导致
 Invalid argument passed.传递的参数无效。 
Action 行动
 Correct the bit combination and try again更正位组合，然后再试一次  
 
BEA-473064
 Error: Parameter pName is invalid as it contains one or more type services. 错误：参数pname是无效的，因为它包含一个或多个类型的服务。

Description 描述
 You would have requested for business service statistics but you have sent a proxy ref as an argument to API.你会曾要求商业服务统计，但已将代理ref用作API的一个参数。 Or you would have requested for proxy service statistics but you have sent a business service ref as an argument to API.或者，你会要求代理服务统计，作为一个参数传递给API，但你已将业务服务的文献。 
Cause 导致
 Invalid argument passed.传递的参数无效。 
Action 行动
 Correct the ref array argument and try again.更正文献数组参数，然后再试一次。  
 
BEA-473065
 Error: Could not find service - serviceName . 错误：无法找到服务- SERVICENAME。 It is either renamed or moved or deleted or never existed...被重命名或移动或删除，或者根本不存在...

Description 描述
 Service for which you are trying to retrive statistics does not exist.您正试图以检索统计服务不存在。 It could have been deleted, moved, renamed or never existed.它可能已被删除，移动，重命名或根本不存在。 
Cause 导致
 Service have been deleted, moved, renamed or never existed.服务已被删除，移动，重命名或根本不存在。 
Action 行动
 Check if the service exists and try with the correct service ref.检查服务是否存在，并尝试用正确的服务参考。  
 
BEA-473066
 Error: Monitoring has been disabled for the service - serviceName 错误：监控已被禁用的服务- SERVICENAME

Description 描述
 Monitoring has been disabled for the Sservice for which you are trying to retrieve or reset statistics.监控的Sservice您尝试检索或重置统计数据已被禁用。 
Cause 导致
 Monitoring for the service has been disabled.监测服务已被禁用。 
Action 行动
 Enable the monitoring for this service.启用这项服务的监测。 Go to View Proxy/Business Service page and click on Operational Settings Tab.请查看代理/商业服务“页面，然后点击”操作设置“选项卡上。 You can enable monitoring here.您可以在这里启用监控。 To do this you need to open a session using change center.要做到这一点，你需要打开一个会话使用更改中心。  
 
BEA-473067
 Error: The value of parameter paramName is invalid as reason . 错误：参数PARAMNAME的价值是无效的理由 。

Description 描述
 One of the argument passed to public API contains an invalid value.公共API的参数传递一个包含无效的值。 
Cause 导致
 Invalid argument passed.传递的参数无效。 
Action 行动
 Correct the arguments to API and try again.更正参数的API，然后再试一次。  
 
BEA-473068
 Error: The value of aggregation interval aggInt is invalid. 错误：聚集间隔aggInt的价值是无效的。

Description 描述
 The service cannot be monitored at the specified Aggregation Interval.该服务无法在指定的集结时间间隔进行监视。 
Cause 导致
 Invalid Aggregation Interval specified.聚合指定的时间间隔无效。 
Action 行动
 Change the Aggregation Interval to one of the valid aggregation Intervals.更改的聚集间隔的有效聚集时间。  
 
BEA-473069
 Error: paramValue is incorrect value for parameter paramName as it specifies a bitmap that has bits set for one or more resource types, which are not applicable to proxy service. 错误：paramValue是不正确的值参数PARAMNAME，为它指定一个位图，位设置的一个或多个资源类型，这是不是适用于代理服务。

Description 描述
 You would have specified the fourth bit which is for URI type in resourceTypes argument while retrieving proxy service statistics.您已经指定了第四位，这是URI类型的resourceTypes参数，而检索代理服务统计的。 Proxy Services do not have URI type statistics.代理服务没有URI类型的统计。 
Cause 导致
 Invalid Argument passed.传递的参数无效。 
Action 行动
 Correct the resourceTypes argument and try again.更正resourceTypes参数，然后再试一次。