交叉编译GDB工具, 使GDB运行在嵌入式板子上
1:下载gdb-7.3a.tar.gz (本示例使用gdb-7.3.a)
2: 解压上文件
tar –zxvf gdb-7.3a.tar.gz
3: 开始配置编译
(1):进入目录, 上述解压生成默认的目录是gdb-7.3
(2): ./configure --target=mipsel-linux --host=mipsel-linux --program-prefix=mipsel-linux --prefix=/home/Samman/test/gdb-7.3/sunyg CC=/opt/buildroot-gcc342/bin/mipsel-linux-gcc --enable-static
--target=>目标平台 当前制定为mips, 或者arm-linux
--host=>程序运行的机器, 注意这个值会影响程序里面的ar等命令的前缀,
如上述, 指定host为mipsel-linux, 那么程序文件的makefile 里面的就会出现AR=mipsel-linux-ar
--program-prefix 制定生成gdb, gdbserver 名字前面会加上这些
--prefix 指定 make install 的安装目录, 当前使用绝对路径, 最后成功的话, 会在sunyg目录生成 mipsel-linux-gdb…….
CC 指定交叉编译工具
--enable-static 静态加载库
4: make;make install
5:特别注意
(1): 需要指定环境变量,export PATH=$PATH:/opt/buildroot-gcc342/bin
程序执行时会用到其他的交叉编译工具 mipsel-linux-ar, mipsel-linux-strip等等
(2) 这个版本编译需要文件gdbreplay.c 中变量fromgdb 这个值初始化 (赋值为0即可)
6: 恭喜你, 大功告成
file sunyg/* 查看文件, 是否为static , 是否striped, 默认应该没有
你可以手动strip
Mipsel-linux-strip mispel-linux-gdb –o mipsel-linux-gdb
以下是configure的help
./configure --help
`configure' configures this package to adapt to many kinds of systems.
Usage: ./configure [OPTION]... [VAR=VALUE]...
To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE. See below for descriptions of some of the useful variables.
Defaults for the options are specified in brackets.
Configuration:
-h, --help display this help and exit
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
-q, --quiet, --silent do not print `checking...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for `--cache-file=config.cache'
-n, --no-create do not create output files
--srcdir=DIR find the sources in DIR [configure dir or `..']
Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
[/usr/local]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[PREFIX]
By default, `make install' will install all the files in
`/usr/local/bin', `/usr/local/lib' etc. You can specify
an installation prefix other than `/usr/local' using `--prefix',
for instance `--prefix=$HOME'.
For better control, use the options below.
Fine tuning of the installation directories:
--bindir=DIR user executables [EPREFIX/bin]
--sbindir=DIR system admin executables [EPREFIX/sbin]
--libexecdir=DIR program executables [EPREFIX/libexec]
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
--datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
--datadir=DIR read-only architecture-independent data [DATAROOTDIR]
--infodir=DIR info documentation [DATAROOTDIR/info]
--localedir=DIR locale-dependent data [DATAROOTDIR/locale]
--mandir=DIR man documentation [DATAROOTDIR/man]
--docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
--htmldir=DIR html documentation [DOCDIR]
--dvidir=DIR dvi documentation [DOCDIR]
--pdfdir=DIR pdf documentation [DOCDIR]
--psdir=DIR ps documentation [DOCDIR]
Program names:
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM run sed PROGRAM on installed program names
System types:
--build=BUILD configure for building on BUILD [guessed]
--host=HOST cross-compile to build programs to run on HOST [BUILD]
--target=TARGET configure for building compilers for TARGET [HOST]
Optional Features:
--disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--enable-gold[=ARG] build gold [ARG={default,yes,no}]
--enable-ld[=ARG] build ld [ARG={default,yes,no}]
--disable-libquadmath do not build libquadmath directory
--disable-libquadmath-support
disable libquadmath support for Fortran
--enable-libada build libada directory
--enable-libssp build libssp directory
--enable-build-with-cxx build with C++ compiler instead of C compiler
--disable-ppl-version-check
disable check for PPL version
--enable-cloog-backend[=BACKEND]
set the CLooG BACKEND used to either isl, ppl or
ppl-legacy (default)
--disable-cloog-version-check
disable check for CLooG version
--enable-lto enable link time optimization support
--enable-stage1-languages[=all]
choose additional languages to build during stage1.
Mostly useful for compiler development
--enable-objc-gc enable use of Boehm's garbage collector with the GNU
Objective-C runtime
--enable-bootstrap enable bootstrapping [yes if native build]
--enable-serial-[{host,target,build}-]configure
force sequential configuration of sub-packages for
the host, target or build machine, or all
sub-packages
--enable-maintainer-mode
enable make rules and dependencies not useful (and
sometimes confusing) to the casual installer
--enable-stage1-checking[=all]
choose additional checking for stage1 of the
compiler
--enable-werror enable -Werror in bootstrap stage2 and later
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-build-libsubdir=DIR Directory where to find libraries for build system
--with-mpc=PATH specify prefix directory for installed MPC package.
Equivalent to --with-mpc-include=PATH/include plus
--with-mpc-lib=PATH/lib
--with-mpc-include=PATH specify directory for installed MPC include files
--with-mpc-lib=PATH specify directory for the installed MPC library
--with-mpfr-dir=PATH this option has been REMOVED
--with-mpfr=PATH specify prefix directory for installed MPFR package.
Equivalent to --with-mpfr-include=PATH/include plus
--with-mpfr-lib=PATH/lib
--with-mpfr-include=PATH
specify directory for installed MPFR include files
--with-mpfr-lib=PATH specify directory for the installed MPFR library
--with-gmp-dir=PATH this option has been REMOVED
--with-gmp=PATH specify prefix directory for the installed GMP
package. Equivalent to
--with-gmp-include=PATH/include plus
--with-gmp-lib=PATH/lib
--with-gmp-include=PATH specify directory for installed GMP include files
--with-gmp-lib=PATH specify directory for the installed GMP library
--with-host-libstdcxx=L use linker arguments L to link with libstdc++ when
linking with PPL
--with-stage1-ldflags=FLAGS
linker flags for stage1
--with-stage1-libs=LIBS libraries for stage1
--with-boot-libs=LIBS libraries for stage2 and later
--with-boot-ldflags=FLAGS
linker flags for stage2 and later
--with-ppl=PATH specify prefix directory for the installed PPL
package. Equivalent to
--with-ppl-include=PATH/include plus
--with-ppl-lib=PATH/lib
--with-ppl-include=PATH specify directory for installed PPL include files
--with-ppl-lib=PATH specify directory for the installed PPL library
--with-cloog=PATH Specify prefix directory for the installed CLooG-PPL
package. Equivalent to
--with-cloog-include=PATH/include plus
--with-cloog-lib=PATH/lib
--with-cloog-include=PATH
Specify directory for installed CLooG include files
--with-cloog-lib=PATH Specify the directory for the installed CLooG
library
--with-build-sysroot=SYSROOT
use sysroot as the system root during the build
--with-debug-prefix-map='A=B C=D ...'
map A to B, C to D ... in debug information
--with-build-config='NAME NAME2...'
use config/NAME.mk build configuration
--with-build-time-tools=PATH
use given path to find target tools during the build
Some influential environment variables:
CC C compiler command
CFLAGS C compiler flags
LDFLAGS linker flags, e.g. -L if you have libraries in a
nonstandard directory
LIBS libraries to pass to the linker, e.g. -l
CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if
you have headers in a nonstandard directory
CXX C++ compiler command
CXXFLAGS C++ compiler flags
build_configargs
additional configure arguments for build directories
host_configargs
additional configure arguments for host directories
target_configargs
additional configure arguments for target directories
AR AR for the host
AS AS for the host
DLLTOOL DLLTOOL for the host
LD LD for the host
LIPO LIPO for the host
NM NM for the host
RANLIB RANLIB for the host
STRIP STRIP for the host
WINDRES WINDRES for the host
WINDMC WINDMC for the host
OBJCOPY OBJCOPY for the host
OBJDUMP OBJDUMP for the host
CC_FOR_TARGET
CC for the target
CXX_FOR_TARGET
CXX for the target
GCC_FOR_TARGET
GCC for the target
GCJ_FOR_TARGET
GCJ for the target
GFORTRAN_FOR_TARGET
GFORTRAN for the target
GOC_FOR_TARGET
GOC for the target
AR_FOR_TARGET
AR for the target
AS_FOR_TARGET
AS for the target
DLLTOOL_FOR_TARGET
DLLTOOL for the target
LD_FOR_TARGET
LD for the target
LIPO_FOR_TARGET
LIPO for the target
NM_FOR_TARGET
NM for the target
OBJDUMP_FOR_TARGET
OBJDUMP for the target
RANLIB_FOR_TARGET
RANLIB for the target
STRIP_FOR_TARGET
STRIP for the target
WINDRES_FOR_TARGET
WINDRES for the target
WINDMC_FOR_TARGET
WINDMC for the target
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
Report bugs to the package provider.
[root@localhost gdb-7.3]#
重点提示:
多线程调试时, 会出现 Program received signal SIG32, Real-time event 32 的解决办法
1:在gdb模式下,执行 handle SIG32 pass noprint nostop
2:编译程序时, gcc 加上-static